Partners save 15% on every standard

Valid

GB/T 6346.26-2018Fixed capacitors for use in electronic equipment -- Part 26: Sectional specification -- Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (English PDF)

Also coversGBT6346.26-2018

Open the GB/T 6346.26-2018 preview as PDF

Preview — first pages of GB/T 6346.26-2018

This is a limited preview

Buy now to download the full PDF

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

June 7, 2018

Implementation date

January 1, 2019

Scope

GB/T 6346.26-2018 (Fixed capacitors for use in electronic equipment -- Part 26: Sectional specification -- Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte) is available as an English-translated PDF.

GB/T 6346.26-2018 — This part of "Fixed Capacitors for Electronic Equipment" is applicable to conductive polymer solid electrolyte aluminum fixed capacitors. The capacitor is mainly used DC circuits in electronic devices. Note. Solid electrolyte (MnO2) aluminum capacitors use IEC 60384-4 and IEC 60384-4-2. Surface mount conductive polymer solid electrolyte aluminum fixed electric The container adopts GB/T 6346.25-2018 and GB/T 6346.2501-2018.

Document preview — GB/T 6346.26-2018

National Standard of the People's Republic of China

ICS: 31.060.50
Classification: L 11

Issued by: State Administration for Market Regulation, China National Standardization Administration

Foreword
1 General
1.1 Scope
1.2 Purpose
1.3 Normative references
1.4 What should be given in the detailed specification

Foreword

The National Standard for Fixed Capacitors for Electronic Equipment is divided into the following sections.

--- Part 1. General specification (IEC 60384-1.2008);

--- Part 2. Sectional specification metallized polyethylene terephthalate film dielectric DC fixed capacitors (GB/T 7332-2011/

IEC 60384-2.2005);

--- Part 2-1. Blank detail specification Metallized polyethylene terephthalate film dielectric dc fixed capacitors Assessment level

E and EZ (GB/T 7333-2012/IEC 60384-2-1.2005);

--- Part 3. Sectional specification Surface Mount (MnO2) Solid Electrolyte Tantalum Fixed Capacitors (GB/T 6346.3-2015/IEC )

60384-3.2006);

---Part 3-1. Blank Detail Specification Surface Mount (MnO2) Solid Electrolyte/Fixed Capacitors Assessment Level EZ

(GB/T 6346.301-2015/IEC 60384-3-1.2006);

--- Part 4. Sectional specification for aluminium capacitors with solid and non-solid electrolyte (GB/T 5993-2003/IEC 60384-4.1998, number one

Revision No. 1..2000);

---Part 4-1. Blank detail specification Non-solid electrolyte aluminum capacitors Assessment level E (GB/T 5994-2003/IEC

60384-4-1.2000);

--- Part 4-2. Blank detail specification for solid electrolyte (MnO2) aluminium capacitors Assessment level EZ (IEC 60384-4-2.

2007);

--- Part 5. Selection of test methods for fixed mica dielectric capacitors with rated voltage not exceeding 3,000 V

General requirements (GB/T 6261-1998/IEC 60384-5.1993);

--- Part 5-1. Blank detail specification - Fixed mica dielectric dielectric capacitors with a rated voltage not exceeding 3000 V

Selection and general requirements assessment level E (GB/T 6262-1998/IEC 60384-5-1.1993);

--- Part 6. Sectional specification metallized polycarbonate film dielectric DC fixed capacitors (available for certification) (GB/T 14004-

1992/IEC 60384-6.1987);

--- Part 6-1. Blank detail specification Metallized polycarbonate film dielectric dc fixed capacitors Assessment level E (available for certification

Used) (GB/T 14005-1992/IEC 60384-6-1.1987);

--- Part 7. Sectional specification of metal foil type polystyrene film dielectric DC fixed capacitors (GB/T 10185-2012);

--- Part 7-1. Blank detail specification Fixed metal foil type polystyrene film dielectric DC capacitors Assessment level E

(GB/T 10186-2012);

--- Part 8. Subdivision 1 fixed ceramic capacitors (GB/T 5966-2011/IEC 60384-8.2005);

--- Part 8-1. Blank detail specification Fixed capacitors of ceramic dielectric class 1 Assessment level EZ (GB/T 5967-2011/IEC )

60384-8-1.2005);

--- Part 9. Section 2 fixed capacitors of ceramic dielectrics (GB/T 5968-2011/IEC 60384-9.2005);

--- Part 9-1. Blank detail specification Fixed ceramic capacitors of Class 2 Assessment level EZ (GB/T 5969-2011/IEC )

