Valid

GB/T 5966-2011Fixed capacitors for use in electronic equipment -- Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 (English PDF)

电子设备用固定电容器第8部分：分规范 1类瓷介固定电容器

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/T 5966-2011 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

December 30, 2011

Implementation date

July 1, 2012

Scope

GB/T 5966-2011 is the English-translated version of 电子设备用固定电容器第8部分：分规范 1类瓷介固定电容器.

GB/T 5966-2011 — Ceramic capacitors have fixed to determine the temperature coefficient (porcelain Class 1) This section applies to the use of electronic equipment, including leadless capacitor Device, but does not include surface mount multilayer ceramic capacitors.

1) Electromagnetic interference suppression capacitors are not included in this section, the class includes a capacitor in the IEC 60384-14 "Fixed capacitors for electronic equipment Part 14.

Sectional specification for electromagnetic interference suppression and power network connection fixed capacitor "in.

Found what you need?

Document preview — GB/T 5966-2011

National Standard of the People's Republic of China

ICS: 31.060.20
Classification: L 11
Replacing: GB/T 5966-1996

Issued by: Standardization Administration of China

Introduction
1 General
1.1 Scope
1.2 Objective
1.3 Normative references
1.4 Detail specification shall specify the contents of
1.5 Terms and Definitions
1.6 Flag
2 3 priority ratings and characteristics
2.1 Priority 3 properties
2.2 Priority Rating
3 Quality assessment procedures
3.1 Initial manufacturing stage
3.2 Structurally similar elements
3.3 Certified records of released lots
8 3.4 Qualification approval
3.5 Quality conformance inspection
4 14 test and measurement procedures
4.1 Visual inspection and dimensional inspection
4.2 Electrical Test
4.3 Temperature coefficient alpha and temperature cycling drift capacity
17 4.4 Terminal Strength
4.5 Resistance to soldering heat
4.6 Weldability
4.7 Rapid changes in temperature (eg detailed specifications)
18 4.8 Vibration
18 4.9 Collision
4.10 Shock
4.11 Climatic sequence

Foreword

"Fixed capacitors for use in electronic equipment" series of national standards divided into the following sections.

--- Part 1. Generic specification (GB/T 2693-2001/IEC 60384-1:1999);

--- Part 2. Sectional specification - Fixed metallized polyethylene terephthalate film dielectric dc capacitors (GB/T 7332-2011 /IEC 60384-2:2005);

--- Part 2-1. Blank detail specification - Fixed metallized polyethylene terephthalate film dielectric dc capacitors - Assessment level E and EZ (IEC 60384-2-1:2005);

--- Part 3. Sectional specification for surface mounting MnO2 solid electrolyte capacitors - (IEC 60384-3:2007);

--- Part 3-1. Blank detail specification surface mount MnO2 solid electrolyte tantalum capacitors - Assessment level EZ (IEC 60384-3-1:2007);

--- Part 4. Sectional specification solid and non-solid electrolyte aluminum electrolytic capacitors (GB/T 5993-2003/IEC 60384-4.

1998, No. 1 amendments 2000);

--- Part 4-1. Blank detail specification non-solid electrolyte aluminum electrolytic capacitors - Assessment level EZ (GB/T 5994-2003 /IEC 60384-4:2000);

--- Part 4-2. Blank detail specification solid electrolyte aluminum electrolytic capacitors - Assessment level EZ (IEC 60384-4-2.

2007);

--- Part 6. Sectional specification - Fixed metallized polypropylene film dielectric dc capacitors (IEC 60384-6:2005);

--- Part 6-1. Blank detail specification metallized polypropylene film dielectric dc capacitors - Assessment level E (IEC 60384-6-1:2005);

--- Part 7. Sectional specification metal foil polystyrene film dielectric dc capacitors (GB/T 10185);

--- Part 7-1. Blank detail specification polystyrene film dielectric metal foil dc capacitors - Assessment level E (available confession Card use) (GB/T 10186);

--- Part 8-1. Blank detail specification Fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ (GB/T 5967-2011 /IEC 60384-8-1:2005);

