Valid

GB/T 5195.13-2017Fluorspar - Determination of aluminium content - EDTA titration method (English PDF)

萤石 铝含量的测定 EDTA滴定法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 5195.13-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 7, 2017

Implementation date

June 1, 2018

Scope

GB/T 5195.13-2017 is the English-translated version of 萤石 铝含量的测定 EDTA滴定法.

GB/T 5195.13-2017 is the Chinese standard "Fluorspar - Determination of aluminium content - EDTA titration method". Its scope clause reads: This section GB/T 5195 specifies the method of EDTA determination of aluminum content with ethylenediaminetetraacetic acid (EDTA) titration method.

This section applies to the determination of aluminum content in fluorite. Measurement range (mass fraction) .0.20% ~ 3.00%. Its clauses include principle; reagents and materials.

Found what you need?

Document preview — GB/T 5195.13-2017

National Standard of the People's Republic of China

ICS
73.080
Classification
D 52

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 principle
  • 4 Reagents and materials

1 Scope

This section GB/T 5195 specifies the method of EDTA determination of aluminum content with ethylenediaminetetraacetic acid (EDTA) titration method.

This section applies to the determination of aluminum content in fluorite. Measurement range (mass fraction) .0.20% ~ 3.00%.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 6682 analytical laboratory water specifications and test methods

GB/T 8170 rounded repair rules and limit values of the representation and judgment

GB/T 14506.8 Methods for chemical analysis of silicate rocks Part 8. Determination of titanium dioxide

GB/T 22564 fluorite sampling and sample preparation

3 principle

The sample was hydrofluoric acid - sulfuric acid - perchloric acid decomposition, evaporated to dry with potassium pyrosulfate melt. Hydrochloric acid solution made hydrochloric acid solution, add an excess

EDTA and iron, aluminum, titanium plasma coordination, adjust the pH of about 4.5 to nitrosyl R salt as an indicator, the standard solution of copper sulfate titration

The amount of EDTA, potassium fluoride to replace with aluminum, titanium coordination EDTA, titration with copper sulfate standard solution, measured aluminum, titanium, minus the amount of titanium

Amount, that is, the content of aluminum.

4 Reagents and materials

Unless otherwise stated, only the reagents identified as analytical grade are used in the analysis. The water used shall meet the requirements of the secondary water of GB/T 6682

Claim.

Hydrofluoric acid, rho = 1.19 g/mL.

4.2

perchloric acid, rho = 1.69g/mL.

4.3

Glacial acetic acid, rho = 1.05 g/mL.

4.4

pyrosulfate potassium.

4.5

sulfuric acid solution, 1 1.

4.6

ammonia solution, 1 1.

4.7

hydrochloric acid solution, 1 9.

4.8

potassium fluoride solution, 100g/L.

Weigh 20g potassium fluoride, dissolved in.200mL water.

4.9

Acetic acid-ammonium acetate buffer solution, pH = 4.5.

Weigh 71g ammonium acetate dissolved in 500mL water, add 58.5mL glacial acetic acid (4.3), diluted with water to 1000mL, shake.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 5195.13-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 5195.13-2017

$145.00