GB/T 48343-2026Welding procedure qualification of girth welds of corrosion resistant alloy clad or lined steel pipeline (English PDF)
耐蚀合金复合管道环焊缝焊接工艺评定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 48343-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 28, 2026
Implementation date
April 1, 2027
Scope
GB/T 48343-2026 is the English-translated version of 耐蚀合金复合管道环焊缝焊接工艺评定.
GB/T 48343-2026 is the Chinese standard "Welding procedure qualification of girth welds of corrosion resistant alloy clad or lined steel pipeline". Issued on 2026-09-28, in force from 2027-04-01.
Found what you need?
Document preview — GB/T 48343-2026
Contents
- 1 Scope
- 2 Normative references
- 3 Terms, definitions, symbols, codes and abbreviations
- 3.1 Terms and definitions
- 3.2 Symbols and codes
- 3.3 Abbreviations
- 4 Basic provisions
- 4.1 Assessment procedure
- 4.2 Materials
- 4.3 Equipment
- 4.4 Welding and personnel
- 5 Assessment rules
- 5.1 General requirements
- 5.2 Pre-welding procedure specification
- 5.3 Change of essential variables
- 6 Inspection and assessment
- 6.1 General requirements
- 6.2 Non-destructive testing
- 6.3 Destructive testing
- 7 Assessment report
1 Foreword
GB/T 48343-2026 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 28 September 2026 and has been in force since 1 April 2027.
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This document specifies the rules, inspection and test methods, and assessment report for the welding procedure qualification of girth welds of corrosion-resistant alloy clad pipes with internal cladding or pipe end cladding. This document is applicable to the welding procedure qualification for girth welds of corrosion-resistant alloy clad pipes with internal cladding or pipe end cladding used in oil and gas field surface engineering, using shielded metal arc welding, tungsten inert gas welding, gas metal arc welding, or a combination thereof.
GB/T 48343-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 75,626 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages (approximate)
4 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download GB/T 48343-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 48343-2026
$480.00