GB/T 44670-2024General requirements for safety protection of funeral home staff (English PDF)
殡仪馆职工安全防护通用要求
Open the GB/T 44670-2024 preview as PDF
This is a limited preview
Buy now to download the full PDF (15 pages)
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2024
Implementation date
September 29, 2024
Scope
GB/T 44670-2024 is the English-translated version of 殡仪馆职工安全防护通用要求.
GB/T 44670-2024 is the Chinese national standard covering what protects the people who work in a funeral home rather than the mourners — the safety management system and the emergency plans, the hazards of each functional area from the room where bodies are washed, embalmed and dissected outward, the limits on pathogens and on chemical and physical hazards, the protective equipment and the contaminated clothing, and the occupational health surveillance that catches an exposure the worker cannot feel. First edition, under the Ministry of Civil Affairs. In force from 29 September 2024. Issued on 29 September 2024, it has been in force since 29 September 2024.
Document preview — GB/T 44670-2024
National Standard of the People's Republic of China
- ICS
- 03.160
- Classification
- C 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1
- 4 Basic Requirements
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is issued by the Ministry of Civil Affairs of the People's Republic of China.
This document is under the jurisdiction of the National Technical Committee for Funeral and Interment Standardization (SAC/TC354).
This document was drafted by: Xiamen Huaixiang Etiquette Service Co., Ltd., National Standard Technical Review Center, China Funeral Association, Xinxiang Funeral Funeral Home, Suzhou Kangxi Medical Purification Equipment Co., Ltd., Institute of Environmental and Health-related Product Safety, Chinese Center for Disease Control and Prevention, Xiamen Kaimu Management Consulting Co., Ltd., Hebei Qukun Technology Co., Ltd., Beijing Futian Cemetery, Beijing Babaoshan Funeral Home, Xiamen Minyu Holdings Co., Ltd.
Company, Jinan Funeral Home, Chongqing Quanrong Security Technology Co., Ltd., Bian (Beijing) Technology Co., Ltd., Jinan Jinmin Electronic Technology Co., Ltd. company.
The main drafters of this document are: Wang Lishuan, Zhu Wenjun, Jin Yanfang, Wang Zhongzhou, Wang Yongwei, Sun Zhiyong, Yang Wenjing, Pei Chunyue, Zhou Weihua, Lü Liangwu, Zeng Liwen, Liu Zhongyuan, Ma Liangliang, Li Haijun, Gao Shifeng, Chen Zhongzheng, Zeng Weipeng, Kang Yuting, Zhou Guanping.
General requirements for safety protection of funeral home workers
1 Scope
This document stipulates the basic requirements for the safety protection of funeral home employees, the hazards and protection regulations of functional areas, and the definition of occupational hazards.
Guardianship and management requirements.
This document applies to the safety protection and management of employees in funeral homes.
2 Normative references
GB 19053
GB/T 19054
GB/T 23287
3 Terms and definitions
The terms and definitions defined in GB/T 23287 and the following apply to this document.
3.1
An area where bodies are cleaned, disinfected, embalmed, reconstructed, reshaped, and dissected.
4 Basic Requirements
4.1 Different groups of people should be protected and different types of hazards should be controlled.
4.2 A worker safety management system should be established. Emergency plans should be developed for emergencies such as power outages and fires, and regular staff training and drills should be conducted.
4.3 The safety limit values of pathogens in various places of funeral homes shall comply with the requirements of GB 19053, and the chemical hazard factors shall comply with the relevant regulations of GBZ 2.1.
The physical hazard factors shall comply with the relevant provisions of GBZ 2.2.
4.4 Funeral home employees should be provided with appropriate labor protection supplies.
4.5 There should be parking lots with differentiated functions, and the body transport vehicle should be parked in a dedicated location.
4.6 There should be a room for disposing of contaminated clothing, and measures should be taken to disinfect contaminated clothing.
4.7 Public places such as business halls should be cleaned and disinfected regularly.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of GB/T 44670
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 44670-2024 | General requirements for safety protection of funeral home staff | current edition | Current |
This page sells the current edition, GB/T 44670-2024. Earlier editions are listed for reference only.
How to Buy GB/T 44670-2024
- 1Add to cart. Click the "Buy GB/T 44670-2024" button on this page. You can add more standards before checkout.
- 2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
- 3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 19053-2024 — Safety limits of pathogenic bacteria for funeral and interment place
GB/T 19054-2025 — General technical conditions for fuel oil cremators
GB/T 23287-2023 — Funeral and interment terms
Secure payment via Stripe
Payments accepted
GB/T 44670-2024
$190.00