Valid

GB/T 47822-2026Test methods for heat flux measurement in hypersonic wind tunnels (English PDF)

高超声速风洞测热试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (28 pages)

Need quotation for your management?

Get a formal quotation for GB/T 47822-2026 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 2, 2026

Implementation date

February 1, 2027

Scope

GB/T 47822-2026 is the English-translated version of 高超声速风洞测热试验方法.

GB/T 47822-2026 is the Chinese national standard covering how heat flux is measured on a model in a hypersonic tunnel — the thin-film and coaxial gauges, the phosphor and infrared techniques, the run conditions and the data reduction that yields a heating rate.

Aerodynamic heating is the constraint that shapes a hypersonic vehicle, and this is how it is measured on the ground. First edition. It was issued on 2 July 2026 and takes effect on 1 February 2027, as a first edition.

This page is published from the official record of the 2026 edition; the clause text of a standard this recent is not yet in circulation, and the figures, limits and tables it contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — GB/T 47822-2026

National Standard of the People's Republic of China

ICS
49.020
Classification
V 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Symbols
  • 5 General rules
  • 6 Heat-transfer sensor test in an impulse wind tunnel
  • 7 Phosphor thermography test in an impulse wind tunnel
  • 8 Heat-transfer sensor test in a blowdown wind tunnel
  • 9 Infrared thermography test in a blowdown wind tunnel
  • 10 Evaluation and reporting of the test results
  • Annex A (informative) Working principle, fabrication and calibration method of thin-film resistance thermometers
  • Annex B (informative) Working principle, fabrication and calibration method of coaxial thermocouples
  • Annex C (informative) Test report

3 Terms and definitions

4 Symbols

5 General rules

6 Heat-transfer sensor test in an impulse wind tunnel

7 Phosphor thermography test in an impulse wind tunnel

8 Heat-transfer sensor test in a blowdown wind tunnel

9 Infrared thermography test in a blowdown wind tunnel

10 Evaluation and reporting of the test results

Foreword

This document was issued on 2 July 2026 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and takes effect on 1 February 2027.

It is the first edition of this standard.

The document is under the responsibility of the Academy of Military Sciences of the PLA.

Classification: ICS 49.020, CCS V 04.

3 Classification and status

GB/T 47822-2026 is classified under ICS 49.020, in the field of aircraft and space vehicle engineering. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS V 04. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.

How to Download GB/T 47822-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
28 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 47822-2026

$495.00