--- Part 9. Sectional specification Fixed capacitors of ceramic dielectric, Class 2 (GB/T 5968-2011/IEC 60384-9:2005);

--- Part 9-1. Blank detail specification Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ (IEC 60384-9-1:2005);

--- Part 11. Sectional specification metal foil polyethylene terephthalate film dielectric dc capacitors (IEC 60384-11:2008);

--- Part 11-1. Blank detail specification metal foil polyethylene terephthalate film dielectric dc capacitors Assessment level EZ (IEC 60384-11-1:2008);

--- Part 12. Sectional specification polycarbonate film dielectric metal foil dc capacitors (IEC 60384-12. 1988);

--- Part 12-1. Blank detail specification polycarbonate film dielectric metal foil dc capacitors - Assessment level E (IEC 60384-12-1. 1988);

--- Part 13. Sectional specification polypropylene film dielectric metal foil dc capacitors (IEC 60384-13:2006);

--- Part 13-1. Blank detail specification polypropylene film dielectric metal foil dc capacitors - Assessment levels E and EZ (IEC 60384-13-1:2006);

--- Part 14. Sectional specification curb the power of electromagnetic interference with a fixed capacitor (GB/T 14472-1998/IEC 60384-14.

1993, No. 1 amendments 1995);

--- Part 14-1. Blank detail specification curb the power of electromagnetic interference capacitors - Assessment level D (GB/T 14473-1998/IEC 60384-14-1:1993);

--- Part 15. Sectional specification non-solid or solid electrolyte tantalum capacitors (GB/T 7213-2003/IEC 60384-15. 1982, no. 1 amendments. 1987, No. 2 amendments 1992);

--- 15-1. Blank detail specification solid electrolyte tantalum capacitor foil electrode - Assessment level E (Applicable for certification) (GB/T 12794-1991/IEC 60384-15-1. 1984);

--- 15-2. Blank detail specification solid electrolyte and porous anode tantalum capacitors - Assessment level E (Applicable for certification) (GB/T 12795-1991/IEC 60384-15-2. 1984);

--- 15-3. Blank detail specification solid electrolyte and porous anode tantalum capacitors - Assessment level E (GB/T 7214-2003/IEC 60384-15-3:1992);

--- Part 16. Sectional specification - Fixed metallized polypropylene film dielectric dc capacitors (IEC 60384-16:2005);

--- Part 16-1. Blank detail specification metallized polypropylene film dielectric dc capacitors - Assessment levels E and EZ (GB/T 10191-2011/IEC 60384-16-1:2005);

--- Part 17. Sectional specification - Fixed metallized polypropylene film dielectric ac and pulse capacitors (IEC 60384-17:2005);

--- Part 17-1. Blank detail specification metallized polypropylene film dielectric ac and pulse capacitors - Assessment level E and EZ (IEC 60384-17-1:2005);

--- Part 18. Sectional specification solid (MnO2) and non-solid electrolyte sheet aluminum fixed capacitors (GB/T 17206-1998 /IEC 60384-18:1993, No. 1 amendments 1998);

--- Part 18-1. Blank detail specification surface mount solid (MnO2) electrolyte aluminum capacitors - Assessment level EZ (IEC 60384-18-1:2007);

--- 18-2. Blank detail specification sheet of non-solid electrolyte aluminum capacitors - Assessment level E (GB/T 17208-1998/IEC 60384-18-2:1993);

--- Part 19. Sectional specification - Fixed metallized polyethylene terephthalate film dielectric surface mount dc capacitors (IEC 60384-19:2006);

--- Part 19-1. Blank detail specification - Fixed metallized polyethylene terephthalate film dielectric surface mount dc capacitors Assessment level E (IEC 60384-19-1:2006);

--- Part 21. Sectional specification Class 1 surface mount multilayer ceramic capacitors fixed (GB/T 21041-2007/IEC 60384-21.

2004);

--- Part 21-1. Blank detail specification Class 1 surface mount multilayer ceramic capacitors - Assessment level EZ (GB/T 21038-2007/IEC 60384-21-1:2004);

--- Part 22. Sectional specification surface mount multilayer ceramic multilayer Class 2 Fixed capacitors (GB/T 21042-2007 /IEC 60384-22:2004);

--- Part 22-1. Blank detail specification Class 2 surface mount multilayer ceramic capacitors - Assessment level EZ (GB/T 21040-2007/IEC 60384-22-1:2004).

