GB/T 43864.12-2024Display lighting unit - Part 1-2: Terminology and letter symbols (English PDF)
显示光源组件 第1-2部分:术语和文字符号
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 43864.12-2024 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
April 25, 2024
Implementation date
August 1, 2024
Scope
GB/T 43864.12-2024 is the English-translated version of 显示光源组件 第1-2部分:术语和文字符号.
GB/T 43864.12-2024 — This document defines the terms, definitions and text symbols for Display Light Units (DLUs): This document is applicable to the preparation of backlight units (BLUs) for transmissive and semi-transmissive liquid crystal displays, reflective liquid crystal displays and electronic the same term is used in standards related to display light units (DLUs) such as front light units (FLUs) for E-paper:
Found what you need?
Document preview — GB/T 43864.12-2024
National Standard of the People's Republic of China
- ICS
- 31.120
- Classification
- L 53
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Terminology Classification
- 3.2 Basic terminology
- 3.3 Terminology related to passive optical components used in display light source assemblies
- 3.4 Terminology related to solid-state light sources used in display light source assemblies
- 3.5 Terms related to front light source components
- 3.6 Performance and specification related terms
- 3.7 Backlight dimming related terms
- 4 Text symbols
- Appendix A (Informative) Example Figure
- Index
- Figure A:1 Backlight concepts for transmissive and semi-transmissive LCD displays
- Figure A:2 Example of edge-lit backlight assembly
- Figure A:3 Example of direct-lit backlight assembly
- Figure A:4 Visual definition of terms related to passive optical components (such as front frame, backplane, etc:)
- Figure A:5 Brightness uniformity of backlight assembly
- Figure A:6 Polar coordinate system for evaluating angular brightness distribution
- Figure A:7 Angular brightness on the backlight assembly
- Figure A:8 shows an example of spectral power distribution of a light source component
- Figure A:9 Incoherent light spread function for evaluating the optical characteristics of a single zone of a zoned dynamic backlight assembly
- Figure A:10 Light diffusion functions of backlight components with three different optical structures
- Figure A:11 Checkerboard pattern for evaluating brightness uniformity of backlight components
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting:
This document is part 1-2 of GB/T 43864 "Display Light Source Components": GB/T 43864 has been published in the following parts:
--- Part 1-2: Terminology and text symbols:
This document is equivalent to IEC 62595-1-2:2016 "Display light source assemblies Part 1-2: Terminology and text symbols":
Introduction
The standardization of display light source component terminology is the basis for related standardization activities, ensuring technical consistency within the display professional field and between related fields:
The consistency and logical integrity of the language will help coordinate the concept systems and the terminology of different languages:
constitute:
--- Part 1-2: Terminology and text symbols: The purpose is to establish the terms, definitions and symbols for display light source units (DLUs):
Display Light Components Part 1-2: Terminology and text symbols
1 Scope
This document defines the terms, definitions and text symbols for Display Light Units (DLUs):
This document is applicable to the preparation of backlight units (BLUs) for transmissive and semi-transmissive liquid crystal displays, reflective liquid crystal displays and electronic the same term is used in standards related to display light units (DLUs) such as front light units (FLUs) for E-paper:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document:
Part 845:Lighting]
Note: GB/T 2900.65-2004 Electrical terminology lighting (IEC 60050-845:1987, MOD)
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in IEC 60050-845 and the following apply:
3.1 Terminology Classification the terms for display light unit (DLU), such as backlight unit (BLU) and front light unit (FLU) are classified as follows:
a) Basic terms related to display light source components (3:2);
b) terms related to passive optical components used in display light source assemblies (3:3);
c) terms related to solid-state light sources used in display light source assemblies (3:4);
d) Terms related to front light source components (3:5);
e) performance and specification related terms (3:6);
f) Backlight dimming related terms (3:7):
3.2 Basic terminology 3.2.1 Display lighting unit; DLU A light source assembly for identifying an image displayed on a non-self-luminous electronic display device:
3.2.2
Backlight unit; BLU
A display light source assembly placed on the back of a non-self-luminous electronic display device (such as a transmissive and semi-transmissive and semi-reflective liquid crystal device):
Note: For examples, see Appendix A, Figure A:1:
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 43864.12-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 43864.12-2024
$530.00