GB/T 47968-2026General technical specification for grid-forming converters (English PDF)
构网型变流器通用技术规范
This is a limited preview
Buy now to download the full PDF (26 pages)
Need quotation for your management?
Get a formal quotation for GB/T 47968-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 30, 2026
Implementation date
November 1, 2026
Scope
GB/T 47968-2026 is the English-translated version of 构网型变流器通用技术规范.
GB/T 47968-2026 is the Chinese standard "General technical specification for grid-forming converters". Its scope clause reads: Requirements for labeling, packaging, transportation, and storage are specified, along with corresponding test methods.
This document applies to grid-type energy storage converters, grid-type photovoltaic inverters, and grid-type full-power inverters with AC port voltages of 35kV and below.
The design, manufacture, testing, inspection, and operation of grid-connected converters for high-speed wind turbine units shall be carried out with reference to other types of grid-connected converters. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 47968-2026
National Standard of the People's Republic of China
- ICS
- 27.180
- Classification
- F 19
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1.Scope
- 2 Normative References
- 3.Terms and Definitions
- 4.Normal working environment conditions
- 5 Appearance and protection rating
- 6.Technical Requirements
- 7.Test Methods
- 8.Simulation Model and Parameters
- 9.Marking, Packaging, Transport and Storage
- Appendix B (Normative) Method for Calculating the Initial Value of Transient Current Increment over Time
- Appendix C (Normative) Broadband Impedance Measurement Method
- References
1 Scope
Requirements for labeling, packaging, transportation, and storage are specified, along with corresponding test methods.
This document applies to grid-type energy storage converters, grid-type photovoltaic inverters, and grid-type full-power inverters with AC port voltages of 35kV and below.
The design, manufacture, testing, inspection, and operation of grid-connected converters for high-speed wind turbine units shall be carried out with reference to other types of grid-connected converters.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 4208 Degrees of protection provided by enclosures (IP code)
GB/T 12325 Power Quality - Supply Voltage Deviation
GB/T 14549 Power Quality - Harmonics in Public Power Grids
GB/T 15543 Power Quality - Three-phase Voltage Imbalance
GB/T 15945 Power Quality - Frequency Deviation of Power Systems
GB/T 20626.1 Electrical and electronic products for high-altitude environments under special conditions - Part 1.General technical requirements
GB/T 20840.2 Instrument Transformers - Part 2.Supplementary Technical Requirements for Current Transformers
GB/T 20840.3 Instrument Transformers - Part 3.Supplementary Technical Requirements for Electromagnetic Voltage Transformers
GB/T 24337 Power Quality - Inter-grid Harmonics
GB/T 25387.1 Full-power converters for wind turbine generator sets - Part 1.Technical conditions
GB/T 25387.2 Wind turbine generator set full power converter - Part 2.Test methods
GB 26861 Electrical Safety Work Regulations - High Voltage Testing Laboratory Section
GB/T 34133 Technical Specification for Testing Energy Storage Converters
GB/T 37408 Technical Requirements for Grid-Connected Photovoltaic Inverters
GB/T 37409 Technical Specification for Testing Photovoltaic Grid-Connected Inverters
3 Terms and Definitions
The terms and definitions defined in GB/T 34120, GB/T 37408, and GB/T 25387.1, as well as the following terms and definitions, apply to this document.
3.1 Grid-forming control
Control technology for power electronic devices to autonomously construct and maintain internal potential amplitude and frequency, operating with voltage source characteristics.
3.2 Grid-following control
Control technology for power electronic devices that operate with current source characteristics, following the grid voltage and frequency.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.
How to Download GB/T 47968-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 47968-2026
$465.00