GB/T 43436-2023Smart factory—Automation system for flexible manufacturing—General requirement (English PDF)
智能工厂 面向柔性制造的自动化系统 通用要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 43436-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 27, 2023
Implementation date
June 1, 2024
Scope
GB/T 43436-2023 is the English-translated version of 智能工厂 面向柔性制造的自动化系统 通用要求.
GB/T 43436-2023 sets the general requirements for the automation systems that make flexible manufacturing possible, built around what it calls plug-and-produce: the system recognises a newly connected or modified machine, configures its control logic and folds it into the running production flow without manual intervention.
It specifies the device information model, with its basic requirements, basic properties and control, simulation and scheduling models, the rapid development requirements for logical and physical interface configuration, the virtual commissioning requirements with equipment verification specifications and static attribute and dynamic behaviour verification, and the flexible operation requirements covering device access policy, task rescheduling and flexible equipment operation.
Clause 1 applies it to flexible manufacturing automation systems and to upgrading conventional control systems for customised production. Issued on 27 November 2023, it has applied since 1 June 2024.
Found what you need?
Document preview — GB/T 43436-2023
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General principles and requirements
- 5 Device Information Model
- 5.1 Basic requirements
- 5.2 Basic properties
- 5.3 Control model
- 5.4 Simulation model
- 5.5 Scheduling model
- 6 Rapid Development Requirements
- 6.1 Function description
- 6.2 Logical interface configuration requirements
- 6.3 Physical interface configuration requirements
- 7 Virtual commissioning requirements
- 7.1 Function description
- 7.2 Equipment verification specifications
- 7.3 Static attribute verification
- 7.4 Dynamic Behavior Verification
- 8 Flexible operation requirements
- 8.1 Function description
- 8.2 Device access policy
- 8.3 Task rescheduling
- 8.4 Flexible operation of equipment
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
1 Scope
This document specifies the equipment information model, rapid development requirements, virtual debugging requirements, and flexible operation for flexible manufacturing automation systems. Ask to wait.
This document is applicable to automation systems for flexible manufacturing, and also to the upgrade of traditional control systems for personalized customized production. Transformation.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.
GB/T 38177-2019 CNC machining production line flexible manufacturing system
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 flexible manufacturing
A production method that can quickly and flexibly configure according to dynamic changes in products, processes or equipment.
3.2
The computer information control system and the automatic material storage and transportation system are organically combined to process a set of different processes and processing rhythms in any order.
A group of automated production equipment that can freely schedule and manage workpieces in a timely manner.
3.3 flexible manufacturing line
A manufacturing line that is connected by multiple pieces of equipment supporting plug-and-play production and equipped with automatic transportation devices.
3.4 Plug and produce
When equipment is added or modified in the flexible manufacturing line, it can automatically identify the newly connected equipment or equipment that needs to be modified, and accurately configure equipment control for it. logic and integrate it into the integrated production model of the running production process.
4 General principles and requirements
Flexible manufacturing requires that the automation system can automatically identify the access device, accurately configure the device control logic, and integrate it into the running In the production process, there is no need to manually operate and change the equipment. The above process is called plug-and-produce, and for plug-and-produce The equipment produced needs to be based on a standardized equipment information model and through development processes such as engineering development, debugging and verification, and online operation to achieve the necessary
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 43436-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 38177-2019 — CNC machining line—Flexible manufacturing system
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 43436-2023
$210.00