Valid

GB/T 5169.25-2026Fire hazard testing for electric and electronic products—Part 25: Smoke obscuration—General guidance (English PDF)

电工电子产品着火危险试验 第25部分:烟模糊 总则

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 5169.25-2026 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Recommended

Issue date

October 30, 2026

Implementation date

May 1, 2027

Scope

GB/T 5169.25-2026 is the English-translated version of 电工电子产品着火危险试验 第25部分:烟模糊 总则.

GB/T 5169.25-2026 is the Chinese national standard "Fire hazard testing for electric and electronic products—Part 25: Smoke obscuration—General guidance". It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on May 1, 2027. It is a current standard and replaces GB/T 5169.25-2018.

Found what you need?

Document preview — GB/T 5169.25-2026

National Standard of the People's Republic of China

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Terms and Definitions

1 Foreword

GB/T 5169.25-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 May 2027.

It replaces the earlier edition GB/T 5169.25-2018, GB/T 5169.25-2008.

It is one of 93 parts of the GB/T 5169 series.

2 Scope Preview

GB/T 5169.25-2026 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 76,457 other GB/T standards.

Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of China

4 Related standards

Other parts of this standard:

GB/T 5169.1-1985 — Fire hazard testing for electric and electronic products--Terminology

GB/T 5169.1-1997 — Fire hazard testing for electric and electronic products. Part 4: Terminology concerning fire tests

GB/T 5169.1-2007 — Fire hazard testing for electric and electronic products - Part 1: Terminology concerning fire tests

GB/T 5169.1-2015 — Fire hazard testing for electric and electronic products - Part 1: Terminology concerning fire tests

GB/T 5169.1-2025 — Fire hazard testing for electric and electronic products - Part 1: Terminology concerning fire tests

GB/T 5169.2-1985 — Fire hazard testing for electric and electronic products--Guidance for the preparation of requirements and test specification for assessing fire hazard--General guidance

GB/T 5169.2-2002 — General guidelines for electric and electronic products - Fire hazard testing - Part 2: Fire hazard assessment guide

GB/T 5169.2-2013 — Fire hazard testing for electric and electronic products - Part 2: Guidance for assessing the fire hazard - General guidelines

GB/T 5169.2-2021 — Fire hazard testing for electric and electronic products - Part 2: Guidance for assessing the fire hazard - General guidelines

GB/T 5169.3-1985 — Fire hazard testing for electric and electronic products--Guidance for the preparation of requirements and test specifications for assessing fire hazard of electronic components

GB/T 5169.3-2005 — Fire hazard testing for electric and electronic products - Part 3: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electronic compone

GB/T 5169.5-1985 — Fire hazard testing for electric and electronic products--Test method of needle-flame

GB/T 5169.5-1997 — Fire hazard testing for electric and electronic products. Part 2: Test methods. Section 2: Needle-flame test

GB/T 5169.5-2008 — Fire hazard testing for electric and electronic products -- Part 5: Test flames -- Needle test method -- Apparatus, confirmatory arrangement and guidance

GB/T 5169.5-2020 — Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance

GB/T 5169.6-1985 — Fire hazard testing for electric and electronic products--Test method of bad connection with heater

GB/T 5169.7-1985 — Fire hazard testing for electric and electronic products--Test method of bunsen type flame

GB/T 5169.7-2001 — Fire hazard testing for electric and electronic products -- Test methods for diffusion and premixed flame test methods

GB/T 5169.8-1985 — Fire hazard testing for electric and electronic products--Examples of fire hazard assessment procedures and interpretation of results--Combustion characteristics and survey of test methods for their determination

GB/T 5169.9-1993 — Fire hazard testing for electric and electronic products. Part 9: Guidance for assessing the fire hazard. Use of preselection testing procedures

GB/T 5169.9-2006 — Fire hazard testing for electric and electronic products - Part 9: Guidelines for assessing the fire hazard - Use of preselection testing procedures

GB/T 5169.9-2013 — Fire hazard testing for electric and electronic products - Part 9: Guidance for assessing the fire hazard - Preselection testing procedures - General guidelines

GB/T 5169.9-2021 — Fire hazard testing for electric and electronic products - Part 9: Guidance for assessing the fire hazard - Preselection testing procedures - General guidelines

GB/T 5169.10-1997 — Fire hazard testing for electric and electronic products. Test methods. Glow-wire test methods--General

GB/T 5169.10-2006 — Fire hazard testing for electric and electronic products - Part 10: Glow/hot-wire based test methods - Glow-wire apparatus and common test procedure

GB/T 5169.10-2017 — Fire hazard testing for electric and electronic products -- Part 10: Glowing/hot-wire based test methods -- Glow-wire apparatus and common test procedure

GB/T 5169.10-2026 — Fire hazard testing for electric and electronic products—Part 10:Glowing/hot-wire based test methods—Glow-wire apparatus and common test procedure

