Partners save 15% on every standard

Valid

GB/T 44756-2024Terminology of flat glass processing machinery (English PDF)

平板玻璃加工机械术语

Open the GB/T 44756-2024 preview as PDF

Preview — first pages of GB/T 44756-2024 (full document: 15 pages)

This is a limited preview

Buy now to download the full PDF (15 pages)

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 26, 2024

Implementation date

May 1, 2025

Scope

GB/T 44756-2024 is the English-translated version of 平板玻璃加工机械术语.

GB/T 44756-2024 is the Chinese national standard covering the vocabulary of the machines that work flat glass after the float line — the cutting machines named by how they cut, with the cutter wheel and wire saw, the laser, the abrasive water jet and the flame, the breaking device that separates the sheet along the score, and the grinding and polishing machines, so that a contract for deep-processing plant is read the same way by buyer and builder. First edition, under the China Building Materials Federation. In force from 1 May 2025. Issued on 26 October 2024, it has been in force since 1 May 2025.

Document preview — GB/T 44756-2024

National Standard of the People's Republic of China

ICS: 91.110
Classification: Q 93

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Glass cutting machinery
3.1 glass cutting machine
3.2
3.3
3.4
3.5
3.6
3.7 Glass breaking machine glassseveringdevice
4 Glass grinding and polishing machinery
4.1 glass grinding machine glassgrindingmachine

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document is proposed by China Building Materials Federation.

This document is under the jurisdiction of the National Technical Committee for Standardization of Building Materials and Equipment (SAC/TC465).

This document was drafted by: Foshan Shunde District Quality and Technical Supervision Standards and Coding Institute, Bengbu Kaisheng Engineering Technology Co., Ltd., Guangdong Province Machinery Research Institute Co., Ltd., Shenzhen Jixiangyun Technology Co., Ltd., Luoyang Institute of Technology, China Building Materials Machinery Industry Association, Changsha Baitong New Materials Technology Co., Ltd., Guangdong Lifeng Intelligent Technology Co., Ltd., Bengbu Chaoyang Glass Machinery Co., Ltd., Foshan Chancheng District Quality Technology Association, Tianjin Sinoma Engineering Research Center Co., Ltd.

The main drafters of this document are: Li Junsheng, Xu Dichun, Ye Kun, Wang Yumin, Li Yingqi, Liu Jie, Hao Xiangguo, Huang Zaifu, Li Bin, Xia Penghua, Chen Haibing, Guo Guichao, Wang Song, Yang Chuxin, Zhao Jing, Xu Wenhua, Zhao Hongxun, Zhang Jiazhu, Zhang Keli, Fu Weixia, Guo Tianyu, and Cai Zhongjie.

Flat glass processing machinery terminology

1 Scope

This document defines the terminology used for machinery for the further processing of flat glass.

This document applies to the interpretation of terms related to flat glass deep processing machinery.

2 Normative references

This document has no normative references.

3 Glass cutting machinery

3.1 glass cutting machine

Equipment that uses cutting tools, lasers, high-pressure water, flames and other processing methods to cut flat glass.

3.2

A glass cutting machine (3.1) that uses cutting tools such as a cutter wheel and a wire saw to cut flat glass.

3.3

Glass cutting machine (3.1) using laser energy for cutting.

3.4

A glass cutting machine (3.1) uses a mixture of high-pressure water and abrasives to shoot at the surface of flat glass at high speed to cut the glass.

3.5

A glass cutting machine (3.1) that uses a heat source to heat and cut glass.

3.6

Glass cutting machine (3.1) that meets the requirements for cutting ultra-thin glass products.

3.7 Glass breaking machine glassseveringdevice

A device that separates flat glass from the cut.

4 Glass grinding and polishing machinery

4.1 glass grinding machine glassgrindingmachine

A device that uses grinding to remove excess material from flat glass blanks to achieve plane accuracy, dimensional accuracy or surface roughness.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Editions of GB/T 44756

Edition	Title	Revision	Status
GB/T 44756-2024	Terminology of flat glass processing machinery	current edition	Current

This page sells the current edition, GB/T 44756-2024. Earlier editions are listed for reference only.

How to Buy GB/T 44756-2024

1Add to cart. Click the "Buy GB/T 44756-2024" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.