GB/T 41478-2022Quality control of production process—System model and architecture—Assembly and casting (English PDF)
生产过程质量控制 系统模型与架构 装配与铸造
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41478-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 15, 2022
Implementation date
November 1, 2022
Scope
GB/T 41478-2022 is the English-translated version of 生产过程质量控制 系统模型与架构 装配与铸造.
GB/T 41478-2022 gives the system model and architecture of the quality control system of an assembly and casting digital workshop. It sets the model of the system, the quality control of the assembly process and the quality control of the casting process, that is what has to be measured, recorded and acted upon along each of the two.
It applies to the process quality control of assembly and casting digital workshops and may be used to strengthen it. Manufacturers, foundries and system integrators use it. Issued on 15 April 2022, it has applied since 1 November 2022.
Found what you need?
Document preview — GB/T 41478-2022
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 19
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Abbreviations
- 5 System Model and Architecture
- 5.1 System Structure Composition
- 5.2 System functions and requirements
- 5.3 System Model Technical Requirements
- 5.4 Quality Analysis and Evaluation
- 5.5 Quality Traceability and Improvement
- 6 Assembly Quality Control
- 6.1 General requirements
- 6.2 Technical requirements for prior control
- 6.3 Technical requirements for in-process control
- 6.4 Technical requirements for post-event control
- 7 Casting Quality Control
- 7.1 General requirements
- 7.2 Technical requirements for prior control
- 7.3 Technical requirements for in-process control
- 7.4 Technical requirements for post-event control
- Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the system model and architecture of the production process quality control of the assembly and casting digital workshop, the quality control of the assembly process, the casting process Manufacturing process quality control, etc.
This document is applicable to the quality control of the production process of the assembly and casting digital workshop, and can be used to improve the quality control of the assembly and casting production process control capacity.
2 Normative references
There are no normative references in this document.
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Production process
The whole process of turning raw materials into finished products. [Source: GB/T 4863-2008, 3.1.9]
3.2 Manufacturing
A function or activity that transforms a material from a raw or semi-finished state to a further completed state. [Source: GB/T 19114.44-2012, 3.1.7]
3.3 System
An assemblage of one or more processes, hardware, software, facilities, and personnel that has the ability to meet a defined requirement or objective ability. [Source: GB/T 26224-2010, 3.26]
3.4 Model
An abstract description of an aspect of real-world affairs in any way (including mathematical, physical, symbolic, graphical, or descriptive). [Source: GB/T 25485-2010, 3.32]
3.5 Assembly
The process of mating and connecting parts or components to make them semi-finished or finished. [Source: GB/T 51218-2017, 12.1.1]
3.6 Virtual assembly
The process of assembly analysis and simulation of the assembly model formed by assembly modeling. Including one or more assembly sequence planning, assembly
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Similar standards
How to Download GB/T 41478-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 41478-2022
$270.00