HG/T 21608-2012Engineering technical requirements for liquid loading arms (English PDF)
液体装卸臂工程技术要求
This is a limited preview
Buy now to download the full PDF (90 pages)
Need quotation for your management?
Get a formal quotation for HG/T 21608-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
HG/T 21608-2012 is the English-translated version of 液体装卸臂工程技术要求.
HG/T 21608-2012 is the Chinese chemical industry standard setting the engineering technical requirements for liquid loading arms.
It covers arms of nominal rating CL150 and CL300 or PN2.5 through PN63, for design temperatures between -196 °C and 250 °C. The equipment is used to load and unload a range of petrochemical liquids to and from road tank trucks, rail tank cars and tank vessels.
Its design and fabrication refer to national standards including GB 146-1983, GB/T 700-2006, GB/T 985.1-2008, GB/T 3766-2001, GB 3836.1-2000, GB 5044-1985 and GB/T 7935-2005.
It replaces HG/T 21608-1996. Issued on 24 May 2012, it has applied since 1 November 2012.
Found what you need?
Document preview — HG/T 21608-2012
National Standard of the People's Republic of China
- ICS
- 53.040
- Replacing
- HG/T 21608-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 21608-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
It replaces the earlier edition HG/T 21608-1996.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry standard setting the engineering technical requirements for liquid loading arms. It covers arms of nominal rating CL150 and CL300 or PN2.5 through PN63, for design temperatures between -196 °C and 250 °C. The equipment is used to load and unload a range of petrochemical liquids to and from road tank trucks, rail tank cars and tank vessels. Its design and fabrication refer to national standards including GB 146-1983, GB/T 700-2006, GB/T 985.1-2008, GB/T 3766-2001, GB 3836.1-2000, GB 5044-1985 and GB/T 7935-2005. It replaces HG/T 21608-1996.
HG/T 21608-2012 falls under ICS 53.040, in the field of materials handling equipment.
This catalogue holds 18 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 146-1983
GB/T 700-2006 — Carbon structural steels
GB/T 985.1-2008 — Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
GB/T 985.3-2008 — Chemical reagent -- Sodium sulfate anhydrous
GB/T 3766-2001 — Hydraulic fluid power - General rules relating to systems
GB 3836.1-2000 — Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
GB/T 4437.1-2000 — Aluminium and aluminium alloy extruded tubes. Part 1: Seamless tubes
GB/T 4437.2- 2003 — Aluminium and aluminium alloy extruded tubes - Part 2: Seam tubes
GB 5044-1985 — Classification of health hazard levels from occupational exposure to toxic substances
GB/T 5117-1995 — Carbon steel covered electrodes
GB/T 5118-1995 — Low alloy steel covered electrodes
GB/T 5293-1999 — Carbon steel electrodes and fluxs for submerged arc welding
GB/T 7935-2005 — Hydraulic fluid power - General requirements for hydraulic components
GB/T 7932-2003 — Pneumatic fluid power - General rules relating to systems
GB/T 8110-2008 — Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steel
GB 8918-2006 — [GB/T 8918-2006] Steel wire ropes for important purpose
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 90 pages
5 Related standards
Other editions:
HG/T 21608-1996 (earlier edition)
Standards on related subjects:
GB/T 18849-2023 — Powered industrial trucks - Brake performance and component strength
GB/T 22419-2023 — Industrial trucks - Specifications for indicator lights for container handling and grappler arm operations
GB/T 26949.1-2020 — Industrial trucks - Verification of stability - Part 1: General
6 Classification and status
International classification (ICS): 53.040
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 90 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 700-2006Carbon structural steels
- GB/T 985.1-2008Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
- GB/T 985.3-2008Recommended joint preparation for gas-shield arc welding on aluminium and its alloys
- GB/T 3766-2001Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB 3836.1-2000[Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
- GB/T 4437.1-2000Aluminium and aluminium alloys extruded tubes—Part 1: Seamless tubes
GB 146-1983
Similar standards
Editions of HG/T 21608
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 21608-2012 | Engineering technical requirements for liquid loading arms | current edition | Current |
| HG/T 21608-1996 | Engineering technical requirements for liquid loading arms | previous edition | Superseded |
This page sells the current edition, HG/T 21608-2012. Earlier editions are listed for reference only.
How to Download HG/T 21608-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 3836.1-2000 — Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
GB 5044-1985 — Classification of health hazard levels from occupational exposure to toxic substances
GB 8918-2006 — [GB/T 8918-2006] Steel wire ropes for important purpose
HG/T 21608-2012
$1,520.00