GB/T 41614-2022Estimated methods of shale gas recoverable reserves (English PDF)
页岩气可采储量评估方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41614-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 11, 2022
Implementation date
November 1, 2022
Scope
GB/T 41614-2022 is the English-translated version of 页岩气可采储量评估方法.
GB/T 41614-2022 sets out how the recoverable reserves of a shale gas project are estimated and judged. It specifies the estimation methods and the comprehensive evaluation requirements, and it applies to proven shale gas recoverable reserves; other grades may follow it by reference.
Recoverable reserves are split into technically and economically recoverable ones: the first by a static, a dynamic or a probabilistic method, the second by the cash flow or the economic limit method, with rules for the economic parameters and a sensitivity analysis.
The evaluation then weighs reasonableness, reserve scale, economic value, uncertainty and resistance to risk, and every figure is reported as a low, best and high estimate, at P90, P50 and P10.
Its clause 2 states that there are no normative references. It was issued on 11 July 2022 and has applied since 1 November 2022.
Found what you need?
Document preview — GB/T 41614-2022
National Standard of the People's Republic of China
- ICS
- 75.060
- Classification
- E 24
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General Rules for the Evaluation of Recoverable Reserves
- 5 Estimation of technically recoverable reserves
- 5.1 Static method
- 5.2 Dynamic method
- 5.3 Probabilistic method
- 6 Estimation of economically recoverable reserves
- 6.1 General
- 6.2 Cash flow method
- 6.3 The Economic Limit Method
- 6.4 Estimated parameters for economic evaluation
- 6.5 Economic Evaluation Estimate Requirements
- 6.6 Sensitivity analysis
- 7 Comprehensive evaluation of recoverable reserves
- 7.1 Reasonableness
- 7.2 Reserve scale
- 7.3 Economic value
- 7.4 Degree of uncertainty
- 7.5 Anti-risk ability
- Appendix A (normative) Reserve scale
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the estimation methods and comprehensive evaluation requirements for recoverable reserves of shale gas.
This document is applicable to the estimation and evaluation of proven recoverable reserves of shale gas, and the evaluation of recoverable reserves of shale gas of other grades can be implemented by reference.
2 Normative references
There are no normative references in this document.
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Project
A representation of the connection between shale gas reservoirs and the decision-making process.
Note: A project can be the development of a single shale gas reservoir, or the comprehensive development of a single well, a group of wells or multiple shale gas reservoirs.
3.2 Low estimate
Through the implementation of the project, a conservative estimate of the actual production volume from shale gas reservoirs.
Note: If the probability method is adopted, the probability that the actual recovery amount equals or exceeds the estimated value is at least 90% (P90).
3.3 High estimate
Through the implementation of the project, an optimistic estimate of the actual production volume from shale gas reservoirs.
Note: If the probability method is used, the probability that the actual recovery amount equals or exceeds the estimated value is at least 10% (P10).
3.4 Best estimate
Through the implementation of the project, the most probable estimate of the actual production volume from the shale gas reservoir.
Note: If the probability method is adopted, the probability that the actual recovery amount equals or exceeds the estimated value is at least 90% (P90).
4 General rules for the assessment of recoverable reserves
4.1 The recoverable reserves are divided into technical recoverable reserves and economic recoverable reserves.
4.2 During each exploration and development stage from proving to abandonment, it is necessary to select the suitable ones according to the geological engineering data and technical and economic conditions at the time of evaluation. A good evaluation method comprehensively estimates recoverable reserves.
4.3 The recoverable reserves should be assessed annually. When geological knowledge changes, or with changes in technical and economic conditions and the addition of new data, Technically recoverable and economically recoverable reserves need to be reassessed.
4.4 According to the uncertainty of the parameters in the evaluation method, reflect the uncertainty range of recoverable reserves, and estimate the low valuation (P90), high valuation (P10) and best valuation (P50) of recoverable reserves.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 41614-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 41614-2022
$150.00