Valid

GB/Z 22559.1-2008Gear - Thermal capacity - Part 1: Rating gear drives with thermal equilibrium at 95°Csump temperature (English PDF)

齿轮 热功率 第1部分:油池温度在95℃时齿轮装置的热平衡计算

Preview PDF

This is a limited preview

Buy now to download the full PDF (23 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 22559.1-2008 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 4, 2008

Implementation date

December 4, 2008

Scope

GB/Z 22559.1-2008 is the English-translated version of 齿轮 热功率 第1部分:油池温度在95℃时齿轮装置的热平衡计算.

GB/Z 22559.1-2008 is the first part of a Chinese guidance document on the thermal capacity of gears, identical to ISO/TR 14179-1:2001. Using a heat balance model, it gives a way to rate the thermal power of single-stage and multi-stage gear drives lubricated with mineral oil.

The standard conditions are an ambient temperature of at most 25 °C in a large indoor space and a sump temperature of at most 95 °C, with correction factors for other conditions such as altitude, operating time, ambient air velocity and sump and ambient temperature.

Two routes are offered: Method A by testing and Method B by calculating power losses and heat dissipation. Informative annexes cover mesh and windage losses of bevel gears and mesh losses of worm gears. It was issued on 4 December 2008.

Found what you need?

Document preview — GB/Z 22559.1-2008

National Standard of the People's Republic of China

ICS
21.200
Classification
J 17

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 symbols and units, terms and definitions
  • 3 Criteria for rated thermal power
  • 4 conditions of use
  • 5 determine the rated thermal power method
  • 6 Method A test method
  • 7 Method B Calculation of rated thermal power PT
  • 8 Amendments to non-standard working conditions
  • Appendix A (Informative) Bevel gear meshing power loss and wind resistance power loss
  • Appendix B (Informative) worm gear meshing power loss
  • References

Foreword

GB /Z22559 "gear thermal power" includes the following 2 parts.

--- Part 1. Calculation of heat balance of gears at 95 ° C tank temperature;

--- Part 2. Calculation of thermal carrying capacity. This section GB /Z22559 Part 1.

This section identical with ISO /T R14179-1..2001 "Gear thermal power - Part 1. Gear temperature at 95 °C gear unit Thermal Balance Calculation "(in English). This section is equivalent translation ISO /T R14179-1..2001.

For ease of use, this section made the following editorial changes.

--- According to the Chinese habit of some layout format has been modified;

--- With the decimal point "." Instead of as a decimal point ",";

--- Remove the foreword and foreword of ISO /T R14179-1..2001. Appendices A and B of this section are informative appendices.

1 Scope

This part of GB /Z22559 uses a model for analyzing heat balance to provide a single-stage or multi-stage gear unit lubricated with mineral oil Method of calculating thermal power. Calculation is based on the following standard conditions, the highest ambient temperature is not higher than 25 °C, in a large room, the oil The maximum temperature of the pool is not higher than 95 °C; for other conditions, to be amended.

2 Symbols and units, terms and definitions

GB /Z22559 symbols and units used in this section are listed in Table 1, and use the following terms and definitions.

7 Method B Calculation of rated thermal power PT

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.

Referenced standards

Normative references

GB/Z22559

Similar standards

How to Download GB/Z 22559.1-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
23 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 22559.1-2008

$355.00