Valid

GB/Z 43414-2023Non-destructive testing - NDT training syllabuses (English PDF)

无损检测 无损检测培训大纲

Preview PDF

This is a limited preview

Buy now to download the full PDF (96 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 43414-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 27, 2023

Implementation date

November 27, 2023

Scope

GB/Z 43414-2023 is the English-translated version of 无损检测 无损检测培训大纲.

GB/Z 43414-2023 is a Chinese national guidance document, identical to ISO/TS 25107:2019, that sets out training syllabuses for non-destructive testing personnel.

It gives requirements and recommendations for structured training at Levels 1, 2 and 3, aligned with the qualification examinations of ISO 9712 (GB/T 9445).

Separate syllabuses cover radiographic, ultrasonic, eddy current, penetrant, magnetic particle, leak, acoustic emission, visual, thermal imaging and strain testing, together with a section on new technologies.

It also explains how training hours add up for candidates entering directly at Level 2 or Level 3, and when extra content in mathematics or materials and processes should be considered.

Requirements for the training organisations themselves are left to ISO/TS 25108. Issued on 27 November 2023, it has applied since 27 November 2023.

Found what you need?

Document preview — GB/Z 43414-2023

National Standard of the People's Republic of China

ICS
19.100
Classification
J 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • PrefaceI
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Summary
  • 5 Radiographic testing (RT)---Level 1, Level 2, Level 3
  • 6 Ultrasonic testing (UT)---Level 1, Level 2, Level 3
  • 7 Eddy Current Testing (ET)---Level 1, Level 2, Level 3
  • 8 Penetration Testing (PT)---Level 1, Level 2, Level 3
  • 9 Magnetic particle testing (MT)---Level 1, Level 2, Level 3
  • 10 Leak detection (LT)---Level 1, Level 2, Level 3
  • 11 Acoustic emission testing (AT)---Level 1, Level 2, Level 3
  • 12 Visual inspection (VT)---Level 1, Level 2, Level 3
  • 13 Thermal imaging testing (TT)---Level 1, Level 2, Level 3
  • 14 Strain testing (ST)---Level 1, Level 2, Level 3
  • 15 New technologies
  • Appendix A (informative) Alternative training hours for advanced radiographic inspection technology
  • Appendix B (informative) Practical reference materials

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1. Structure and Drafting Rules of Standardization Documents" Drafting.

This document is equivalent to ISO /T S25107.2019 "Nondestructive Testing Non-destructive Testing Training Outline". The file type is determined by ISO 's technical specifications.

The standard was adjusted as my country's national standardization guiding technical document.

1 Scope

This document specifies the requirements and recommendations for non-destructive testing (NDT) training programs and aims to coordinate and maintain commonality in the training of non-destructive testing personnel. Standardized documents to meet industrial needs.

This document specifies the minimum requirements for the implementation of effective structured training for non-destructive testing personnel to ensure compliance with the requirements established by third-party certification bodies.

Qualification examinations administered according to recognized standardized documents. In addition to general requirements for non-destructive testing, this document also provides acoustic emission testing, eddy testing Teaching of flow testing, leak detection, magnetic particle testing, penetrant testing, radiographic testing, ultrasonic testing, visual testing, thermal imaging testing and strain testing Outline guide.

For requirements and recommendations for non-destructive testing training institutions, see ISO /T S25108.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

ISO 9712 Non-destructive testing Non-destructive testing personnel qualification and certification (Non-destructive testing-Qualificationand

Note: GB/T 9445-2015 Qualification and certification of non-destructive testing personnel (ISO 9712:2012, IDT)

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Adjustment

A series of operations performed in order to make the marked value given by the measuring system conform to the given value being measured.

Note: Types of adjustment for measurement systems include zero adjustment, offset adjustment, and span adjustment (sometimes called gain adjustment).

4 Summary

4.1 Non-destructive testing training

The training syllabus cannot guarantee that the abilities of all students meet the technical requirements because some students have obtained excellent results in the same course.

It is very common for some students to fail. ISO 9712 stipulates the minimum requirements for candidates with sufficient skills and basic knowledge.

Training requirements. If the candidate does not meet these requirements, the following additional training content should be considered.

a) Level 1, Level 2, Level 3---Mathematics;

b) Level 1, Level 2, Level 3---Materials and workmanship;

c) Level 3---General basic knowledge course applicable to all non-destructive testing methods.

According to the regulations of ISO 9712, the training hours for direct application for Level 2 are the sum of the hours for Level 1 and Level 2, and direct participation in Level 3 training The class hours are the sum of the class hours for Level 1, Level 2 and Level 3.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 96 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 9712

Similar standards

How to Download GB/Z 43414-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
96 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 43414-2023

$1,325.00