GB/T 595-2008Marine bronze male thread stop valves (English PDF)
船用外螺纹青铜截止阀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 595-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 30, 2008
Implementation date
February 1, 2009
Scope
GB/T 595-2008 is the English-translated version of 船用外螺纹青铜截止阀.
GB/T 595-2008 is the Chinese standard "Marine bronze male thread stop valves". Its scope clause reads: This standard specifies the classification and labeling, requirements, test methods, inspection rules, marking, package and storage of marine bronze male thread stop valves (hereafter referred to as stop valves).
This standard is applicable to the design, manufacturing and acceptance of stop valve for marine pipeline system. Its clauses include classification and labeling.
Found what you need?
Document preview — GB/T 595-2008
National Standard of the People's Republic of China
- ICS
- 47.020.30
- Classification
- U 52
- Replacing
- GB/T 595-1983
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative References
- 3 Classification and Labeling
- 4 Requirements
- 5 Test Methods
- 6 Inspection Rules
- 7 Package and Storage
1 Scope
This standard specifies the classification and labeling, requirements, test methods, inspection rules, marking, package and storage of marine bronze male thread stop valves (hereafter referred to as stop valves).
This standard is applicable to the design, manufacturing and acceptance of stop valve for marine pipeline system.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 600 General Specifications for Marine Piping Valves and Fittings
GB/T 1176-1987 Specification for Cast Copper Alloys (ISO 1338:1977, NEQ)
GB/T 1184-1996 Geometrical Tolerancing - Geometrical Tolerances for Features without Individual Tolerance Indications (eqv ISO 2768-2:1989)
GB/T 1804-2000 General Tolerances - Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications (eqv ISO 2768-1:1989)
GB/T 1958 Geometrical Product Specifications (GPS) - Geometrical Tolerance - Verification Prescription
GB/T 2059-2000 Strips of Copper and Copper Alloys
GB/T 3032 Marks for Marine Piping Valves and Fittings
GB/T 4423-1992 Copper Bars
CB*56 The Flat Shoulder Threaded Joints of Tube
GB/T 3589-1994 Non-asbestos Gaskets and Fillers for Marine Valves
3 Classification and Labeling
3.1 Type
Stop valves are classified into the following two types:
a) Type A - through-type stop valve;
b) Type B - perpendicular-type stop valve.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 595
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 595-2008 | Marine bronze male thread stop valves | current edition | Current |
| GB/T 595-1983 | Marine bronze male thread stop valves | previous edition | Superseded |
This page sells the current edition, GB/T 595-2008. Earlier editions are listed for reference only.
How to Download GB/T 595-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 595-2008
$95.00