GB/T 50430-2017Code for quality management of engineering construction enterprises (English PDF)
工程建设施工企业质量管理规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 50430-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 4, 2017
Implementation date
May 4, 2017
Scope
GB/T 50430-2017 is the English-translated version of 工程建设施工企业质量管理规范.
GB/T 50430-2017 is the Chinese standard "Code for quality management of engineering construction enterprises". Issued on 2017-05-04.
Found what you need?
Document preview — GB/T 50430-2017
Contents
- 1 General
- 2 Terms
- 3 Basic requirements for quality management
- 3.1 General provisions
- 3.2 Quality policy and quality objectives
- 3.3 Planning and establishment of quality management system
- 3.4 Implementation and improvement of quality management system
- 3.5 Document management
- 4 Organization and responsibilities
- 4.1 General provisions
- 4.2 Organization
- 4.3 Responsibilities and authorities
- 5 Human resource management
- 5.1 General provisions
- 5.2 Human resource allocation
- 5.3 Training
- 6 Construction machinery management
- 6.1 General requirements
- 6.2 Construction machinery allocation
- 6.3 Construction machinery use
- 7 Bidding and contract management
- 7.1 General provisions
- 7.2 Bidding and signing
- 7.3 Contract management
- 8 Building materials, structural parts and equipment management
- 8.1 General provisions
- 8.2 Procurement of building materials, construction parts and equipment
- 8.3 Acceptance of building materials, structural parts and equipment
- 8.4 On-site management of building materials, structural parts and equipment
- 8.5 Building materials, construction parts and equipment provided by the Employer
- 9 Subcontract management
- 9.1 General requirements
- 9.2 Subcontractor selection and subcontract
- 9.3 Control of subcontract project implementation process
1 Foreword
GB/T 50430-2017 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 4 May 2017.
It replaces the earlier edition GB/T 50430-2007.
According to the requirements of "Notice on Printing 'Formulation and Revision Plan for Engineering Construction Standards and Codes in 2013'" (JIANBIAO [2013] No. 6) of Ministry of Housing and Urban-Rural Development (MOHURD), the drafting group has revised this code through conducting extensive investigation and study, carefully summarizing practical experiences, referring to relevant foreign advanced standards and widely soliciting for opinions.
This code comprises of: 1.General Provisions; 2.Terms; 3.Basic Requirements; 4.Organizations and Responsibilities; 5.Human Resource Management; 6.Tender and Contract Management; 7.Construction Machinery and Facilities Management; 8.Construction Materials, Components and Equipment Management; 9.Subcontract Management; 10.Project Quality Management; 11.Project Quality Inspection and Acceptance; 12.Quality Management Inspection, Analysis, Evaluation and Improvement.
The main contents revised in this code are as follows: 1.some terms are added and adjusted; 2.name and structure of some chapters are adjusted, Chapter 12 and Chapter 13 from the first are integrated into one chapter; 3.the inharmonic content was deleted; 4.detail construction drawing design is definitely incorporated into engineering design category; 5.ISO 9001 is supplemented: the newly-added content of "Quality Management Systems - Requirements" standard; 6.suitability and operability of specified requirements are strengthen.
This code is in the charge of Ministry of Housing and Urban-Rural Development. And the specific technical content is under the explanation of China Construction Industry Association. During the process of implementing this specification, the relevant opinions and advices can be posted or passed on to China Construction Industry Association(Address: Kowloon Business Center Block A 7 floor,No.48 Zhongguancun South Street Haidian District,Beijing,100081).
2 Scope Preview
GB/T 50430-2017 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 75,626 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages (approximate)
4 Related standards
Other editions:
GB/T 50430-2007 (earlier edition)
5 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 50430-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 50430-2017
$465.00