GB/T 48130-2026Geometrical product specifications (GPS) - Design and metrological characteristics of rotary axis form-measuring instruments (English PDF)
产品几何技术规范（GPS） 回转型形状测量仪的设计和计量特性
Also coversGB/T48130-2026 + GBT48130-2026
This is a limited preview
Buy now to download the full PDF (47 pages)
Need quotation for your management?
Get a formal quotation for GB/T 48130-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 28, 2026
Implementation date
January 1, 2027
Scope
GB/T 48130-2026 is the English-translated version of 产品几何技术规范（GPS） 回转型形状测量仪的设计和计量特性.
This standard belongs to the geometrical product specifications (GPS) family and addresses the design and metrological characteristics of rotary axis form-measuring instruments, which are used to measure the form of round or rotationally symmetric parts. It is aimed at instrument manufacturers, calibration and metrology laboratories, and quality engineers who buy, verify or compare form-measuring equipment in precision manufacturing.
It adopts an international standard. It was issued on 28 September 2026 and takes effect on 1 January 2027. As a GB/T document it is recommended, and it will usually be applied through procurement terms or internal quality systems. Roundness and cylindricity measurements underpin quality control for bearings, shafts, engine parts and precision components, so a shared description of what these instruments are and how their characteristics are stated helps buyers compare offers on equal terms. Metrology teams that need their equipment descriptions and performance statements to follow the current Chinese standard system can use it as a reference.
Found what you need?
Document preview — GB/T 48130-2026
National Standard of the People's Republic of China
- ICS
- 17.040.30;17.040.40
- Classification
- J04
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
GB/T 48130-2026 is a recommended national standard (GB/T) of the People's Republic of China, issued on 28 September 2026 by the State Administration for Market Regulation and the Standardization Administration of China, with effect from 1 January 2027.
The document adopts an international standard (ISO or IEC).
It is under the responsibility of the Standardization Administration of China.
Classification: ICS 17.040.30;17.040.40; CCS J04.
1 Scope
This standard belongs to the geometrical product specifications (GPS) family and addresses the design and metrological characteristics of rotary axis form-measuring instruments, which are used to measure the form of round or rotationally symmetric parts. It is aimed at instrument manufacturers, calibration and metrology laboratories, and quality engineers who buy, verify or compare form-measuring equipment in precision manufacturing.
It adopts an international standard. It was issued on 28 September 2026 and takes effect on 1 January 2027. As a GB/T document it is recommended, and it will usually be applied through procurement terms or internal quality systems. Roundness and cylindricity measurements underpin quality control for bearings, shafts, engine parts and precision components, so a shared description of what these instruments are and how their characteristics are stated helps buyers compare offers on equal terms. Metrology teams that need their equipment descriptions and performance statements to follow the current Chinese standard system can use it as a reference.
Remaining clauses in the full document
- 2 Normative references
- 3 Terms and definitions
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 47 pages — is available in the English PDF.
How to Download GB/T 48130-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 48130-2026
$755.00