GB/T 4294-2010Aluminium hydroxide (English PDF)

1 Scope

This standard specifies the aluminum hydroxide [Al (OH) 3] requirements, test methods, inspection rules and signs, packaging, transportation and storage.

This standard applies to the production of inorganic aluminum salt, flame retardant fillers and the production of other specialty alumina products with raw aluminum hydroxide.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 6609.22 alumina chemical analysis methods and determination of physical performance sampling

GB/T 6609.23 preparation and storage of alumina chemical analysis methods and determination of physical performance of the sample

Determination of GB/T 6609.28 alumina chemical analysis and determination of physical performance of less than 60µm particle size distribution of fine powder

Wet screening

GB/T 8170 repair value expressed about the rules and limit values and judgment

YS/T 534 (all parts), chemical analysis of aluminum hydroxide

YS/T 667.1 Chemicals alumina chemical analysis methods - Part 1. filler aluminum hydroxide and quasi boehmite of cadmium, chromium, vanadium

Determination by inductively coupled plasma atomic emission spectrometry

YS/T 667.2 Chemicals alumina chemical analysis methods - Part 2. filler aluminum hydroxide and quasi boehmite arsenic, mercury, lead

Determination of the content of hydride generation - inductively coupled plasma emission spectrometry

3 Requirements