GB/T 6480-2015Carbide detachable bit for rock drilling (English PDF)
凿岩用硬质合金钎头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6480-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 11, 2015
Implementation date
June 1, 2016
Scope
GB/T 6480-2015 is the English-translated version of 凿岩用硬质合金钎头.
GB/T 6480-2015 is the Chinese national standard covering carbide detachable bit for rock drilling. It was issued on 11 September 2015 and has been in force since 1 June 2016, replacing GB/T 6480-2002.
The document is under the responsibility of the China Iron and Steel Association. This page is published from the official record of the 2015 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 6480-2015
National Standard of the People's Republic of China
- ICS
- 77.140.60
- Classification
- H 44
- Replacing
- GB/T 6480-2002
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 1.2 Principle
- 1.3 Reagents
- 2 Normative references
- 3.1 General Provisions
- 3.2 Nuclear Safety Criterion
- 4 Designation expression
- 4.1 General
- 4.2 Removal of surface defects
- 4.3 Traffic and Transportation
- 4.4 Working Area
- 5 Calculation of Analysis Results
- 5.2 Main Production Facilities Layout
- 5.3 Auxiliary Facilities Layout
- 5.4 Administration Buildings Area Layout
- 5.5 Outside Construction Layout
- 5.6 Physical Protect System and Entrance Layout
- 6 Precision
- 6.2 Determination of Design Elevation
- 6.3 Step Type Design
- 6.4 Earth (Stone) Work
- 6.5 Water Drainage of Site
- 7 Assessment of results
- 7.2 Underground Pipeline
- 7.3 Overhead Pipeline
- 8 Test report
- 8.2 Transfer Station (Transshipment Wharf)
- 8.3 Railway
- 8.4 Road
- 8.5 Water Transport
- 9.2 Vegetation Arrangement
- 9.3 Tree Species Selection
1 Foreword
GB/T 6480-2015 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 11 September 2015 and has been in force since 1 June 2016.
It replaces the earlier edition GB/T 6480-2002, GB/T 6480-1994.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 6480-2015 falls under ICS 77.140.60, in the field of metallurgy.
This catalogue holds 3,436 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
4 Related standards
Other editions:
GB/T 6480-2026 (later edition)
GB/T 6480-2002 (earlier edition)
GB/T 6480-1994 (earlier edition)
Standards on related subjects:
GB/T 6728-2025 — Cold forming sectional steel for general structure
GB/T 6725-2017 — General requirements of cold forming steel sections
GB/T 6723-2017 — Cold forming open section steel for general structure
GB/T 6481-2016 — Hollow hexagonal drill rods with taperd connection for rock drilling
5 Classification and status
International classification (ICS): 77.140.60
Chinese Standard Classification (CCS): H 44
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 6480
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6480-2015 | Carbide detachable bit for rock drilling | current edition | Current |
| GB/T 6480-2002 | Carbide detachable bit for rock drilling | previous edition | Superseded |
This page sells the current edition, GB/T 6480-2015. Earlier editions are listed for reference only.
How to Download GB/T 6480-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 6480-2015
$165.00