GB/T 45299-2025Dried dill (English PDF)
干莳萝
This is a limited preview
Buy now to download the full PDF (6 pages)
Need quotation for your management?
Get a formal quotation for GB/T 45299-2025 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
February 28, 2025
Implementation date
September 1, 2025
Scope
GB/T 45299-2025 is the English-translated version of 干莳萝.
GB/T 45299-2025 — This document specifies the product description, quality requirements, and packaging, labeling, storage and transportation requirements for dried dill in whole, chopped or powdered form.
The sampling method and inspection method are described. This document applies to the product processing, production, circulation and trade of dried dill.
Found what you need?
Document preview — GB/T 45299-2025
National Standard of the People's Republic of China
- ICS
- 67.220.10
- Classification
- B 36
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Requirements
- 4.1 Taste and smell
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.
This document modifies ISO 21803:2019 Specification for Dried Dill.
Compared with ISO 21803:2019, this document has the following structural adjustments.
--7.3 corresponds to Appendix A in ISO 21803:2019.
The technical differences between this document and ISO 21803:2019 and their reasons are as follows.
-- ISO 927 is replaced by GB/T 12729.5 as a normative reference (see 4.3 and 4.4), GB 5009.3, GB 5009.4 and GB/T 30385 replaced ISO 939, ISO 928 and ISO 930, ISO 6571 (see 4.7) respectively.
GB/T 12729.2 and GB/T 12729.3, which are normative references, replace ISO 948 and ISO 2825 (see Chapter 5) respectively to apply in response to my country's technical conditions, increase operability;
--The limit requirements for "impurities" (see 4.4, 4.4 of ISO 21803:2019) have been changed to meet my country's trade requirements;
-- Changed the standardization documents cited in the test method, and changed the units of moisture, total ash, and acid-insoluble ash (see Table 1,
Table 1 of ISO 21803:2019) to adapt to my country's technical documents;
--The content requirements of "total ash" (see 4.7, 4.7 of ISO 21803:2019) have been changed to comply with the technical document requirements of my country;
-- Changed the "Marking" requirement and deleted the "Shelf Life" (see 7.2, 7.2 of ISO 21803:2019) to meet the requirements of this product.
The actual need for the logo;
-- Changed the relevant description of "storage and transportation" (see 7.3.3, A.3 of ISO 21803:2019) to meet the storage and transportation requirements of this product.
The actual demand for loss.
The following editorial changes were made to this document.
--To coordinate with the existing standards, the name of the standard is changed to "Dried Dill";
--Changed the description of the chapter "Scope" and deleted the description of the appendix in "Scope";
-- Changed the wording of the chapter "Terms and Definitions";
--Change the title of clause 4.7 of ISO 21803:2019 from "Chemical requirements" to "Physical and chemical indicators";
--Change the title of Chapter 7 in ISO 21803:2019, "Packaging and marking", to "Packaging, marking, storage and transport".
1 Scope
This document specifies the product description, quality requirements, and packaging, labeling, storage and transportation requirements for dried dill in whole, chopped or powdered form.
The sampling method and inspection method are described.
This document applies to the product processing, production, circulation and trade of dried dill.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document.
GB 5009.3 National Food Safety Standard Determination of Water Content in Food GB 5009.4 National Food Safety Standard Determination of Ash Content in Food GB/T 12729.2 Sampling methods for spices and condiments GB/T 12729.3 Preparation of powder samples for analysis of spices and condiments (GB/T 12729.3-2020, ISO 2825.
1981, MOD)
GB/T 12729.5 Determination of foreign matter content in spices and condiments (GB/T 12729.5-2020, ISO 927:1982, MOD) GB/T 30385 Spices and condiments - Determination of volatile oil content (GB/T 30385-2013, ISO 6571:2008, IDT)
3 Terms and definitions
The following terms and definitions apply to this document.
ISO and IEC maintain terminology databases used for standardization at the following addresses.
Dried whole, crushed or ground leaves of a single species of dill (Anethum graveoens L.).
foreign matter
All substances that are not spices or herbs tested and that are visible to the naked eye or detected after magnification up to 10 times.
NOTE. Macroscopic foreign matter may be of animal (e.g., animal excreta, insects, products contaminated by insects) or non-animal (e.g., stems, gravel, straw, visible mold) origin.
Impurities extraneous matter all substances that are visible to the naked eye or detected after magnification up to 10 times and originate from the spice or herb itself.
Note. Macroscopic debris may be plant waste, yellow or brown leaves, broken stems, and buds are considered as debris.
4 Requirements
4.1 Taste and smell
Dried dill should have a strong, characteristic taste and smell and be free of earthy or rotten vegetable and foreign odors.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 5009.3National food safety standard - Determination of Moisture Content in Foods
- GB 5009.4National food safety standard - Determination of Ash in Foods
- GB/T 12729.2Spices and condiments - Sampling
- GB/T 12729.3Spices and condiments - Preparation of a ground sample for analysis
- GB/T 12729.3-2020Spices and condiments - Preparation of a ground sample for analysis
- GB/T 12729.5Spices and condiments - Determination of extraneous matter content
ISO 2825 · ISO 927 · ISO 6571
How to Download GB/T 45299-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5009.3-2016 — National food safety standard - Determination of Moisture Content in Foods
GB 5009.300-2025 — National food safety standard - Determination of L-carnitine in foods
GB 5009.301-2025 — National food safety standard - Determination of osmotic pressure in food
Secure payment via Stripe
Payments accepted
GB/T 45299-2025
$135.00