GB/T 42870-2023Non-destructive testing - Specific methodology and general evaluation criteria for acoustic emission testing of fibre-reinforced polymers (English PDF)

1 Scope

This document describes the general principles for acoustic emission testing of fiber reinforced polymer (FRP) components and structures. Materials used in FRP Performance characterization and verification tests, manufacturing quality control of components and structures, online testing of service performance, and health monitoring, etc.

This document describes the use of acoustic emission techniques to assess the integrity of fiber-reinforced polymer components or structures or to identify severe

Specific methods of accumulating damage or aggravating damage to major areas.

This document describes the general FRP acoustic emission detection and evaluation criteria and gives the procedures for establishing the evaluation criteria.

This document provides a qualitative evaluation criterion format for acoustic emission test data in online inspection and post-analysis, for different test locations.

Simplified comparison with the acoustic emission test results obtained by the testing agency brings convenience.

Note. Structural integrity evaluation based on acoustic emission cannot be evaluated solely based on the evaluation criteria given in this article. In many cases, further testing and testing are required.

Evaluation (e.g. using other non-destructive testing methods or fracture mechanics calculations, etc.).

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations

For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

tionofNDTpersonnel)

Note. GB/T 9445-2015 Qualification and certification of non-destructive testing personnel (ISO 9712.2012, IDT)

ISO 12716.2001 Non-destructive testing acoustic emission testing vocabulary (Non-destructive testing-Acousticemissionin-

Note. GB/T 12604.4-2005 Non-destructive testing terminology acoustic emission testing (ISO 12716.2001, IDT)

EN13477-1 Characteristics of acoustic emission equipment for non-destructive testing Part 1.Equipment description (Non-destructive testing-

EN13477-2 Characteristics of acoustic emission equipment for non-destructive testing Part 2.Verification of operating characteristics (Non-destructive testing-

EN14584 Plane positioning of acoustic emission sources for non-destructive testing of acoustic emission metal pressure equipment verification tests (Non-

EN15495 Non-destructive testing of acoustic emission metal pressure-bearing equipment verification test regional positioning of acoustic emission sources (Non-

3 Terms and definitions

The terms and definitions defined in ISO 12716.2001 and the following apply to this document.

GB/T 42869 | GB/T 41350 | GB/T 41655 | GB/T 42871 | […]