GB/T 42769-2023Prosthetics and orthotics - Functional deficiencies - Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis (English PDF)

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"

drafting:

This document is equivalent to ISO 8551:2020 "Patients treated with prosthetics and orthotics, clinical treatment objectives,

Description of functional requirements for orthotics":

The following minimal editorial changes have been made to this document:

--- The scope has increased the note, indicating the applicable limit;

--- Notes are added to the normative reference documents, and the national standardization documents with consistent correspondence are given:

Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:

Introduction

The quality of life of people is affected by their health status, impairment of bodily functions and structures, and resulting limitation of activities:

Influence:

The purpose of orthotic treatment is to address functional and structural impairments, reduce activity limitations, and thereby improve participation in daily life:

This document provides clinical practitioners with the ability to document the patient's condition, clinical treatment goals, and the orthotics provided to achieve those goals:

The method by which relevant information can be requested:

Developing this unified approach for comparing clinical practice and treatment outcomes across institutions is of great importance to epidemiologists and health sector managers

Also valuable:

Prosthetics and Orthotics Deficiency Orthotics

Treated patient, clinical treatment goal, orthosis

Description of functional requirements

1 Scope

This document gives a description of the patient to be treated with an orthosis, the clinical goals of the treatment and the functional requirements of the orthosis:

NOTE: This document is intended for orthotic clinical practitioners to record information:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references

For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to

this document:

ISO 8549-1 Terminology of prosthetics and orthotics Part 1: Basic terminology for external limb prosthetics and external orthotics

externalorthoses)

Note: GB/T 14191:1-2009 Prosthetics and Orthotics Terminology Part 1: Basic terms for external limb prostheses and external orthotics

(ISO 8549-1:1989, IDT)

Note: GB /Z 40839-2021 Classification and description of prosthetics and orthotics orthotics and orthotic components (ISO 13404:2007, IDT)

3 Terms and Definitions

The terms and definitions defined in ISO 8549-1, ISO 8549-3 and ISO 13404 and the following apply to this document:

3:1

The spatial relationship between the ends of bone segments:

NOTE: Alignment of bone segments is determined by their integrity and/or shape:

3:2

joint alignmentofajoint

The spatial relationship between the bone segments that make up a joint:

NOTE: Joint alignment is determined by the integrity, shape, and motion of the associated muscle and ligament/joint capsule tissues of the skeletal segments that make up the joint: These factors also constrain

Mode and range of joint motion:

3:3

Stabilitystability

The ability of a skeletal segment or joint to maintain alignment under muscular and/or external loads: