HG/T 2137-2015Glass-lined crosses (English PDF)
搪玻璃四通
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2137-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 14, 2015
Implementation date
January 1, 2016
Scope
HG/T 2137-2015 is the English-translated version of 搪玻璃四通.
HG/T 2137-2015 is a recommended Chinese chemical industry standard covering glass-lined crosses, the four-way fittings used in enamelled piping. It states the types, basic parameters and main dimensions of the cross, its technical requirements, and the rules on works documents, packaging, transport and storage.
The fittings within its scope are those with a nominal pressure of not more than PN10 and a design temperature above -20 °C and up to 200 °C. GB/T 1804, GB/T 12459, GB/T 20801.5, GB 25025 and HG/T 2143 are the standards it quotes.
It replaces HG/T 2137-2009. Issued on 14 July 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — HG/T 2137-2015
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 2137-2009
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2137-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.
It replaces the earlier edition HG/T 2137-2009, HG/T 2137-1991.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese chemical industry standard covering glass-lined crosses, the four-way fittings used in enamelled piping. It states the types, basic parameters and main dimensions of the cross, its technical requirements, and the rules on works documents, packaging, transport and storage. The fittings within its scope are those with a nominal pressure of not more than PN10 and a design temperature above -20 °C and up to 200 °C. GB/T 1804, GB/T 12459, GB/T 20801.5, GB 25025 and HG/T 2143 are the standards it quotes. It replaces HG/T 2137-2009.
HG/T 2137-2015 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1804
GB/T 12459
GB/T 20801.5
GB 25025
HG/T 2143
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2137-2009 (earlier edition)
HG/T 2137-1991 (earlier edition)
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy
HG/T 2138-2022 — Glass-lined concentric reducers, eccentric reducers and reducing flanges
HG/T 2136-2022 — Glass-lined tees and crosses
HG/T 2130-2021 — Glass-lined pipes
6 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 12459Steel buttwelding piping fittings - Types and parameters
- GB/T 20801.5Pressure piping code - Part 5: Hydrogen piping and pipelines
- GB 25025Specification of glass-lined equipment for industry
- HG/T 2143Glass-lined equipment - Nozzles
Similar standards
Editions of HG/T 2137
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2137-2015 | Glass-lined crosses | current edition | Current |
| HG/T 2137-2009 | Glass-lined crosses | previous edition | Superseded |
This page sells the current edition, HG/T 2137-2015. Earlier editions are listed for reference only.
How to Download HG/T 2137-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 25025-2010 — Specification of glass-lined equipment for industry
GB/T 12459-1990 — Steel butt-welding seamless pipe fittings
GB/T 12459-2005 — Steel butt-welding seamless pipe fittings
HG/T 2137-2015
$95.00