HG/T 2070-2023Rubber compression flexometers (English PDF)
橡胶压缩屈挠试验机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2070-2023 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 28, 2023
Implementation date
February 1, 2024
Scope
HG/T 2070-2023 is the English-translated version of 橡胶压缩屈挠试验机.
HG/T 2070-2023 is the Chinese standard "Rubber compression flexometers". Its scope clause reads: This standard specifies the structure, requirements, inspection methods, inspection rules, markings, packaging, transportation, storage and accompanying documents of rubber compression flexure testing machines.
This standard is applicable to instruments for measuring the compression and flexural properties of vulcanized rubber with a hardness of 30IRHD to 85IRHD.
Found what you need?
Document preview — HG/T 2070-2023
National Standard of the People's Republic of China
- Replacing
- HG/T 2070-2009
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
1 Scope
This standard specifies the structure, requirements, inspection methods, inspection rules, markings, packaging, transportation, storage and accompanying documents of rubber compression flexure testing machines.
This standard is applicable to instruments for measuring the compression and flexural properties of vulcanized rubber with a hardness of 30IRHD to 85IRHD.
Foreword
This document was issued on 28 July 2023 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 February 2024.
It replaces HG/T 2070-2009.
The document is under the responsibility of the Ministry of Industry and Information Technology.
About this edition
HG/T 2070-2023 is the current edition. It was issued on 28 July 2023 and has been in force since 1 February 2024, replacing HG/T 2070-2009.
HG/T 2070-2009 has been superseded: a specification that still cites it is citing a withdrawn edition.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
HG/T 2070-2023 replaces HG/T 2070-2009. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
HG/T 2070-2023 carries no ICS number in the official record.
The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.
How this standard is designated
The full designation is HG/T 2070-2023. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of HG/T 2070
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2070-2023 | Rubber compression flexometers | current edition | Current |
| HG/T 2070-2009 | Rubber compression flexometers | previous edition | Superseded |
This page sells the current edition, HG/T 2070-2023. Earlier editions are listed for reference only.
How to Download HG/T 2070-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 2070-2023
$120.00