Valid

GB/T 41769-2022Methods for chemical analysis of cadmium zinc telluride—Determination of zinc and cadmium contents—Inductively coupled plasma atomic emission spectrometry (English PDF)

碲锌镉化学分析方法 锌和镉含量的测定 电感耦合等离子体原子发射光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41769-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2022

Implementation date

February 1, 2023

Scope

GB/T 41769-2022 is the English-translated version of 碲锌镉化学分析方法 锌和镉含量的测定 电感耦合等离子体原子发射光谱法.

GB/T 41769-2022 gives the method for determining the zinc and cadmium content of cadmium zinc telluride by inductively coupled plasma atomic emission spectrometry.

The sample is dissolved in nitric acid and hydrochloric acid, the solution is made up to volume and weighed to 0.0001 g, yttrium serves as the internal standard element, the characteristic line intensities of the elements are measured on the spectrometer, and the contents are read from a standard curve.

The document lists the reagents and materials, among them hydrochloric acid of density 1.19 g/mL, nitric acid of density 1.42 g/mL, and zinc and cadmium standard solutions prepared from metal of at least 99.99 % purity.

It cites GB/T 6682. It was issued on 14 October 2022 and has applied since 1 February 2023.

Found what you need?

Document preview — GB/T 41769-2022

National Standard of the People's Republic of China

ICS
77.120.99
Classification
H 13

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Principles
  • 5 Reagents or materials

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

1 Scope

This document specifies the method for the determination of zinc and cadmium content in cadmium zinc telluride.

This document is applicable to the determination of zinc and cadmium content in cadmium zinc telluride. The amount is 18.00%~46.00%.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB/T 6682 Analysis Laboratory Water Specifications and Test Methods

3 Terms and Definitions

There are no terms and definitions that need to be defined in this document.

4 Principles

After the sample was dissolved in nitric acid and hydrochloric acid, the solution was fixed to volume and then weighed (accurate to 0.0001g), using yttrium as the internal standard element, using inductively coupled plasma The daughter atomic emission spectrometer was used to measure the intensity of the characteristic spectral line of the element to be tested in the solution, and the content of zinc, cadmium and cadmium in the sample were calculated through the standard curve. content.

5 Reagents or materials

Unless otherwise specified, only reagents confirmed as analytical grade and laboratory secondary water in accordance with GB/T 6682 are used in the analysis.

5.1 Hydrochloric acid (rho=1.19g/mL).

5.2 Nitric acid (rho=1.42g/mL).

5.3 Hydrochloric acid (1 10).

5.4 Zinc standard solution. Weigh 0.10g of metallic zinc (wZn>=99.99%) (accurate to 0.0001g) into a 250mL beaker, add 15mL Hydrochloric acid (5.1), 5 mL of nitric acid (5.2), cover with a watch glass, heat at low temperature until completely dissolved, remove, cool to room temperature, rinse the surface with a small amount of water Transfer the test solution to a pre-dried and weighed 250mL volumetric flask (m0), dilute it with water to the mark, and weigh the mass (m1) (accurate to 0.001g), mix well, 1g of this solution contains about 400µg zinc.

5.5 Cadmium standard solution. Weigh 0.10g metal cadmium (wCd>=99.99%) (accurate to 0.0001g) into a 250mL beaker, add 15mL […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 41769-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41769-2022

$210.00