Valid

HG/T 2140-2015Glass-lined reducing flanges (English PDF)

搪玻璃异径法兰

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2140-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 14, 2015

Implementation date

January 1, 2016

Scope

HG/T 2140-2015 is the English-translated version of 搪玻璃异径法兰.

HG/T 2140-2015 is a recommended Chinese chemical industry standard for glass-lined reducing flanges, pipe fittings whose body carries a vitreous enamel lining. It gives the types, basic parameters and main dimensions of the fitting, its technical requirements, and the rules for works documents, packaging, transport and storage.

It applies to glass-lined reducing flanges with a nominal pressure of not more than PN10 and a design temperature above -20 °C and up to 200 °C. GB/T 1804, GB/T 5782, GB/T 6170, GB 25025 and HG/T 20592 are quoted in the text.

It supersedes HG/T 2140-2009. Issued on 14 July 2015, it has applied since 1 January 2016.

Found what you need?

Document preview — HG/T 2140-2015

National Standard of the People's Republic of China

ICS
25.220.50
Replacing
HG/T 2140-2009

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 2140-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.

It replaces the earlier edition HG/T 2140-2009, HG/T 2140-1991.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese chemical industry standard for glass-lined reducing flanges, pipe fittings whose body carries a vitreous enamel lining. It gives the types, basic parameters and main dimensions of the fitting, its technical requirements, and the rules for works documents, packaging, transport and storage. It applies to glass-lined reducing flanges with a nominal pressure of not more than PN10 and a design temperature above -20 °C and up to 200 °C. GB/T 1804, GB/T 5782, GB/T 6170, GB 25025 and HG/T 20592 are quoted in the text. It supersedes HG/T 2140-2009.

HG/T 2140-2015 falls under ICS 25.220.50, in the field of manufacturing engineering.

This catalogue holds 8 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 1804

GB/T 5782

GB/T 6170

GB 25025

HG/T 20592

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 2140-2009 (earlier edition)

HG/T 2140-1991 (earlier edition)

Standards on related subjects:

GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment

GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing

HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy

HG/T 2138-2022 — Glass-lined concentric reducers, eccentric reducers and reducing flanges

HG/T 2136-2022 — Glass-lined tees and crosses

HG/T 2130-2021 — Glass-lined pipes

6 Classification and status

International classification (ICS): 25.220.50

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2140

EditionTitleRevisionStatus
HG/T 2140-2015Glass-lined reducing flangescurrent editionCurrent
HG/T 2140-2009Glass-lined reducing flangesprevious editionSuperseded

This page sells the current edition, HG/T 2140-2015. Earlier editions are listed for reference only.

How to Download HG/T 2140-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2140-2015

$95.00