60384-9-1.2005);

--- Part 11. Sectional specification for metal foil type polyethylene terephthalate film dielectric DC fixed capacitors

(GB/T 6346.11-2015/IEC 60384-11.2008);

--- Part 11-1. Blank detail specification for foil-type polyethylene terephthalate film dielectric DC fixed capacitors

Evaluation level EZ (GB/T 6346.1101-2015/IEC 60384-11-1.2008);

--- Part 12. Sectional specification for metal foil type polycarbonate dielectric DC capacitors (IEC 60384-12.1988);

--- Part 12-1. Blank detail specification. Fixed metal foil type polycarbonate film dielectric DC capacitors Assessment level EZ

(IEC 60384-12-1.1988);

--- Part 13. Sectional specification of foil-type polypropylene film dielectric DC fixed capacitors (GB/T 10188-2013/IEC

60384-13.2006);

--- Part 13-1. Blank detail specification Fixed metal foil type polypropylene film dielectric DC capacitors Assessment levels E and EZ

(GB/T 10189-2013/IEC 60384-13-1.2006);

--- Part 14. Sectional specification Fixed capacitors for electromagnetic interference suppression in power supply (GB/T 6346.14-2015/IEC 60384-14.

2005);

--- Part 14-1. Blank detail specification for the suppression of power supply Electromagnetic interference Fixed capacitors for the assessment level D (GB/T 6346.

1401-2015/IEC 60384-14-1.2005);

--- Part 15. Sectional specification for non-solid or solid electrolyte tantalum capacitors (GB/T 7213-2003/IEC 60384-15.1982,

Revision No. 1. 1987, Revision No. 2..1992);

--- Part 15-1. Blank detail specification Non-solid electrolyte foil electrode tantalum capacitors Assessment level E (available for certification)

(GB/T 12794-1991/IEC 60384-15-1.1984);

--- Part 15-2. Blank detail specification Non-solid electrolyte porous anode tantalum capacitors Assessment level E (available for certification)

(GB/T 12795-1991/IEC 60384-15-2.1984);

--- Part 15-3. Blank detail specification for solid electrolyte porous anode tantalum capacitors Assessment level E (available for certification)

(GB/T 7214-2003/IEC 60384-15-3.1992);

--- Part 16. Sectional specification metallized polypropylene film dielectric DC fixed capacitors (GB/T 10190-2012/IEC 60384-

16.2005);

--- Part 16-1. Blank detail specification Fixed metallized polypropylene film dielectric DC capacitors Assessment levels E and EZ

(GB/T 10191-2011/IEC 60384-16-1.2005);

--- Part 17. Sectional specification for metallized polypropylene film dielectric ac and pulse capacitors (GB/T 14579-2013/IEC

60384-17.2005);

--- Part 17-1. Blank detail specification for metallized polypropylene film dielectric ac and pulse-hold capacitors Assessment levels E and EZ

(GB/T 14580-2013/IEC 60384-17-1.2005);

--- Part 18. Sectional specification solid (MnO2) and non-solid electrolyte chip type aluminum fixed capacitors (GB/T 17206-1998/

IEC 60384-18.1993, Revision No. 1..1998);

--- Part 18-1. Blank detail specification Surface Mount Solid (MnO2) Electrolyte Aluminum Fixed Capacitors Assessment Level EZ

(GB/T 17207-2012/IEC 60384-18-1.2007);

--- Part 18-2. Blank detail specification Non-solid electrolyte chip type aluminium electrolytic fixed capacitors Assessment level E

(GB/T 17208-1998/IEC 60384-18-2.1993);

--- Part 19. Sectional specification for surface mount metallized polyethylene terephthalate film dielectric DC fixed capacitors

(GB/T 15448-2013/IEC 60384-19.2005);

--- Part 19-1. Blank Detail Specification Surface Mount Metallized Polyethylene Terephthalate Film Dielectric DC Fixed Capacitors

Assessment level EZ (GB/T 16467-2013/IEC 60384-19-1.2006);

--- Part 21. Sectional specification. Surface mount type 1 multilayer ceramic dielectric capacitors (GB/T 21041-2007/IEC 60384-

21.2004);

---Part 21-1. Blank detail specification Class 1 multilayer ceramic dielectric capacitors for surface mounting Assessment level EZ

(GB/T 21038-2007/IEC 60384-21-1.2004);

