GB/T 42941.1-2023Protective equipment for sport - Protective equipment for martial arts - Part 1: General requirements and test methods (English PDF)
运动护具 搏击运动护具 第1部分:通用要求与试验方法
This is a limited preview
Buy now to download the full PDF (19 pages)
Need quotation for your management?
Get a formal quotation for GB/T 42941.1-2023 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
August 6, 2023
Implementation date
December 1, 2023
Scope
GB/T 42941.1-2023 is the English-translated version of 运动护具 搏击运动护具 第1部分:通用要求与试验方法.
This document specifies protective equipment for martial arts: its harmlessness, its ergonomics, the way it is held in place, sizing, the area it protects, its impact performance, its marking and the information the manufacturer provides, and it describes the test methods.
The document applies to protective equipment for taekwondo, karate, kickboxing and similar unarmed combat sports. The additional requirements and test methods for particular items of equipment are given in the corresponding parts of ISO 21924.
It is the first part of the standard and gives the general requirements and test methods.
Found what you need?
Document preview — GB/T 42941.1-2023
National Standard of the People's Republic of China
- ICS
- 97.220.01; 13.340.01
- Classification
- Y 55
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative reference documents
- 3 Terms and definitions
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
This document is Part 1 of GB/T 42941 "Sports Protective Gear - Combat Sports Protective Gear". GB/T 42941 has released the following part.
---Part 1: General requirements and test methods.
This document is equivalent to ISO 21924-1:2017 "Combat Sports Protective Gear Part 1: General Requirements and Test Methods". This document has made the following minimal editorial changes.
---In order to coordinate with the existing standards, the name of the standard is changed to "Sports Protective Gear - Combat Sports Protective Gear - Part 1: General Requirements and Tests" method";
---Change "EU authorized agent" to "domestic authorized agent" to coordinate with the national standard [see Chapter 6 a), Chapter 7 b)].
Introduction
my country is a major producer of protective gear for combat sports, but the national standards for protective gear for combat sports are still blank. To standardize combat sports in my country The production of protective gear is in line with relevant international standards, and it is necessary to formulate national standards for protective gear for combat sports in my country.
GB/T 42941 (all parts) "Sports Protective Gear - Combat Sports Protective Gear" adopts ISO 21924 (all parts) and remains consistent. Currently It is planned to be divided into 8 parts.
---Part 1: General requirements and test methods. The purpose is to summarize the common content of combat sports protective gear into general basic requirements.
---Part 2: Additional requirements and test methods for instep, leg and arm guards. The purpose is to supplement this type of protective gear with similar shapes. Use requirements and test methods.
---Part 3: Additional requirements and test methods for body protection. The purpose is to supplement special requirements and tests for larger types of protective gear for protective postures method.
---Part 4: Additional requirements and test methods for head protection. The purpose is to supplement special requirements for this type of protective gear with more important protective functions. Sum test method.
---Part 5: Additional requirements and test methods for crotch and belly protectors. The purpose is to supplement special requirements and regulations for crotch and abdominal protective gear. experiment method.
---Part 6: Additional requirements and test methods for women's breast protectors. The purpose is to supplement special requirements and tests for special functional protective gear method.
---Part 7: Additional requirements and test methods for gloves and foot gloves. The purpose is to supplement special requirements and test methods for protective gear.
---Part 9: Additional requirements and test methods for martial arts Sanda head protection. The purpose is to supplement special requirements for special protective gear for martial arts and Sanda. and test methods.
Sports protective gear, combat sports protective gear Part 1: General requirements and test methods Warning---Protective gear that complies with this document is intended to protect the wearer from bruises, abrasions, lacerations, fractures, and physical injuries, but is not intended to prevent Any serious sports injury.
1 Scope
This document specifies the harmlessness, ergonomics, restraint, sizing, protective area, impact properties, marking and identification by the manufacturer of combat sports protective gear. The information provided describes the test method.
This document is applicable to sports protective gear for Taekwondo, Karate, Kickboxing and other similar unarmed combat.
Additional requirements and test methods for specific protective gear are specified in the corresponding parts of ISO 21924.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.
ISO 105-A02 Textiles Color Fastness Test Part A02.Gray Sample Card for Assessing Discoloration (Textiles-Testsfor Note: GB/T 250-2008 Gray sample card for evaluating discoloration in textile color fastness testing (ISO 105-A02.1993, IDT)
ISO 105-A03 Textiles Color Fastness Test Part A03.Gray Sample Card for Evaluating Staining (Textiles-Testsfor Note: GB/T 251-2008 Gray sample card for textile color fastness test and evaluation of staining (ISO 105-A03.1993, IDT)
ISO 105-E04 Tests for color fastness of textiles Part E04.Color fastness to perspiration (Textiles-Testsforcolour Note: GB/T 3922-2013 Textile color fastness test Color fastness to perspiration (ISO 105-E04.2013, MOD)
3 Terms and definitions
The following terms and definitions apply to this document.
The standardized terminology databases of ISO and IEC can be found at.
3.1 Protective equipment
In combat sports, equipment worn on the human body is mainly used to resist external forces.
3.2 Zone of protection
The minimum geometric range of protective gear that protects the wearer.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 105
How to Download GB/T 42941.1-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 42941.1-2023
$150.00