GB/T 5169.11-1997 — Fire hazard testing for electric and electronic products. Test methods. Glow-wire end-product test and guidance

GB/T 5169.11-2006 — Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products

GB/T 5169.11-2017 — Fire hazard testing for electric and electronic products -- Part 11: Glowing/hot-wire based test methods -- Glow-wire flammability test method for end-products (GWEPT)

GB/T 5169.11-2026 — Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)

GB/T 5169.12-1999 — Fire hazard testing for electric and electronic products Test methods Glow-wire flammability test on materials

GB/T 5169.12-2006 — Electric and electronic products - Fire hazard testing - Part 12: Glowing / hot-wire based test methods material glow-wire flammability test method

GB/T 5169.12-2013 — Fire hazard testing for electric and electronic products - Part 12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials

GB/T 5169.12-2024 — Fire hazard testing for electric and electronic products—Part 12: Glowing/hot-wire based test methods—Glow-wire flammability index (GWFI) test method for materials

GB/T 5169.13-1999 — Fire hazard testing for electric and electronic products-Test methods-Glow-wire ignitability test on materials

GB/T 5169.13-2006 — Electric and electronic products - Fire hazard testing - Part 13: Glowing / hot-wire based test methods materials glow-wire ignitability test method

GB/T 5169.13-2013 — Fire hazard testing for electric and electronic product - Part 13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

GB/T 5169.13-2024 — Fire hazard testing for electric and electronic products - Part 13: Glowing/hot-wire based test methods - Glowing-wire ignition temperature (GWIT) test method for materials

GB/T 5169.14-2001 — Electric and electronic products - Fire hazard testing method 1kW nominal pre-mixed test flame and guidance

GB/T 5169.14-2007 — Fire hazard testing for electric and electronic products - Part 14: Test flames. 1kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement

GB/T 5169.14-2017 — Fire hazard testing for electric and electronic products -- Part 14: Test flames--1 kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement and guidance

GB/T 5169.15-2008 — Fire hazard testing for electric and electronic products - Part 15: Test flames. 500W flames - Apparatus and confirmative test methods

GB/T 5169.15-2015 — Fire hazard testing for electric and electronic products - Part 15: Test flames - 500 W flames - Apparatus and confirmational test methods

GB/T 5169.16-2002 — Electric and electronic products - Fire hazard testing - Part 16: 50W horizontal and vertical flame test methods

GB/T 5169.16-2008 — Fire hazard testing for electric and electronic products - Part 16: Test flames. 50W horizontal and vertical flame test methods

GB/T 5169.16-2017 — Fire hazard testing for electric and electronic products -- Part 16: Test flames--50 W horizontal and vertical flame test methods

GB/T 5169.17-2002 — Fire hazard testing for electric and electronic products - Part 17: 500W flame test methods

GB/T 5169.17-2008 — Fire hazard testing for electric and electronic products - Part 17: Test flames. 500W flame test methods

GB/T 5169.17-2017 — Fire hazard testing for electric and electronic products -- Part 17: Test flames--500 W flame test method

GB/T 5169.18-2005 — Fire hazard testing for electric and electronic products - Part 18: General Provisions of the electric and electronic products to minimize the fire risk of poisoning guide

GB/T 5169.18-2013 — Fire hazard testing for electric and electronic products -- Part 18: Toxicity of fire effluent -- General guidance

GB/T 5169.19-2006 — Fire hazard testing for electric and electronic products - Part 19: Abnormal heat - Mould stress relief distortion test

GB/T 5169.19-2022 — Fire hazard testing for electric and electronic products - Part 19: Abnormal heat - Mould stress relief distortion test

GB/T 5169.20-2006 — Fire hazard testing for electric and electronic products - Part 20: Surface spread of flame - Summary and relevance of test methods

GB/T 5169.20-2013 — Fire hazard testing for electric and electronic products - Part 20: Surface spread of flame - Summary and relevance of test methods

GB/T 5169.20-2021 — Fire hazard testing for electric and electronic products - Part 20: Surface spread of flame. Summary and relevance of test methods

GB/T 5169.21-2006 — Fire hazard testing for electric and electronic products - Part 21: Abnormal heat - Ball pressure test

GB/T 5169.21-2017 — Fire hazard testing for electric and electronic products -- Part 21: Abnormal heat -- Ball pressure test method

GB/T 5169.22-2008 — Fire hazard testing for electric and electronic products - Part 22: Test flames. 50W flames - Apparatus and confirmative test methods

GB/T 5169.22-2015 — Fire hazard testing for electric and electronic products -- Part 22: Test flames. 50 W flame -- Apparatus and confirmation test method

GB/T 5169.23-2008 — Fire hazard testing for electric and electronic products - Part 23: Test flames-500W vertical flame test method for tubular polymeric materials

GB/T 5169.23-2024 — Fire hazard testing for electric and electronic products - Part 23: Test flames - 500W vertical flame test method for tubular polymeric materials

