GB/T 42089-2022Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products (English PDF)
防止儿童开启包装 非药品用不可再封口包装的要求与试验方法
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 42089-2022 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
December 30, 2022
Implementation date
April 1, 2023
Scope
GB/T 42089-2022 is the English-translated version of 防止儿童开启包装 非药品用不可再封口包装的要求与试验方法.
GB/T 42089-2022 — This document specifies the requirements for child-resistant non-pharmaceutical non-reclosable packaging and describes the requirements for child-resistant non-pharmaceutical Test method for non-reclosable packaging.
This document applies to non-reclosable packaging containing one or more individual units.
Found what you need?
Document preview — GB/T 42089-2022
National Standard of the People's Republic of China
- ICS
- 55.020
- Classification
- A 80
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Preface
- Introduction
- 1 Scope1
- 2 Normative references1
- 3 Terms and Definitions1
- 4 Requirements1
- 5 Trial2
- 6 Test report5
- APPENDIX A (INFORMATIVE) GUIDELINES FOR CHILDREN EXPERIMENTAL SUPERVISO RS7
- Appendix B (Normative) Children's Continuous Test Result Record Figure8
- Appendix C (informative) Suitability of selected sampling procedures for continuous tests9
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is modified to adopt ISO 28862.2018 "Packaging to prevent children from opening packaging requirements and requirements for non-resealable packaging for non-pharmaceuticals"
experiment method".
Compared with ISO 28862.2018, this document has made the following structural adjustments.
---5.1.1~5.1.2 corresponds to 5.1 in ISO 28862.2018.
The technical differences between this document and ISO 28862.2018 and their reasons are as follows.
--- Changed the description of the scope (see Chapter 1) to make it concise and standardized;
--- Deleted the note in 4.1, which has no practical effect on the use of this document, and the application of this document will not be affected after deletion;
---Delete 5.3.1, and repeat the expression with the following 5.3.2 and 5.3.3.After deletion, the readability of the file is improved and the file is convenient
application;
--- Deleted 6.1i), 6.2g), 6.3e), which has no practical effect on the use of this document, and will not affect the application of this document after deletion.
The following editorial changes have been made to this document.
--- Modified the name of the standard;
--- Deleted the references section.
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
Introduction
In accidental injury accidents among children, the accidental injury caused by eating by mistake ranks the third. Unless parents or guardians take necessary precautions
Safeguards, such as keeping potentially dangerous products out of the reach of children and promoting child-resistant packaging, are further reductions
One of the fundamental ways of children's accidental injury hidden danger.
Child-resistant packaging is designed to create a physical barrier between children and potentially dangerous products. Although there is still no
Functional packaging can completely prevent children from 42 months to 51 months from opening it, but since the introduction of this packaging, children under 5 years of age have accidentally
Ingestion of potentially dangerous products has improved. In addition, the product identification and product information provided by the manufacturer, for the safe use of the product
Also very important.
In order to avoid confusion about the degree of hazard of the product, child-resistant packaging is limited to use when it is defined as potentially dangerous or required to be used in
on products used under supervision.
With the technological innovation in the field of protective packaging, the design idea of preventing children from opening the packaging has gradually expanded, and its usage has continued to increase. for
It is important to agree on requirements and test methods in order to avoid gaps in understanding in areas of paramount importance to the safety of young children.
Prevent children from opening the packaging
Requirements and test methods for sealed packaging
1 Scope
This document specifies the requirements for child-resistant non-pharmaceutical non-reclosable packaging and describes the requirements for child-resistant non-pharmaceutical
Test method for non-reclosable packaging.
This document applies to non-reclosable packaging containing one or more individual units.
2 Normative references
This document has no normative references.
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Prevent children from opening the package child-resistantpackage
Packaging that cannot be easily opened by children (or obtain the contents), but does not affect the normal use of adults.
3.2
Non-reclosable child-resistant package non-reclosable child-resistant package
When all or part of the contents are taken out, the child-proof package cannot be sealed normally again.
3.3
substitute substitute product
Inert articles similar to the actual contents.
Example. powder, tablet or colorless liquid, etc.
3.4
unit unit
The sum of the contents that can be removed from the smallest individually enclosed packaging that comes into direct contact with the product.
3.5
Type approval typeapproval
Procedures for certifying certain types of non-reclosable packaging made of a specified set of materials as child-resistant.
3.6
Independent use package singleusepackage
For independent use, each packaged separately to protect one or more units (3.4) of the packaging.
4 requirements
4.1 General requirements
When testing non-reclosable child-resistant packaging in accordance with the requirements of this document, the appropriate opening shall be set in accordance with 4.2.1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 42089-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 42089-2022
$210.00