Valid

GB/T 41808-2022Image parameter values for high dynamic range television for use in production and programme exchange (English PDF)

Also coversGBT41808-2022

Open the GB/T 41808-2022 preview as PDF

Preview — first pages of GB/T 41808-2022

This is a limited preview

Buy now to download the full PDF

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

October 12, 2022

Implementation date

October 12, 2022

Scope

GB/T 41808-2022 (Image parameter values for high dynamic range television for use in production and programme exchange) is available as an English-translated PDF.

GB/T 41808-2022 — This document specifies the basic picture parameter values and reference viewing environments involved in the production and exchange of high dynamic range television programmes. This document is applicable to high dynamic range television program production and program exchange, as well as the design, production, and production of high dynamic range television systems and equipment. production, acceptance, operation and maintenance.

Document preview — GB/T 41808-2022

National Standard of the People's Republic of China

ICS
33.160.40
Classification
M 70

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Abbreviations
  • 5 Image parameter values
  • 5.1 Image Spatial and Temporal Characteristics

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"

drafted.

This document modifies the use of ITU-RBT.2100-2.2018 "Picture parameters for high dynamic range television for production and international programme exchange"

value". The file type is adjusted by the ITU recommendation to the national standard of our country.

Compared with ITU-RBT.2100-2.2018, this document has more structural adjustments. Struct number change pair between two files

See Appendix A for the list.

The technical differences between this document and ITU-RBT.2100-2.2018 and their reasons are as follows.

--- Deleted 30Hz, 30/1.001Hz, 25Hz, 24Hz and 24/1.001Hz frame rates in ITU-RBT.2100-2.2018,

To adapt to my country's TV system and application needs (see Table 1 of ITU-RBT.2100-2.2018);

--- Replaced the normative reference document ITU-RBT.814 (see Table 3) with GY/T 326-2019, which was modified to adopt international standards;

--- Table 1~Table 3, Table 6~Table 9 have added the requirement type clauses that meet the corresponding table;

---The references in Table 4, Table 5, and Table 10 are modified to requirement-type clauses.

The following editorial changes have been made to this document.

--- In order to be consistent with my country's technical standard system, the standard name is changed to "High Dynamic Range TV Program Production and Exchange Image Parameter Values";

--- Deleted the "scope" and "keywords" of ITU-RBT.2100-2.2018;

--- Added a note for the description of "CIE1931XYZ color space" in Table 2;

--- Added references.

Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.

1 Scope

This document specifies the basic picture parameter values and reference viewing environments involved in the production and exchange of high dynamic range television programmes.

This document is applicable to high dynamic range television program production and program exchange, as well as the design, production, and production of high dynamic range television systems and equipment.

production, acceptance, operation and maintenance.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations

documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to

this document.

GY/T 326-2019 PLUGE test signal specification and calibration procedure for monitor brightness and contrast calibration (ITU-RBT.

814-4.2018, MOD)

ISO 11664-2.2007 Chromaticity Part 2.CIE standard illuminance (Colorimetry-Part 2.CIEstandardilumi-

3 Terms and Definitions

There are no terms and definitions that need to be defined in this document.

4 Abbreviations

The following abbreviations apply to this document.

HLG. HybridLog-Gamma

5 Image parameter values

5.1 Image Spatial and Temporal Characteristics

The spatial and temporal characteristics of the image shall comply with the provisions of Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Referenced standards

Normative references

ISO 11664

How to Buy GB/T 41808-2022

  1. 1Add to cart. Click the "Buy GB/T 41808-2022" button on this page. You can add more standards before checkout.
  2. 2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
  3. 3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
  4. 4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41808-2022

$245.00

$210.00for partners