Valid

GB/T 44083.3-2024Road vehicles - Methods and rules for the evaluation of the usability of child restraint systems and their compatibility with vehicle anchorages - Part 3: Securing and daily maintenance of child occupants in child restraint systems (English PDF)

道路车辆 儿童约束系统以及与车辆固定系统配装的使用性评价方法和规则 第3部分:儿童约束系统中儿童乘员的搭乘及日常维护

Preview PDF

This is a limited preview

Buy now to download the full PDF (19 pages)

Need quotation for your management?

Get a formal quotation for GB/T 44083.3-2024 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Recommended

Issue date

May 28, 2024

Implementation date

December 1, 2024

Scope

GB/T 44083.3-2024 is the English-translated version of 道路车辆 儿童约束系统以及与车辆固定系统配装的使用性评价方法和规则 第3部分:儿童约束系统中儿童乘员的搭乘及日常维护.

GB/T 44083.3-2024 — This document specifies the usability evaluation requirements for child occupants in child restraint systems, as well as the daily maintenance of child restraint systems.

This document applies to the usability evaluation of integrated child restraint systems installed with ISOFIX or vehicle seat belts.

Found what you need?

Document preview — GB/T 44083.3-2024

National Standard of the People's Republic of China

ICS
43.040.60

Issued by: State Administration for Market Regulation

Contents

  • Foreword...3
  • Introduction...5
  • 1 Scope...7
  • 2 Normative references...7
  • 3 Terms and definitions...7
  • 4 Evaluation procedures and scoring rules...9
  • 5 Usability evaluation form...10
  • Appendix A (Informative) Recommended use of the evaluation system...17
  • Appendix B (Informative) Examples of usability evaluation...18
  • References...19

Foreword

This document was drafted in accordance with the provisions of GB/T 1.1-2020

"Directives for standardization - Part 1: Rules for the structure and drafting of

standardizing documents".

This document is Part 3 of GB/T 44083 "Road vehicles - Method and rules for the

evaluation of the usability of child restraint systems and their compatibility with vehicle

anchorages". GB/T 44083 has published the following parts:

- Part 2: Child restraint systems using vehicle belts;

- Part 3: Securing and daily maintenance of child occupants in child restraint systems;

- Part 4: Booster seat and booster cushion.

This document modifies and adopts ISO 29061-4:2017 "Road vehicles - Methods and

criteria for usability evaluation of child restraint systems and their interface with vehicle

anchorage systems - Part 4: Securing of child in child restraint system and daily

handling aspects".

Compared with ISO 29061-4:2017, this document has made the following structural

adjustments:

- RE-ARRANGE the order of terms in Chapter 3, according to the logical

relationship and order of appearance;

- RE-NUMBER the serial numbers of the tables, merging the Tables 1.1 ~ Table 1.2

and Tables 2.1 in ISO 29061-4:2017 into Table 1 and Table 2, respectively.

The technical differences and reasons between this document and ISO 29061-4:2017

are as follows:

- ADD the normative reference GB 27887 (see Chapter 3), as the source of some

child restraint system related terms;

- USE the normative reference GB/T 44083.2 to replace ISO 29061-3 (see 4.1.1), to

adapt to China's technical conditions and improve operability;

- Some terms and definitions adopt the relevant descriptions in GB 27887 (see 3.1,

3.2, 3.4, 3.5.2), which are consistent with relevant national standards and easy to

understand;

- ADD the terms and definitions of 3.2 about children's harness belts, to facilitate the

understanding and use of other terms.

The following editorial changes have been made to this document:

Road vehicles - Method and rules for the evaluation of the

usability of child restraint systems and their compatibility

with vehicle anchorages - Part 3: Securing and daily

maintenance of child occupants in child restraint systems

1 Scope

This document specifies the usability evaluation requirements for child occupants in

child restraint systems, as well as the daily maintenance of child restraint systems.

This document applies to the usability evaluation of integrated child restraint systems

installed with ISOFIX or vehicle seat belts.

2 Normative references

The contents of the following documents constitute essential clauses of this document

through normative references in the text. Among them, for dated references, only the

version corresponding to that date is applicable to this document; for undated references,

the latest version (including all amendments) is applicable to this document.

GB 27887 Child restraint systems for power-driven vehicles

GB/T 44083.2 Road vehicles - Methods and rules for the evaluation of the usability

of child restraint systems and their compatibility with vehicle anchorages - Part 2:

Child restraint systems using vehicle belts (ISO 29061-3:2017, MOD)

ISO 29061-1 Road vehicles - Methods and criteria for usability evaluation of child

restraint systems and their interface with vehicle anchorage systems - Part 1:

Vehicles and child restraint systems equipped with ISOFIX anchorages and

attachments

3 Terms and definitions

The terms and definitions defined in GB 27887, as well as the following terms and

definitions, apply to this document.

3.1

- Child restraint system instruction manual, including instructional videos;

- Instrument for measuring seat belt tension;

- Child dummies specified in GB 27887, which may also be replaced by suitable

children.

4.1.6 The initial state of the child restraint system being evaluated shall be consistent

with the state when the consumer obtains it. The evaluation process includes all steps

from assembling the child restraint system to installing it in the vehicle. It is best to be

conducted by persons who are not familiar with this child restraint system and vehicle.

The evaluation process does not include the process of unpacking the child restraint

system, taking it out of the packaging box and plastic protective cover, taking out the

instruction manual; however, other preparation processes of the child restraint system

before use need to be considered and evaluated in the evaluation form.

4.1.7 The use mode of the child restraint system and the installation location in the

vehicle shall be determined in advance and recorded in the evaluation form.

4.1.8 First evaluate the labeling and instruction manual; finally evaluate the

convenience of child occupant in the child restraint system on the vehicle seat.

4.2 Scoring rules

4.2.1 The scoring rules consist of the evaluation results and weighting coefficients of

each evaluation item. All evaluators give a unified evaluation result for each evaluation

item, the evaluation results are divided into good, medium, poor, with corresponding

scores of 3, 1, 0, respectively. The weighting coefficients are divided into A, B, C, with

corresponding scores of 3, 2, 1, respectively. The score obtained by multiplying the

above two scores is the score of the evaluation item. For example: if the evaluation

result is "good" and the weighting coefficient is "A", the score of this item is the highest

score, that is, 9 points.

4.2.2 The final evaluation result is expressed as a score rate, which is determined by the

ratio of the actual score value to the highest score value that can be obtained. For details,

see Appendix A. The final evaluation results can be graded with reference to Appendix

B.

Note: The highest score values that can be obtained for different products may be different.

5 Usability evaluation form

The usability evaluation form for the riding and daily maintenance of child occupants

in child restraint systems includes three parts: the evaluation of the child restraint

system itself, the evaluation of the riding of child occupants in the child restraint system,

the comprehensive evaluation. Among them, the evaluation form for the child restraint

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 44083.3-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
19 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 44083.3-2024

$300.00