Valid

GB/T 48088-2026Ships and marine technology - Wire rope lifting platform for inspection (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (7 pages)

Need quotation for your management?

Get a formal quotation for GB/T 48088-2026 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Recommended

Issue date

August 28, 2026

Implementation date

December 1, 2026

Scope

GB/T 48088-2026 (Ships and marine technology - Wire rope lifting platform for inspection) is available as an English-translated PDF.

GB/T 48088-2026 is a national standard for wire rope lifting platforms used to inspect ships and marine structures. These platforms give an alternative means of access for close-up inspection of the structure beneath decks.

It covers classification by driver type and rated working load, design requirements, test methods, marking and accompanying documents.

Design requirements address safety, the lifting device, the fastening device and the fall arrest device, while the tests include prototype type testing, no-load operation, operation under rated working load and braking performance.

The foreword states that it is equivalent to ISO 9557:2024. Issued on 28 August 2026 and applicable from 1 December 2026, it replaces no earlier standard.

Found what you need?

Document preview — GB/T 48088-2026

National Standard of the People's Republic of China

ICS
47.020.50
Classification
U 21

Issued by: State Administration for Market Regulation

Contents

  • Preface
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Classification
  • 4.1 Driver Type
  • 4.2 Rated working load
  • 5 Design Requirements
  • 5.1 General Requirements
  • 5.2 Safety Requirements
  • 5.4 Lifting Device
  • 5.5 Fastening Device
  • 5.6 Fall arrestor
  • 6 Test Methods
  • 6.1 Prototype type testing
  • 6.2 No-load operation
  • 6.3 Operation under rated working load
  • 6.4 Braking performance test
  • 7 Mark
  • 8 Random Files
  • Reference

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents".

This document is equivalent to ISO 9557:2024 "Wire rope lifting platforms for ship and marine technical inspection".

1 Scope

This document specifies the classification, design requirements, and test methods for inspection wire rope lifting platforms (hereinafter referred to as "platforms").

It serves as an alternative access point for close-up inspection of the sub-deck structures of ships and marine structures.

2 Normative references

This document has no normative references.

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Test channel alternative means of access

A movable inspection passage is provided for the inspection and thickness measurement of the hull structure in areas inaccessible by permanent access.

Note: IMO resolution MSC 158(78) describes areas that cannot be accessed through permanent inspection channels.

3.2 Rated working load

The platform's maximum payload.

3.3 Main platform structure

A device enclosed by a guardrail to accommodate operators.

3.5 Fastening device

Devices fixed to the structure below the deck for use with suspended platforms and fall arrestors.

3.6 Fall arrest device

The device connecting the operator's safety harness automatically locks to prevent the operator from falling when the platform's descent speed exceeds a set speed. The device.

Note: See Figure 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.

How to Download GB/T 48088-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
7 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 48088-2026

$195.00