GB/T 47784-2026Textiles - Testing and evaluation of fabric touch sensation - Rotor blade method (English PDF)
纺织品 织物触感检测与评价 旋翼刮刀法
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 47784-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 2, 2026
Implementation date
February 1, 2027
Scope
GB/T 47784-2026 is the English-translated version of 纺织品 织物触感检测与评价 旋翼刮刀法.
GB/T 47784-2026 is the Chinese standard "Textiles - Testing and evaluation of fabric touch sensation - Rotor blade method". Its scope clause reads: This document describes the method for testing and evaluating fabric touch sensation during contact with human skin using the rotor blade method.
This document is applicable to fabrics with a smooth surface and uniform structure. Non-uniform regular fabrics such as jacquard, lace and openwork fabrics may refer to this document for implementation. Its clauses include terms and definitions; principle; symbols; apparatus.
Found what you need?
Document preview — GB/T 47784-2026
National Standard of the People's Republic of China
- ICS
- 59.080.30
- Classification
- W 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword i
- 1 Scope
- 2 Normative reference documents
- 3 Terms and definitions
- 4 Principle
- 5 Symbols
- 6 Instruments
- 7 Conditioning and testing environment
- 8 Preparation of specimens
- 9 Test procedures
- 10 Calculation of results
- 11 Evaluation method
- 12 Test report
- Annex A (Informative) Subjective evaluation method for fabric touch sensation
- Annex B (Informative) Modeling procedure and example for fabric touch sensation evaluation
- References
1 Scope
This document describes the method for testing and evaluating fabric touch sensation during contact with human skin using the rotor blade method.
This document is applicable to fabrics with a smooth surface and uniform structure. Non-uniform regular fabrics such as jacquard, lace and openwork fabrics may refer to this document for implementation.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 3820, Determination of thickness of textiles and textile products
GB/T 4669, Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area
GB/T 6529, Textiles - Standard atmospheres for conditioning and testing
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 fabric touch sensation
The subjective impression or perception of fabric characteristics obtained through direct contact between the fabric and human skin.
[Source: FZ/T 01166-2022, 3.1]
3.2 rotor blade
A functional mechanical device consisting of eight thin blades arranged vertically at 45° intervals, driven by a stepper motor to apply load to the fabric and rotate at a constant speed.
3.3 bulk
The volume per unit mass of a fabric under a specified light pressure.
[Source: GB/T 24442.1-2009, 3.9]
3.4 roughness
The property of microscopic surface unevenness of a fabric, characterized by the power intensity at the maximum vibration frequency in the vertical direction when the rotor blade applies a vertical load to the fabric surface and rotates.
3.5 softness
The property of a fabric's resistance to deformation, characterized by the power intensity at the maximum vibration frequency in the horizontal direction when the rotor blade applies a vertical load to the fabric surface and rotates.
3.6 in-plane stiffness
The unit load deformation produced after a certain pressure is applied to the fabric in the vertical direction.
3.7 plastic deformation
The residual deformation produced when a certain pressure is applied to the fabric in the vertical direction and then released back to the initial pressure value.
3.8 deformation hysteresis
The internal friction and energy dissipation caused by the deformation response lagging behind the stress change when the fabric is released from a specific vertical stress to the initial stress state.
4 Principle
Under specified test environmental conditions, the mass and thickness of the specimen are measured and its bulk is calculated. The specimen is placed on the test element in the test groove, and the rotor blade is made to act vertically on the specimen with a specific initial load and rotate at a constant speed. The load is then increased to the set value and released back to the initial load to complete the measurement process. The relevant physical properties such as roughness, softness, in-plane stiffness, plastic deformation and deformation hysteresis on both sides of the specimen are measured. The obtained data are substituted into the hand evaluation model to obtain the subjective hand indicator value of the fabric, thereby achieving the evaluation of the contact sensation between human skin and the fabric.
5 Symbols
The following symbols are applicable to this document.
B - Fabric bulk, in cm³/g
D - Fabric displacement, in µm
E - Power intensity, dimensionless
F - Vibration frequency, in Hz
F - Fabric pressure, in mN
H - Fabric deformation hysteresis, in J
P - Fabric plastic deformation, in µm
R - Fabric surface roughness, dimensionless
S - Fabric surface softness, dimensionless
T - Fabric in-plane stiffness, in mm/N
6 Apparatus
6.1 Structure of the fabric touch sensation testing instrument
A fabric touch sensation testing instrument (see Figure 1) mainly consists of a main spindle, a liftable test head, an isolation cover, a test groove, a clamping ring, a signal receiver, a temperature and humidity sensor, etc. Under the control of a computer, the test head moves downward to act on the specimen on the test element. The computer processes and analyses the data collected by the sensors to obtain objective touch sensation indicators.
6.2 Fabric touch sensation testing instrument
Receiver: Equipped with two independent signal receivers at the bottom and top, respectively reading vibration signals in the vertical and horizontal directions within a frequency range of 0 Hz to 24 000 Hz, with a frequency measurement accuracy of ±1 Hz.
Rotor blade: Made of high-strength polyvinyl chloride, with dimensions of (1 ± 0.01) mm × (20 ± 0.01) mm × (28 ± 0.01) mm, rotating speed of 2 r/s, and maximum linear speed of 340 mm/s at the blade edge. The blade load pressure range on the fabric is 0 mN to 15 000 mN, with an accuracy of ±1 mN.
Clamping ring: A ring-shaped device used to clamp the specimen, made of metal with an inner rubber lip. The inner diameter is 90 mm, and the outer diameter is 115 mm.
Temperature and humidity sensor: Temperature sensor measurement range -40 °C to +100 °C, accuracy ±0.5 °C; relative humidity sensor measurement range 0 % to 100 %, accuracy ±1 %.
Built-in electronic balance: Range 0 g to 1 000.0 g, accuracy ±0.1 g. The load of the rotor blade on the specimen is measured by the balance, with a power supply voltage of 12 V/1 A DC.
Plastic film: Made of PP material, with a diameter of at least 110 mm and a thickness of 0.05 mm.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
How to Download GB/T 47784-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 47784-2026
$285.00