GB/T 5838.45-2015Phosphors—Part 4-5: Phosphor for color display tubes (English PDF)
荧光粉 第4-5部分:彩色显示管用荧光粉
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 5838.45-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 15, 2015
Implementation date
January 1, 2016
Scope
GB/T 5838.45-2015 is the English-translated version of 荧光粉 第4-5部分:彩色显示管用荧光粉.
GB/T 5838.45-2015 is the Chinese standard "Phosphors - Part 4-5: Phosphor for color display tubes". Its scope clause reads: This Part specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of Y30-G1, Y30-B1 and Y30-R1 phosphors.
This Part is applicable to phosphors for color display tubes. Its clauses include terms and definitions; requirements; test methods; inspection rules; markings; packaging, transportation and storage.
It was issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on MAY 15, 2015 and took effect on JUNE 1, 2016.
Found what you need?
Document preview — GB/T 5838.45-2015
National Standard of the People's Republic of China
- ICS
- 31.030
- Classification
- L 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope5
- 2 Normative References5
- 3 Terms and Definitions5
- 4 Requirements5
- 5 Test Methods8
- 6 Inspection Rules10
- 7 Markings10
- 8 Packaging, Transportation and Storage10
Foreword
The GB/T 5838 Phosphors series of national standards includes the following parts.
---Part 1: Terminology;
---Part 2: Types;
---Part 3: Test Methods for Properties;
---Part 4-1.Phosphor for Black-white Picture Tubes;
---Part 4-2.Phosphor for Indicator Tubes;
---Part 4-3.Phosphor for Oscilloscope Tubes and Display Tubes;
---Part 4-4.Phosphor for Color Picture Tubes;
---Part 4-5.Phosphor for Color Display Tubes. This Part is Part 4-5 of GB/T 5838.
This Part was drafted in accordance with the rules provided in GB/T 1.1-2009.
This Part serves as a replacement of GB/T 11496.1-1989 Phosphor Y30-G1 for Color Display Tubes, GB/T 11496.2-1989 Phosphor Y30-B1 for Color Display Tubes and GB/T 11496.3-1989 Phosphor Y30-R1 for Color Display Tubes.
In comparison with GB/T 11496.1 ~ 11496.3-1989, this Part has the following main changes.
---The three standards GB/T 11496.1 ~ 11496.3 were integrated into one standard;
---The medium particle is deleted from Chapter 1;
---Chapter 3 - Terms and Definitions is added;
---The test of luminous efficiency is modified into the test of relative brightness (see 4.5 and 5.4; 4.4 of Version 1989);
---The composition, crystallographic form, appearance and luminous color in Chapter 3, and the technical indicators in Chapter 2 of the original standards GB/T 11496.1 ~ 11496.3-1989 are merged into the requirements of Chapter 4 in this Part. In addition, the three phosphors Y30-G1, Y30-B1 and Y30-R1 are integrated;
---The indicator of density is adjusted (see 4.8; 4.8.1 or 4.9.1 of Version 1989);
---"Chrominance coordinates" is modified into "chromaticity coordinates", and the excitation voltage in the test methods is modified (see 5.3; 4.3 of Version 1989); Phosphors - Part 4-5.Phosphor for Color Display Tubes
1 Scope
This Part specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of Y30-G1, Y30-B1 and Y30-R1 phosphors.
This Part is applicable to phosphors for color display tubes.
2 Normative References
The following documents are indispensable to the application of this document. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 191 Packaging - Pictorial Marking for Handling of Goods
GB/T 31418.3-2015 Phosphors - Part 3: Test Methods for Properties
GB/T 5838 Terms for Phosphors
3 Terms and Definitions
The terms and definitions defined in GB/T 5838 are applicable to this document.
4 Requirements
4.1 Composition, Crystallographic Form, Appearance and Luminous Color
The composition, crystallographic form, appearance and luminous color shall comply with the stipulations of Table 1.
4.2 Mechanical Impurities Contain no
mechanical impurities.
4.3 Particle Size
4.3.1 Volume center particle size
The volume center particle size shall satisfy the following requirements.
a) Y30-G1.(6.0 ± 1.0) µm;
b) Y30-B1.(6.0 ± 1.0) µm;
c) Y30-R1.(6.0 ± 1.0) µm.