This section "Fixed capacitors for use in electronic equipment" Part 8 series of national standards.

According to the rules of this part of GB/T 1.1-2009 and GB/T 20000.2-2009 given draft.

This section uses the translation method is equivalent to using IEC 60384-8:2005 "Fixed capacitors for use in electronic equipment - Part 8. Sectional specification Class 1 Fixed ceramic dielectric capacitors. " Consistency of the correspondence between the specification of international documents and normative references of the following documents.

--- GB/T 2421.1-2008 Environmental testing for electric and electronic products overview and guidance (IEC 60068-1. 1988, IDT).

For ease of use, IEC 60384-8:2005 made some editorial changes.

--- Remove the IEC foreword;

. "" --- With a decimal point instead of a comma as the decimal point;

Footnotes --- table prepared according to national standards requirements were modified.

This part is GB/T 5966-1996 the first revision. This section compared with GB/T 5966-1996, the main changes are as follows.

--- Added leaded multilayer ceramic capacitor requirements;

--- Given new priority values in Table 3, the formula to calculate these priorities specified values;

--- Deleted Assessment level E, an increase of Assessment level EZ.

This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.

This section is under the jurisdiction of the National electronic equipment with a resistor and capacitor Standardization Technical Committee (SAC/TC165).

This section is drafted. a state-run seventh Wuchang.

1 General

1.1 Scope

Ceramic capacitors have fixed to determine the temperature coefficient (porcelain Class 1) This section applies to the use of electronic equipment, including leadless capacitor Device, but does not include surface mount multilayer ceramic capacitors. 1) Electromagnetic interference suppression capacitors are not included in this section, the class includes a capacitor in the IEC 60384-14 "Fixed capacitors for electronic equipment Part 14. Sectional specification for electromagnetic interference suppression and power network connection fixed capacitor "in.

1.2 Purpose

The purpose of this section is to define their priorities in this class capacitor ratings and characteristics, and from GB/T 2693-2001 "electronic equipment Fixed capacitors - Part 1. Generic specification ", select the appropriate quality assessment procedures, test and measurement methods, as well as to give the general characteristics begging. When the detail specification referenced test severities and requirements prescribed in this section, this section shall have the same or a higher level of performance, not allowed to reduce the level of performance.

1.3 Normative References

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 321-2005 priority number and priority number system (ISO 3. 1973, IDT) GB/T 2471-1995 priority coefficient resistors and capacitors (IEC 60063. 1963, IDT) GB/T 2693-2001 Fixed capacitors for use in electronic equipment - Part 1. Generic specification (IEC 60384-1:1999, IDT) IEC 60384-14 Fixed capacitors for use in electronic equipment - Part 14. Sectional specification for electromagnetic interference suppression and power solid-Fi Given capacitor (Fixedcapacitorsforuseinelectronicequipment-Part 14. Sectionalspecification. Fixedca-pacitorsforelectromagneticinterferencesuppressionandconnectiontothesupplymains) IEC 60068-1 Environmental testing for electric and electronic products - Part 1. General (Environmentaltesting-Part 1. General andguidance) IEC 60410. 1973 count inspection sampling plans and procedures (Samplingplansandproceduresforinspectionbyat-tributes)

1.4 Detailed specification content to be specified

Blank detail specification shall be about to develop a detailed specification.

Detail specification shall prescribe a lower total specification, sectional or blank detail specification requirements stipulated. When including more stringent requirements, should Listed in the detailed specification of 1.9, and should be noted in the test schedule, for example, with an asterisk.

Note. For convenience, the contents of 1.4.1 can be represented in tabular form.

1) including IEC 60384-21IDT in (Class 1 ceramic) in.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 321-2005 · ISO 3 · GB/T 2471-1995 · IEC 60063 · GB/T 2693-2001 · IEC 60384 · IEC 60068 · IEC 60410

How to Download GB/T 5966-2011

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.