Valid

GB/T 48041-2026Glycol-copolymerized polyethylene terephthalate (PETG) film — General technical requirements (English PDF)

多二元醇共聚聚对苯二甲酸乙二醇酯(PETG)薄膜 通用技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 48041-2026 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 30, 2026

Implementation date

February 1, 2027

Scope

GB/T 48041-2026 is the English-translated version of 多二元醇共聚聚对苯二甲酸乙二醇酯(PETG)薄膜 通用技术要求.

GB/T 48041-2026 is the Chinese standard "Glycol-copolymerized polyethylene terephthalate (PETG) film — General technical requirements". Its scope clause reads: This document specifies the terms and definitions, classification, requirements, and testing procedures for polydiol copolymerized polyethylene terephthalate (PETG) films.

Rules, marking, packaging, transportation, and storage are described, along with the corresponding test methods. This document applies to the co-production of terephthalic acid with 1,2-ethylene glycol and other diols (1,4-cyclohexanediol, neopentyl glycol, etc.).

The resin prepared from poly(ethylene glycol) (in which 1,2-ethylene glycol accounts for more than 50% of the total diols) is used as the main raw material, with necessary additives added.

Production, inspection and sales of films prepared by extrusion molding (hereinafter referred to as "PETG film"). Its clauses include terms and definitions; classification; requirements.

Found what you need?

Document preview — GB/T 48041-2026

National Standard of the People's Republic of China

ICS
83.140.10
Classification
G 33

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4.Classification

1 Scope

This document specifies the terms and definitions, classification, requirements, and testing procedures for polydiol copolymerized polyethylene terephthalate (PETG) films.

Rules, marking, packaging, transportation, and storage are described, along with the corresponding test methods.

This document applies to the co-production of terephthalic acid with 1,2-ethylene glycol and other diols (1,4-cyclohexanediol, neopentyl glycol, etc.).

The resin prepared from poly(ethylene glycol) (in which 1,2-ethylene glycol accounts for more than 50% of the total diols) is used as the main raw material, with necessary additives added.

Production, inspection and sales of films prepared by extrusion molding (hereinafter referred to as "PETG film").

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

GB/T 1040.3 Determination of tensile properties of plastics - Part 3.Test conditions for films and sheets

GB/T 2410 Determination of light transmittance and haze of transparent plastics

GB/T 2918 Standard Environment for Conditioning and Testing of Plastic Specimens

GB/T 6672 Mechanical Measurement Method for Determination of Thickness of Plastic Films and Sheets

GB/T 10006 Determination of the coefficient of friction of plastic films and sheets

GB/T 14216 Determination of wetting tension of plastic films and sheets

3 Terms and Definitions

This document does not contain any terms or definitions that need to be defined.

4 Classification

4.1

PETG films are classified into transparent films and non-transparent films according to their light transmittance.

4.2

PETG films are classified into two-dimensional low-shrinkage films, two-dimensional high-shrinkage films, and one-dimensional high-shrinkage films according to their shrinkage properties.

4.3

Transparent bidirectional low-shrinkage films are classified into frosted films and glossy films according to their haze.

5 Requirements

5.1 Appearance

5.1.1

The film should be free from obvious cracks, fringe, scratches, bubbles, crystal points, wrinkles, damage, impurities, contamination, or other defects that may affect its performance.

defect.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download GB/T 48041-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 48041-2026

$195.00