4.3.2 Logarithmic standard deviation
The logarithmic standard deviation shall satisfy the following requirements.
a) Y30-G1.0.30 ± 0.12;
b) Y30-B1.0.35 ± 0.10;
c) Y30-R1.0.35 ± 0.08.
4.4 Chromaticity Coordinates
The chromaticity coordinates shall satisfy the following requirements.
a) Y30-G1.x = 0.291 ± 0.015; y = 0.624 ± 0.020;
b) Y30-B1.x = 0.148 ± 0.010; y = 0.058 ± 0.010;
c) Y30-R1.x = 0.646 ± 0.010; y = 0.350 ± 0.010.
4.5 Relative Brightness
The relative brightness is not lower than 95% of the standard sample.
4.6 Afterglow Time
Short to medium afterglow.
4.7 Relative Spectral Power Distributions
4.7.1 Indicators
5 Test Methods
5.3 Chromaticity Coordinates
In accordance with the stipulations of Chapter 9 in GB/T 31418.3-2015, carry out the test. For Y30-G1 and Y30-B1, the excitation voltage is 10 kV; for Y30-R1, the excitation voltage is 6 kV. The current density is 1 µA/cm2.
5.4 Relative Brightness
In accordance with the stipulations of Chapter 7 in GB/T 31418.3-2015, carry out the test. For Y30-G1 and Y30-B1, the excitation voltage is 10 kV; for Y30-R1, the excitation voltage is 6 kV. The current density is 1 µA/cm2.
5.5 Afterglow Time
In accordance with the stipulations of Chapter 17 in GB/T 31418.3-2015, carry out the test. The excitation voltage is 20 kV, and the current density is 1 µA/cm2.
5.6 Relative Spectral Power Distribution
In accordance with the stipulations of Chapter 8 in GB/T 31418.3-2015, carry out the test. For Y30-G1 and Y30-B1, the excitation voltage is 10 kV; for Y30-R1, the excitation voltage is 6 kV. The current density is 1 µA/cm2.
5.7 Spectral Reflectance of Y30-B1 and Y30-R1
5.7.1 Main equipment
Double beam spectrophotometer.
5.7.2 Test steps
5.7.2.1 Sample preparation
Respectively put the sample to be tested and the standard magnesium oxide powder into two sample boxes, use a flat glass to press them flat, and use an optical glass sheet to cover them.
5.7.2.2 Test
Respectively place the prepared sample to be tested and the standard magnesium oxide power into the sample window and reference window of the integrating sphere of the double beam spectrophotometer. For Y30-B1 phosphor, test the spectral reflectance at a wavelength of 600 nm; for Y30-R1 phosphor, test the spectral reflectance at a wavelength of 500 nm.
5.8 Density
In accordance with the stipulations of Chapter 5 in GB/T 31418.3-2015, carry out the test.
6 Inspection Rules
6.1 The manufacturer's inspection department shall inspect each batch of products in accordance with the stipulations of 5.1 ~ 5.5. Only products that pass the inspection can be allowed to exit the factory.
6.2 Within three months from the date of receipt, the manufacturer shall randomly take 200 g of sample from each batch of phosphors and conduct a re-inspection in accordance with the stipulations of 5.1 ~ 5.5. If it is disqualified, then, it will be handled through negotiation between the demand-side and the supply-side, and when necessary, arbitration can be conducted by a third party.
6.3 The phosphor products of the same designation and produced from the same raw materials and under the same process conditions, and submitted for inspection at one time are considered to be one batch. Each batch of products shall be no less than 5 kg. Under special circumstances, the batch size shall be determined through negotiation between the demand-side and the supply-side.
7 Markings
A label with the trademark shall be attached to the packaging container of the phosphors, and the label shall include the following contents.
a) Designation of the phosphors;
b) Batch No.;
c) Net mass;
d) Production organization;
e) Production date;
f) Markings that comply with the provisions of GB/T 191 for Avoid Sun Exposure, Keep Away from Radiation and Keep Away from Rain.
8 Packaging, Transportation and Storage
8.1 Packaging
Respectively put 1 kg and 5 kg of phosphors in different packages into double-layer polyethylene plastic bags, tightly seal them, then, put them in clean, sealed, moisture-proof, light-proof and secure containers. […]
8.2 Transportation
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 5838Phosphors -- Part 1: Terminology
GB/T 31418.3-2015
Similar standards
How to Download GB/T 5838.45-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
Secure payment via Stripe
Payments accepted
GB/T 5838.45-2015
$145.00