GB/T 43907.1-2024Tractors and machinery for agriculture and forestry - Camera interface between tractor and implement - Part 1: Analogue camera interface (English PDF)

GB/T 43907.1-2024 is the English-translated version of 农林拖拉机和机械 拖拉机与机具间的摄像头接口 第1部分：模拟摄像头接口.

GB/T 43907.1-2024 specifies the physical link between an analogue camera mounted on an implement and the operator terminal or monitor installed in the tractor cab, and is Part 1 of the GB/T 43907 series on the camera interface between agricultural and forestry tractors and implements.

Clause 1 adds that the interface specified supports up to two analogue video streams and supplies power to the analogue cameras, and that the document applies to analogue camera interfaces installed in the cab.

Clause 2 cites GB/T 25392-2024 on environmental tests for electrical and electronic equipment in agricultural engineering, given on the page as a note.

Clause 3 defines four terms: camera control unit (CCU), a device that combines the images of several cameras into a single video stream; CAN bus, the controller area network bus; discrete I/O's, input and output lines for electrical signals; and ISO BUS network, a complete set of equipment units using the network connection specified in the ISO 11783 series of standards.

Of clause 4, Technical requirements, the automatic draft prints only 4.1, Physical Link Configuration, which restates the physical link between the implement camera and the cab terminal or monitor and requires a camera control unit on an attachment such as an implement carrying more than two cameras; the text stops there, and the page carries no table of contents, so no clause after 4.1 is shown.

The foreword declares the document equivalent to ISO 20112-1:2018, places it under the National Technical Committee for Agricultural Machinery Standardization (SAC/TC201) and names the China Machinery Industry Federation as its proposer, while the introduction says the purpose of this part is to provide the physical link requirements between the analogue camera on the implement and the operating terminal or monitor in the tractor. It was issued on 25 April 2024 and has applied since 1 November 2024.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

1. 1

   Add to cart

   Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

2. 2

   Checkout

   Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

3. 3

   Instant delivery (0–9 sec)

   Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

4. 4

   Invoice included

   A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.