Valid

GB/T 584-2008Marine cast steel flanged stop valves (English PDF)

船用法兰铸钢截止阀

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 584-2008 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 20, 2008

Implementation date

April 1, 2009

Scope

GB/T 584-2008 is the English-translated version of 船用法兰铸钢截止阀.

GB/T 584-2008 is the Chinese standard "Marine cast steel flanged stop valves".

Its scope clause reads: This standard specifies the dimensions and sealing surface of the flange connection according to GB/T 569, GB/T 2501 Marine steel flanged globe valve (hereinafter referred to as Shut-off valve) classification and marking requirements, test methods, inspection rules, packaging and storage.

This standard applies to ships piping systems shutoff valve design, manufacture and acceptance. Its clauses include classification and marking.

Found what you need?

Document preview — GB/T 584-2008

National Standard of the People's Republic of China

ICS
47.020.30
Classification
U 52
Replacing
GB/T 584-1999

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Classification and Marking
  • 3.2 Basic parameters

1 Scope

This standard specifies the dimensions and sealing surface of the flange connection according to GB/T 569, GB/T 2501 Marine steel flanged globe valve (hereinafter referred to as

Shut-off valve) classification and marking requirements, test methods, inspection rules, packaging and storage.

This standard applies to ships piping systems shutoff valve design, manufacture and acceptance.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 569 Marine flange connection dimensions and sealing surface

GB/T 600 marine piping valves General technical requirements

GB/T 699-1999 quality carbon structural steel

GB/T 983-1995 stainless steel welding rod

GB/T 1184-1996 shape and position tolerances without individual tolerance value (eqv ISO 2768-2. 1989)

GB/T 1220-2007 stainless steel rod

GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance tolerance (eqv ISO 2768-1. 1989)

GB/T 1958-2004 Geometrical Product Specifications (GPS) shape and position tolerance testing requirements

GB/T 2501 Marine flange connection dimensions and sealing surface (four into position)

Flag GB/T 3032 Ship pipeline accessories

GB/T 11698 Marine flange length of the structure connecting metal valves (GB/T 11698-2008, ISO 5752. 1982, Metal valvesforuseinflangedpipesystems-Face-to-faceandcenter-to-facedimensions, MOD)

GB/T 12229-2005 General valves carbon steel castings

CB/T 3927 Marine casting wall thickness of the valve member

3 Classification and Marking

Type 3.1

Off valve type specified as follows.

A type --- flange dimensions and sealing surface according to GB/T 569 through-type cut-off valve;

Type B --- flange dimensions and sealing surface of GB/T right-angle cut-off valve 569;

AS type --- flange dimensions and sealing surface according to GB/T 2501 through-type cut-off valve;

BS type --- flange dimensions and sealing surface according to GB/T 2501 of right-angle valve.

3.2 Basic parameters

The basic parameters of shut-off valves are shown in Table 1.

Table 1 Basic parameters of the shut-off valve

Type Nominal pressure PN/MPa Nominal diameter DN/mm Medium

Fresh water, oil, fuel and temperature does not exceed

Over 300 °C of steam […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of GB/T 584

EditionTitleRevisionStatus
GB/T 584-2008Marine cast steel flanged stop valvescurrent editionCurrent
GB/T 584-1999Marine cast steel flanged stop valvesprevious editionSuperseded

This page sells the current edition, GB/T 584-2008. Earlier editions are listed for reference only.

How to Download GB/T 584-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 584-2008

$135.00