Valid

GB/T 4654-2008The general technical specifications for non-metallic basic body infrared heater (English PDF)

非金属基体红外辐射加热器通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 4654-2008 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 30, 2008

Implementation date

April 1, 2009

Scope

GB/T 4654-2008 is the English-translated version of 非金属基体红外辐射加热器通用技术条件.

GB/T 4654-2008 is the Chinese standard "The general technical specifications for non-metallic basic body infrared heater".

Its scope clause reads: This standard specifies a non-metallic matrix of infrared radiant heaters of the type specifications, technical requirements, test methods, inspection rules, marks, use Brochures, packaging, transport and storage and so on.

This standard applies to silicon carbide, zircon sand, quartz glass, glass, ceramics, zirconia black, black magnetic, vanadium and titanium black porcelain, semiconductor fever Sheet, carbon crystal heating panels, carbon fiber, polyester film and other non-metallic materials for the radiation matrix alloy resistance wire, carbon fiber resistance wire, resistive film, A variety of low-temperature conductivity ceramics and other materials for the electric heating element, the temperature and high-temperature electric infrared radiant heaters (hereinafter referred to as the heater).

Heater as a energy-saving products, mainly used in industrial, agricultural, medical, building heating, transportation and other areas of heating and drying provided Saddled. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 4654-2008

National Standard of the People's Republic of China

ICS: 25.180.10
Classification: K 61
Replacing: GB/T 4654-1984

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 type structure and specifications and the basic parameters
5 Technical requirements
7 inspection rules
8 signs, packaging, transportation and storage

1 Scope

This standard specifies a non-metallic matrix of infrared radiant heaters of the type specifications, technical requirements, test methods, inspection rules, marks, use

Brochures, packaging, transport and storage and so on.

This standard applies to silicon carbide, zircon sand, quartz glass, glass, ceramics, zirconia black, black magnetic, vanadium and titanium black porcelain, semiconductor fever

Sheet, carbon crystal heating panels, carbon fiber, polyester film and other non-metallic materials for the radiation matrix alloy resistance wire, carbon fiber resistance wire, resistive film,

A variety of low-temperature conductivity ceramics and other materials for the electric heating element, the temperature and high-temperature electric infrared radiant heaters (hereinafter referred to as the heater).

Heater as a energy-saving products, mainly used in industrial, agricultural, medical, building heating, transportation and other areas of heating and drying provided

Saddled.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 2900.23-2008 Electrotechnical terminology industrial electric equipment (IEC 60050-841.2004, IDT)

Test methods GB/T 10066.12-2006 electric installations - Part 12. Infrared heating device

GB/T 7287-2008 Test Method for Infrared radiant heaters (IEC 60137Ed.6.0, MOD)

3 Terms and Definitions

GB/T 2900.23-2008, GB/T 10066.12-2006 and GB/T 7287-2008 and established the following terms and definitions

Apply to this standard.

3.1

Will be converted to heat energy of the heat conductive material, the heat source for the heater.

3.2

Connected with the heating element, the power supply for the heater, the heater and the heater is connected with a conductive metal parts.

3.3

The ability to use a strong infrared radiation itself, the thermal energy of the heat generating element is efficiently converted to infrared radiation energy, and the heat generator strut

Member support role.

3.4

Radiating heater on electric power per unit area, in units of W/cm2.

3.5

Heater of the following circumstances shall be deemed to damage.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 37752.6-2025|GB/T 10067.37-2024|GB/T 37752.5-2024|GB/T 10067.101-2023|GB/T 10067.417-2023|GB/T 10067.6-2023

Editions of GB/T 4654

Edition	Title	Revision	Status
GB/T 4654-2008	The general technical specifications for non-metallic basic body infrared heater	current edition	Current
GB/T 4654-1984	The general technical specifications for non-metallic basic body infrared heater	previous edition	Superseded

This page sells the current edition, GB/T 4654-2008. Earlier editions are listed for reference only.

How to Download GB/T 4654-2008

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.