GB/T 5169.24-2008 — Fire hazard testing for electric and electronic products - Part 24: Guidance for assessing the fire hazard - Insulating liquids

GB/T 5169.24-2018 — Fire hazard testing for electric and electronic products -- Part 24: Guidance for assessing the fire hazard -- Insulating liquids

GB/T 5169.26-2008 — Fire hazard testing for electric and electronic products - Part 26: Smoke obscuration - Summary and relevance of test methods

GB/T 5169.26-2018 — Fire hazard testing for electric and electronic products -- Part 26: Smoke obscuration -- Summary and relevance of test methods

GB/T 5169.26-2026 — Fire hazard testing for electric and electronic products - Part 26: Smoke obscuration - Summary and relevance of test methods

GB/T 5169.27-2008 — Fire hazard testing for electric and electronic products - Part 27: Smoke obscuration - Small-scale static test - Description of the apparatus

GB/T 5169.28-2008 — Fire hazard testing for electric and electronic products -- Part 28: Smoke obscuration -- Small-scale static test -- Materials

GB/T 5169.29-2008 — Fire hazard testing for electric and electronic products - Part 29: Heat release - General guidance

GB/T 5169.29-2020 — Fire hazard test for electric and electronic products - Part 29: Heat release General rules

GB/T 5169.30-2008 — Fire hazard testing for electric and electronic products - Part 30: Heat release - Summary and relevance of test methods

GB/T 5169.30-2020 — Fire hazard test for electric and electronic products - Part 30: Heat release. Summary and correlation of test methods

GB/T 5169.31-2008 — Fire hazard testing for electric and electronic products - Part 31: Surface spread of flame - General guidance

GB/T 5169.31-2022 — Fire hazard testing for electric and electronic products - Part 31: Surface spread of flame - General guidance

GB/T 5169.33-2023 — Fire hazard testing for electric and electronic products - Part 33: Guidance for assessing the fire hazard - Ignitability - General guidance

GB/T 5169.34-2023 — Fire hazard testing for electric and electronic products - Part 34: Guidance for assessing the fire hazard - Ignitability - Summary and relevance of test methods

GB/T 5169.35-2015 — Fire hazard testing for electric and electronic products - Part 35: Corrosion damage effects of fire effluent - General guidance

GB/T 5169.35-2025 — Fire hazard testing for electric and electronic products - Part 35: Corrosion damage effects of fire effluent - General guidance

GB/T 5169.36-2015 — Fire hazard testing for electric and electronic products - Part 36: Corrosion damage effects of fire effluent - Summary and relevance of test methods

GB/T 5169.36-2025 — Fire hazard testing for electric and electronic products - Part 36: Corrosion damage effects of fire effluent - Summary and relevance of test methods

GB/T 5169.38-2014 — Fire hazard testing for electric and electronic products - Part 38: Toxicity of fire effluent - Summary and relevance of test methods

GB/T 5169.39-2015 — Fire hazard testing for electric and electronic products -- Part 39: Toxicity of fire effluent -- Use and interpretation of test results

GB/T 5169.40-2015 — Fire hazard testing for electric and electronic products - Part 40: Toxicity of fire effluent - Estimation of toxic potency - Apparatus and test method

GB/T 5169.41-2015 — Fire hazard testing for electric and electronic products - Part 41: Toxicity of fire effluent - Estimation of toxic potency - Calculation and interpretation of test results

GB/T 5169.44-2013 — Fire hazard testing for electric and electronic products - Part 44: Guidance for assessing the fire hazard - Fire hazard assessment

GB/T 5169.44-2022 — Fire hazard testing for electric and electronic products - Part 44: Guidance for assessing the fire hazard - Fire hazard assessment

GB/T 5169.45-2019 — Fire hazard testing for electric and electronic products -- Part 45: Guidance for assessing the fire hazard -- Fire safety engineering

GB/T 5169.46-2020 — Fire hazard testing for electric and electronic products - Part 46: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source

GB/T 5169.47-2022 — Fire hazard testing for electric and electronic products - Part 47: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products

GB/T 5169.49-2024 — Fire hazard testing for electric and electronic products - Part 49: Arc ignition test method for materials

Other editions:

GB/T 5169.25-2018 (earlier edition)

GB/T 5169.25-2008 (earlier edition)

5 Classification and status

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Editions of GB/T 5169.25

EditionTitleRevisionStatus
GB/T 5169.25-2026Fire hazard testing for electric and electronic products—Part 25: Smoke obscuration—General guidance—Valid from 2027-05-01
GB/T 5169.25-2018Fire hazard testing for electric and electronic products - Part 25: Smoke obscuration - General guidance—Valid until 2027-05-01
GB/T 5169.25-2008Fire hazard testing for electric and electronic products - Part 25: Smoke obscuration - General guidance—Obsolete

This page sells the current edition, GB/T 5169.25-2026. Earlier editions are listed for reference only.

How to Download GB/T 5169.25-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 5169.25-2026

$255.00