GB/T 43023-2023Guidelines for the measurement method of nonlinearity for surface acoustic wave(SAW) and bulk acoustic wave(BAW) devices in radio frequency(RF) (English PDF)
射频声表面波(SAW)器件和体声波(BAW)器件的非线性测量指南
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 43023-2023 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
September 7, 2023
Implementation date
January 1, 2024
Scope
GB/T 43023-2023 is the English-translated version of 射频声表面波(SAW)器件和体声波(BAW)器件的非线性测量指南.
GB/T 43023-2023 — This document specifies radio frequency (RF) surface acoustic wave (SAW) devices and components used in communications, measuring instruments, radar systems, and consumer electronics products.
Measurement method of nonlinear signals of acoustic wave (BAW) devices (such as filters, duplexers, etc.). This document includes the basic characteristics and measurement guidelines of nonlinearity, and is suitable for the establishment and corresponding measurement system of RF SAW/BAW devices.
Development of measurement procedures. The purpose of this document is not to explain theory, nor to attempt to cover all possible situations that may arise in actual environments.
It is intended to enable users to prepare for new Application Note some more basic issues before ordering RF SAW/BAW devices to ensure that users get satisfactory device performance.
Found what you need?
Document preview — GB/T 43023-2023
National Standard of the People's Republic of China
- ICS
- 31.140
- Classification
- L 21
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- 1 Scope1
- 2 Normative reference documents1
- 3 Terms and Definitions1
- 4 Basic characteristics of nonlinear systems4
- 4.1 Nonlinear system characteristics4
- 4.2 Nonlinear measuring device6
- 4.3 Effect of circuit impedance on nonlinear measurement9
- 4.4 Effect of circuit nonlinearity11
- 5 Nonlinear measurements11
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is equivalent to IEC 62761.2014 "Nonlinear Measurements of Radio Frequency Surface Acoustic Wave (SAW) Devices and Bulk Acoustic Wave (BAW) Devices"
guide".
This document has made the following minimal editorial changes.
---"OIP" in Figure 3 is corrected to "OIP2" based on the technical content of the context.
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
1 Scope
This document specifies radio frequency (RF) surface acoustic wave (SAW) devices and components used in communications, measuring instruments, radar systems, and consumer electronics products.
Measurement method of nonlinear signals of acoustic wave (BAW) devices (such as filters, duplexers, etc.).
This document includes the basic characteristics and measurement guidelines of nonlinearity, and is suitable for the establishment and corresponding measurement system of RF SAW/BAW devices.
Development of measurement procedures.
The purpose of this document is not to explain theory, nor to attempt to cover all possible situations that may arise in actual environments. It is intended to enable users to prepare for new
Application Note some more basic issues before ordering RF SAW/BAW devices to ensure that users get satisfactory device performance.
2 Normative reference documents
This document has no normative references.
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 General terminology
3.1.1
Antenna duplexer composed of radio frequency bulk acoustic wave resonators.
3.1.2
Filters characterized by bulk acoustic waves. Bulk acoustic waves are usually generated by a pair of electrodes and propagate along the thickness direction.
3.1.3
bulkacousticwavebulkacousticwave;BAW
A sound wave that travels along the upper and lower surfaces of a piezoelectric material and through the entire thickness of the piezoelectric body.
Note. This sound wave is excited by metal electrodes made on the upper and lower surfaces of the piezoelectric layer.
3.1.4
cut-offfrequency
The relative attenuation value reaches the passband frequency corresponding to the specified amplitude value.
3.1.5
duplexer duplexer
A device used in frequency division duplex systems that enables the system to send and receive signals simultaneously through a common antenna.
3.1.6
It consists of a piezoelectric layer sandwiched between two electrode layers. The top and bottom electrodes have no stress on their surfaces, and the bottom consists of a cavity or cavity as shown in Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
How to Download GB/T 43023-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 43023-2023
$270.00