Valid

GB/T 46774-2025Metallic materials — Test method for dynamic fracture toughness at high strain rates (English PDF)

金属材料 高应变速率动态断裂韧度试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (30 pages)

Need quotation for your management?

Get a formal quotation for GB/T 46774-2025 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 2, 2025

Implementation date

July 1, 2026

Scope

GB/T 46774-2025 is the English-translated version of 金属材料 高应变速率动态断裂韧度试验方法.

GB/T 46774-2025 is the Chinese national standard covering measuring fracture toughness when the load arrives in microseconds — the instrumented impact or Hopkinson bar loading, the inertial oscillations that corrupt the early signal, and the validity criteria that decide whether the number means anything.

Crashworthiness and blast design need dynamic toughness, and quasi-static values are not conservative for it. First edition, under the China Iron and Steel Association.

It was issued on 2 December 2025 and has been in force since 1 July 2026, as a first edition. The document is under the responsibility of the China Iron and Steel Association.

This page is published from the official record of the 2025 edition; the clause text of a standard this recent is not yet in circulation, and the figures, limits and tables it contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — GB/T 46774-2025

National Standard of the People's Republic of China

ICS
77.040.10
Classification
H 22

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Symbols and explanations
  • 5 Principle
  • 6 Test specimens
  • 7 Test equipment
  • 8 Test procedure
  • 9 Rounding of the test results
  • 10 Test report
  • Annex A (informative)
  • Annex B (informative)
  • Annex C (informative)
  • Annex D (informative)
  • References

3 Terms and definitions

4 Symbols and explanations

5 Principle

6 Test specimens

7 Test equipment

8 Test procedure

9 Rounding of the test results

10 Test report

Foreword

This document was issued on 2 December 2025 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and has been in force since 1 July 2026.

It is the first edition of this standard.

The document is under the responsibility of the China Iron and Steel Association.

Classification: ICS 77.040.10, CCS H 22.

3 Classification and status

GB/T 46774-2025 is classified under ICS 77.040.10, in the field of metallurgy. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS H 22. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.

The document is under the responsibility of the China Iron and Steel Association, which is the body that maintains it and that will answer a formal question about its interpretation.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.

How to Download GB/T 46774-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
30 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 46774-2025

$455.00