GB/T 46094-2025Leisure accommodation vehicles — Safety signs and information symbols (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents". Drafting.

Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.

This document was proposed by the Ministry of Industry and Information Technology of the People's Republic of China.

This document is under the jurisdiction of the National Automotive Standardization Technical Committee (SAC/TC114).

This document was drafted by: Hebei Lanzhong Special Vehicle Manufacturing Co., Ltd., China Automotive Technology and Research Center Co., Ltd., and SAIC Datongfang.

Car Technology Co., Ltd., Xiangyang Da'an Automobile Testing Center Co., Ltd., Chongqing Changan Automobile Co., Ltd., China Automotive Technology and Research Center (CATARC) (Wuhan) Co., Ltd., Liuzhou Wuling Automobile Industry Co., Ltd., Yutong Bus Co., Ltd., and China Automotive Technology and Research Center (Tianjin) Co., Ltd.

Limited Liability Company, Luoyang Lingyu Langchen Automobile Co., Ltd., Highway Research Institute of the Ministry of Transport, Rongcheng Kangpais New Energy Vehicle Co., Ltd.

Company, Shanghai Motor Vehicle Inspection and Certification Technology Research Center Co., Ltd., Shandong Rongye RV Manufacturing Service Co., Ltd., Changchun Automobile Inspection Center Limited Liability Company, Jiangsu Sanqiao Intelligent Technology Co., Ltd., Disheng (Changzhou) Vehicle Technology Co., Ltd., Hubei Hanxin Special Vehicle Manufacturing Equipment Co., Ltd.

Daimler (China) Commercial Vehicles Investment Co., Ltd.

The main drafters of this document are: Guo Pengbo, Li Weijing, Zhang Yankun, Li Yunwei, Dong Qianghua, Jia Yange, Zheng Jun, Zhang Long, Zhang Hongwei, and Huang Haojie.

Zhang Jianli, Shu Xuefei, Luo Zhi, Guo Ruiling, Zhu Huiming, Zong Chengqiang, Zhang Yingnan, Jing Guangzhi, Zhou Yan, Wang Weicheng, Xiao Heping, Li Leigang, Li Yongwei Shi Yi.

Safety signs and information symbols for recreational vehicles

1 Scope

This document specifies the requirements for safety signs and information symbols for the living areas and special equipment of recreational vehicles.

This document applies to the design and use of safety signs and information symbols for recreational vehicle living areas and special equipment.

2 Normative references

GB/T 2893.4

GB/T 22550

3 Terms and Definitions

The terms and definitions defined in GB/T 22550 and the following terms and definitions apply to this document.

4 General Requirements

4.1 Safety signs for the living area and special equipment of recreational vehicles shall be used in combination with supplementary signs and shall comply with the provisions of Table 1.Supplementary The sign should consist of the type of safety sign and the information provided. The background color of the safety sign type should be the same as that of the safety sign.

4.2 The living area and special facilities of recreational vehicles shall be equipped with the safety signs specified in 5.2 and comply with the requirements of Table 2.The living area of recreational vehicles...

If the area and special equipment are equipped with the safety signs specified in 5.3, they shall comply with the provisions of Table 3.

4.3 If the living area and special equipment of recreational vehicles use the information symbols specified in Chapter 6, they shall comply with the provisions of Table 4.

4.4 The color and chromaticity of safety signs shall conform to the provisions of GB/T 2893.4.The color and chromaticity used in supplementary signs shall be consistent with those of safety signs.

The characters must be identical, and the font height should not be less than 6mm.

4.5 When information symbols are used as graphic symbols for functional indication signs, such as indicating the operating status of a special device, red, a safety color, should not be used.

And yellow. If the device is illuminated to indicate whether it is operating, green is appropriate to indicate normal operation, and green to indicate malfunction or shutdown.

Orange is the preferred color for indicating status; if using luminous and non-luminous methods to indicate device status, luminous indicates the device is on or running, and non-luminous indicates the device is not.

Shut down or stop the machine.