Valid

GB/T 44031-2024Manganese ores - Methods of chemical analysis - General instructions (English PDF)

锰矿石 化学分析方法 通则

Preview PDF

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for GB/T 44031-2024 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

May 28, 2024

Implementation date

December 1, 2024

Scope

GB/T 44031-2024 is the English-translated version of 锰矿石 化学分析方法 通则.

GB/T 44031-2024 is the Chinese national standard giving general instructions for chemical analysis methods for manganese ores, modified to adopt ISO 4297:1978.

It sets out general rules that apply to chemical analysis of manganese ores, and it is intended for use when other standards for manganese ore analysis methods are prepared, revised or applied.

The clauses cover terms and definitions and a general section, with normative references to standards on laboratory practice, water, reagents and manganese ore analysis.

Appendix A compares the structure with the ISO text, and Appendix B lists the many technical differences with their reasons. Issued on 28 May 2024 and applicable from 1 December 2024, it replaces no earlier edition.

Found what you need?

Document preview — GB/T 44031-2024

National Standard of the People's Republic of China

ICS
73.060.20
Classification
D 32

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 General

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

This document is modified to adopt ISO 4297:1978 "General rules for chemical analysis of manganese ores and concentrates". Compared with ISO 4297:1978, this document has many structural adjustments. See Appendix A. This document has more technical differences than ISO 4297:1978.

A list of these technical differences and their causes is given in Appendix B.

1 Scope

This document specifies general methods for the chemical analysis of manganese ores.

This document applies to the formulation, revision and use of standards for chemical analysis methods for manganese ores.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document.

GB/T 1.1 Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents

GB/T 601 Preparation of standard titration solutions for chemical reagents

GB 3100 International System of Units and Its Application

GB/T 3101 General principles for quantities, units and symbols

GB/T 6379.1 Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitions

GB/T 6379.2 Accuracy (trueness and precision) of measurement methods and results Part 2: Determination of repeatability of standard measurement methods Basic methods of sex and reproducibility

GB/T 6682 Specifications and test methods for water used in analytical laboratories

GB/T 8170 Rules for rounding off values and expression and determination of limit values

GB/T 12805 Laboratory glass instrument burette

GB/T 12806 Laboratory glassware single-line volumetric flasks

GB/T 12807 Laboratory glassware graduated pipettes

GB/T 12808 Laboratory glassware single-line pipettes

GB/T 14949.8 Determination of wet water content of manganese ore - Gravimetric method

3 Terms and definitions

There are no terms or definitions that require definition in this document.

4 General

4.1 General

4.1.1 When formulating and revising the standards for chemical analysis methods for manganese ores, the relevant requirements for the preparation of GB/T 1.1 and national standards shall be met.

4.1.2 The current chemical analysis method for manganese ore can be used to verify other analysis methods and standard sample determination analysis, and can also be used as a reference for manganese ore analysis. Routine analytical methods for ores.

4.1.3 When there is more than one method for the same element, the method to be used can be selected according to the composition and content of the sample.

Select a wet analysis method with little interference to the elements to be measured and high precision.

4.1.4 The quantities, units and symbols involved in the chemical analysis methods for manganese ores shall be in accordance with the provisions of GB 3100 and GB/T 3101.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 44031-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 44031-2024

$240.00