GB/T 45951-2025General procedures for implementing permanent exhibition of science and technology museum (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document was proposed by the China Association for Science and Technology.

This document is under the jurisdiction of the National Technical Committee for Standardization of Science Popularization Services (SAC/TC568).

This document was drafted by: Quanzhou Science and Technology Association of Fujian Province, Quanzhou Science and Technology Museum, Fujian Provincial Institute of Standardization, China Natural Science Museum Society, China Science and Technology Museum, Heilongjiang Science and Technology Museum, Shanxi Science and Technology Museum, Hefei Science and Technology Museum, Xiamen Science and Technology Museum Co., Ltd., Fujian University of Technology, Jiangsu Science Dream Innovation Technology Co., Ltd., Shanghai Fudan Shangke Multimedia Co., Ltd., Ningbo Guo International Investment Consulting Co., Ltd. and Hefei Panshi Intelligent Technology Co., Ltd.

The main drafters of this document are: Wu Baozhong, Ma Xuhong, Chen Jianzhao, Wang Jiafeng, Chen Lihui, Xiao Dani, Chu Jiangbo, Li Tingfen, Wen Fang, Tang Gang, De Xiaolong, Lu Jianhong, Luo Jifeng, Yu Hongping, Wang Zhimin, Chen Jing, Ma Chao, Fan Yanan, Li Ruiting, Sun Xiaojun, Wei Fei, Li Jia, Li Youbao, Li Chen, Qi Jinpeng, Sun Feng, Zhao Kai, Liu Tianjin, and Bao Kexue.

General procedures for implementing permanent exhibitions at science and technology museums

1 Scope

This document establishes the general process for the implementation of permanent exhibitions in science and technology museums, and stipulates the concept design, scheme design, technical design, production and debugging, exhibition Specific requirements for trial operation, exhibition acceptance and archive management.

This document is applicable to the implementation of permanent exhibitions in science and technology museums, and can be used as a reference for other exhibitions in science and technology museums or exhibitions in other science popularization venues.

2 Normative references

GB/T 44315-2024

3 Terms and Definitions

The following terms and definitions apply to this document.

4 General Process

4.1 The general process of implementing permanent exhibitions in science and technology museums includes concept design, scheme design, technical design, production and commissioning, exhibition trial operation, exhibition verification, etc.

The specific implementation process of the collection and file management link is shown in Figure 1.

4.2 In the general process of implementing permanent exhibitions, the results of the demonstration are either passed or failed; failure includes termination of design and redesign.

Design and redesign should be based on the demonstration opinions, and the results of this link should be adjusted before submitting the results demonstration again.