--- Part 22. Sectional specification for surface mounting of type 2 multilayer ceramic dielectric capacitors (GB/T 21042-2007/IEC 60384-

22.2004);

--- Part 22-1. Blank detail specification Surface mount multilayer ceramic fixed capacitors of class 2 Assessment level EZ

(GB/T 21040-2007/IEC 60384-22-1.2004);

--- Part 23. Sectional specification for surface mount metallized polyethylene naphthalate film dielectric DC fixed capacitors

(IEC 60384-23.2015);

--- Part 23-1. Blank detail specification Surface mounted metallized polyethylene naphthalate film dielectric DC fixed capacitors

Appraisal level EZ (IEC 60384-23-1.2015);

--- Part 24. Sectional specification for surface mount conductive polymer solid electrolyte tantalum capacitors (IEC 60384-24.2015);

--- Part 24-1. Blank detail specification for surface mount conductive polymer solid electrolyte helium fixed capacitors Assessment level EZ

(IEC 60384-24-1.2006);

--- Part 25. Sectional specification for surface mounting of conductive polymer solid electrolytic aluminum fixed capacitors (GB/T 6346.25-2018/

IEC 60384-25.2015);

--- Part 25-1. Blank detail specification Surface mount conductive polymer solid electrolytic aluminum fixed capacitors Assessment level EZ

(GB/T 6346.2501-2018/IEC 60384-25-1.2006);

26.2010);

---Part 26-1. Blank detail specification for conductive polymer solid electrolytic aluminum fixed capacitors Assessment level EZ

(GB/T 6346.2601-2018/IEC 60384-26-1.2010).

This section is Part 26 of "Fixed Capacitors for Electronic Equipment."

This section was drafted in accordance with the rules given in GB/T 1.1-2009.

This section uses the translation method identical to the use of IEC 60384-26.2010 "Fixed Capacitors for Electronic Equipment Part 26. Sectional Guides

Electropolymer solid electrolyte aluminum fixed capacitor".

The Chinese documents that are consistent with the normatively quoted international documents in this section are as follows.

---GB/T 2423.28-2005 Environmental testing for electric and electronic products Part 2. Test methods Test T. Soldering

(IEC 60068-2-20.1979, IDT)

---GB/T 2693-2001 Fixed capacitors for use in electronic equipment Part 1. Generic specification (IEC 60384-1.1999, IDT)

1 General

1.1 Scope

This part of "Fixed Capacitors for Electronic Equipment" is applicable to conductive polymer solid electrolyte aluminum fixed capacitors. The capacitor is mainly used

DC circuits in electronic devices.

Note. Solid electrolyte (MnO2) aluminum capacitors use IEC 60384-4 and IEC 60384-4-2. Surface mount conductive polymer solid electrolyte aluminum fixed electric

The container adopts GB/T 6346.25-2018 and GB/T 6346.2501-2018.

1.2 Purpose

The purpose of this section is to specify the preferred ratings and characteristics for this type of capacitor and to select the appropriate quality from IEC 60384-1

Assess procedure, test and measurement methods, and give general characteristic requirements. The detailed specifications quoted in this section stipulate the severity of the test and

When required, it should have the same or higher performance level than this section, and does not allow to reduce the performance level.

1.3 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 2421.1-2008 Environmental testing for electrical and electronic products. an overview and guidelines (IEC 60068-1.1988, IDT)

GB/T 2423.22-2012 Environmental testing Part 2. Test methods Test N. Temperature change (IEC 60068-2-14.

2009, IDT)

GB/T 2471-1995 Priority numbers for resistors and capacitors [idtIEC 60063. 1963, Revision No. 1 (1967), No. 2

Revision List (1977)]

1.4 What should be given in the detailed specification

The detailed specifications should be formulated according to the relevant blank detailed specifications.

Detailed specifications should not specify requirements that fall below the general specifications, sub-specifications, or blank detailed specifications. When more stringent requirements are included,

Listed in 1.9 of the detailed specification, and should be noted in the test schedule, for example. with an asterisk.

Note. For the sake of convenience, the contents of 1.4.1 can be expressed in the form of a table.

The following content should be specified in each detailed specification, and the cited values should be selected preferentially from the values given in the corresponding clauses of this section.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 2423.22-2012Environmental testing - Part 2: Test methods - Test N: Change of temperature

GB/T 2421.1-2008 · IEC 60068 · GB/T 2471-1995

How to Buy GB/T 6346.26-2018

1Add to cart. Click the "Buy GB/T 6346.26-2018" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.