HG/T 20583-2020Code for structural design of steel chemical vessels (English PDF)
钢制化工容器结构设计规范
This is a limited preview
Buy now to download the full PDF (92 pages)
Need quotation for your management?
Get a formal quotation for HG/T 20583-2020 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 9, 2020
Implementation date
April 1, 2021
Scope
HG/T 20583-2020 is the English-translated version of 钢制化工容器结构设计规范.
HG/T 20583-2020 is the Chinese chemical industry standard covering code for structural design of steel chemical vessels. It was issued on 9 December 2020 and has been in force since 1 April 2021, replacing HG/T 20583-2011.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2020 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — HG/T 20583-2020
National Standard of the People's Republic of China
- Replacing
- HG/T 20583-2011
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 General provisions 1
- 2 Terms and symbols 1
- 2.1 Terms 1
- 2.2 Symbols 2
- 3 Cylinder, covers and their connection 3
- 3.1 Cylinder 3
- 3.2 Covers 4
- 3.3 Connection between cover and others 5
- 4 Flanges, gaskets, bolts and nuts 5
- 4.1 Shell flange 5
- 4.2 Nozzle flange 7
- 4.3 Special flange 8
- 4.4 Gasket 8
- 4.5 Bolts and nuts 9
- 5 Manhole, hand hole and inspecting hole 11
- 5.1 Principle
- 5.2 Quantity
- 5.3 Location
- 5.4 Type
- 5.5 Size
- 5.6 Ladder
- 6 Openings, reinforcement and nozzles 15
- 6.1 Opening
- 6.2 Reinforcement for opening
- 6.3 Nozzle
- 7 Liquid level meter, sight glass, thermometer and pressure gauge 22
- 7.1 Liquid level meter
- 7.2 Sight glass
- 7.3 Thermometer
- 7.4 Pressure gauge
- 8 Pressure relief devices 25
- 8.1 Principle
- 8.2 Connection pipe and flow area for relief device
- 8.3 Connection pipe for relief device
- 9 Supports 26
- 9.1 Saddle support
- 9.2 Leg support
- 9.3 Lug support
- 9.4 Bracket support
- 9.5 Support lug with rigid rings
- 9.6 Skirt support
1 Foreword
HG/T 20583-2020 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 December 2020 and has been in force since 1 April 2021.
It replaces the earlier edition HG/T 20583-2011.
This standard is a revision of HG/T 20583-2011 Specification of structural design for steel chemical vessels according to the requirements of Plan for the development and revision of the third batch of professional standards in 2017 (GONGXINTINGKE [2017], No.106) issued by the Ministry of Industry and Information Technology. It was prepared by Sedin Engineering Co., Ltd., the chief development organization, jointly with other participating development organizations under the organization of the National Technology Center of Process Equipment entrusted by the editorial department of the standard - China Petroleum & Chemical Engineering Survey and Design Association (CPCEA).
This standard replaces HG/T 20583-2011 Specification of structural design for steel chemical vessels from the implementation date hereof.
During the revision process of this standard, the drafting group, through extensive investigation and careful summarization of practical experience in engineering structural design, construction process, quality control and engineering quality acceptance of steel chemical vessels in China and reference to a large amount of information of engineering technology application of domestic and foreign engineering companies, reviewed and finalized the standard, on the basis of extensive consultation.
This standard consists of 15 clauses and 5 annexes, with the main contents as follows: general provisions; terms and symbols; cylinder, covers and their connection; flange, gaskets, bolts and nuts; man hole, hand hole and inspecting hole; openings, reinforcement and nozzles; liquid level meter, sight glass, thermometer and pressure gauge; pressure relief devices; supports; baffles at inlet and outlet; lifting lugs and davit; lighting rods, earth lug and name plate support; welding pads, insulation tacks and insulation rings; size of outsize profile and limitation of transportation; welding structure.
23. Some clauses that are inconsistent with relevant standards are revised.
2 Scope Preview
HG/T 20583-2020 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,854 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 92 pages
4 Related standards
Other editions:
HG/T 20583-2011 (earlier edition)
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 20582-2020 — Code for strength calculation of steel chemical vessels
HG/T 20581-2020 — Code for material selection of steel chemical vessels
HG/T 20580-2020 — Code for basic design of steel chemical vessels
5 Classification and status
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 92 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 20583
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 20583-2020 | Code for structural design of steel chemical vessels | current edition | Current |
| HG/T 20583-2011 | Code for structural design of steel chemical vessels | previous edition | Superseded |
This page sells the current edition, HG/T 20583-2020. Earlier editions are listed for reference only.
How to Download HG/T 20583-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 20583-2020
$1,100.00