GB/T 6567.3-2008Technical drawings - Graphical symbols for piping systems - Piping accessories (English PDF)
技术制图 管路系统的图形符号 管件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6567.3-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 26, 2008
Implementation date
January 1, 2009
Scope
GB/T 6567.3-2008 is the English-translated version of 技术制图 管路系统的图形符号 管件.
GB/T 6567.3-2008 fixes the graphical symbols for the pipe fittings commonly used in piping systems, and clause 1 applies it to the representation of those symbols in piping system drawings.
The foreword places it as the third of the five parts of GB/T 6567, Technical drawings - Graphical symbols for piping systems, alongside the parts on basic principles, pipelines, valves and control components, and the axonometric representation of pipe fitting and valve symbols.
It is a revision of GB/T 6567.3-1986, and the foreword lists the changes: the scope and the normative documents clause were modified and expanded in line with GB/T 1.1, the introductory element Technical drawings was added before Graphical symbols for piping systems because the scope division used by ISO/TC 10 places that series under technical drawings, and the wording of the relevant content was revised, the revision being based on problems manufacturers reported after the 1986 edition came into wide use.
The body is built around a table of names, symbols and descriptions for joint fittings, which opens with the elbow, the tee and the union and goes on to the threaded joint entries.
A note attached to that table explains that the symbols are drawn for threaded connections as an example and that symbols for flanged, socket weld and other connection types can be derived by combining them as prescribed.
Clause 2 cites GB/T 6567.1 for the basic principles of graphical symbols for piping systems and GB/T 4458.4 for dimensioning on mechanical drawings.
The part falls under the national technical committee for technical product documentation standardization and was drafted with the Shaanxi Institute of Standardization and the AVIC First Aircraft Institute among the participating organizations.
It replaces GB/T 6567.3-1986, and the foreword lists GB 140-1959 and GB 141-1959 among the standards previously issued that it supersedes; it was issued on June 26, 2008 and has applied since January 1, 2009.
Found what you need?
Document preview — GB/T 6567.3-2008
National Standard of the People's Republic of China
- ICS
- 01.100.01
- Classification
- J 04
- Replacing
- GB/T 6567.3-1986
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
Foreword
In GB/T 6567 "Technical drawings Graphical symbols for piping systems," the general title package includes the following five parts.
--- GB/T 6567.1-1986 Graphical symbols Technical drawings of the basic principles of piping systems --- GB/T 6567.2-1986 Graphical symbols Technical drawings pipeline piping system Graphical symbols for pipe fittings --- GB/T 6567.3-1986 Technical drawings of pipeline system --- GB/T 6567.4-1986 Graphical symbols Technical drawings of piping systems and valve control components --- Graphic GB/T 6567.5-2003 Graphical symbols Technical drawings pipeline piping systems, fittings and valves symbol axis Measured drawing method This part is GB/T 6567.3-1986 "Graphical symbols for pipe pipeline system," the amendment. This part published in 1986 After manufacturing enterprises have been widely used. This revision is mainly based on some of the problems found in the application of business, combined with the original standard Content compiled. The main modification contents are.
--- According to GB/T 1.1 and the requirements of this section, modify and increase the "scope" and content "Normative documents";
--- According to the International Organization for Standardization ISO /T C10 of the "pipeline system of graphic symbols," the range division, "graphical symbols for piping systems No. "series of standards is a" technical drawings "category, so this revision in the" Graphical symbols for piping systems, "added before" technology mapping "as a Introductory phrase;
--- Also, on this section of the relevant content has been modified text on.
This part of the National Technical product documentation Standardization Technical Committee.
This part of the National Technical product documentation Standardization Technical Committee.
This section is drafted. the machine Productivity Promotion Center, Shaanxi Institute of Standardization, AVIC First Aircraft Institute, Jiangsu Teachers College.
1 Scope
GB/T 6567 provisions of this part of the pipeline system graphic symbols commonly used fittings.
This section applies to pipe graphical symbols in the piping system.
2 Normative references
The following documents contain provisions which, through reference in this part of the GB/T 6567, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 6567.1 Graphical symbols Technical drawings piping systems the basic principles
GB/T 4458.4 Mechanical drawings - Dimensioning
3 Joint
Name Symbol Description
3.1 Elbow (pipe)
3.2 Tee
3.3 Stone
Symbol is a threaded connection for example. Such as Flanged, socket weld connection type and can be Graphic symbols derived press a predetermined combination
3.4 Union
3.5 Outer terminal
3.6 And outside the threaded joint
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 6567.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6567.3-2008 | Technical drawings - Graphical symbols for piping systems - Piping accessories | current edition | Current |
| GB/T 6567.3-1986 | Technical drawings - Graphical symbols for piping systems - Piping accessories | previous edition | Superseded |
This page sells the current edition, GB/T 6567.3-2008. Earlier editions are listed for reference only.
How to Download GB/T 6567.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4458.4-2003 — Mechanical drawings--Dimensioning
GB/T 6567.1-2008 — Technical drawings - Graphical symbols for piping systems - Basic principles
GB/T 6567.2-2008 — Technical drawings - Graphical symbols for piping systems - Piping
Secure payment via Stripe
Payments accepted
GB/T 6567.3-2008
$85.00