GB/T 41421-2022Digital fittings - Vocabulary and terminology used for the virtual garment (English PDF)
数字化试衣 虚拟服装用术语和定义
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41421-2022 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
April 15, 2022
Implementation date
November 1, 2022
Scope
GB/T 41421-2022 is the English-translated version of 数字化试衣 虚拟服装用术语和定义.
GB/T 41421-2022 — This document defines terms and definitions for virtual garments in digital fitting systems. Digital fitting systems include virtual fabrics, virtual Fabric properties, virtual garment patterns, virtual pattern properties, virtual seams, virtual garments, and virtual garments worn on a virtual mannequin fit assessment.
This document applies to all practical application areas of digital fitting systems, online communication of garments and all stages of commerce, including design accounting, manufacturing, sales and customer management.
Found what you need?
Document preview — GB/T 41421-2022
National Standard of the People's Republic of China
- Classification
- Y 75
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 General terms
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document is modified to adopt ISO 18163.2016 "Vocabulary and terminology for virtual clothing for digital fitting of clothing".
This document has the following structural adjustments compared to ISO 18163.2016.
--- Added the chapter "Normative References".
The technical differences between this document and ISO 18163.2016 and their reasons are as follows.
a) Changed the definition of virtual fabric properties (see 3.1.1) to maintain consistency with the names in clothing software;
b) Changed the definition and expression of virtual clothing simulation terms (see 3.1.4) for easier understanding;
c) Added the terms, definitions and schematic diagrams of template stress (see 3.1.5.3 and Figure 7). Template stress is the current mainstream software evaluation virtual
One of the main display forms of the simulated fitting effect;
d) Changed the definition of the term internal line and added an example of the note (see 3.2.1.3) to facilitate understanding and avoid ambiguity;
e) Changed the example in the term layer structure, and revised "jacket" to "suit" (see 3.2.2.2).
The following editorial changes have been made to this document.
a) To harmonize with existing standards, change the name of the standard to "Terms and Definitions for Digital Fitting Virtual Clothing";
b) Added the scope of application of the document (see Chapter 1) to clarify the applicable objects;
c) correct the wording in the footnote of the term "gap" by changing "darker" to "lighter" (see 3.1.5.4);
d) Use domestic software to draw Figure 1~Figure 6, Figure 8~Figure 10 and replace the ISO standard corresponding Figure 1~Figure 9;
e) Correct the data type of the plane model in Table B.3 to "2Dmodel" (see Appendix B);
f) Added index.
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
1 Scope
This document defines terms and definitions for virtual garments in digital fitting systems. Digital fitting systems include virtual fabrics, virtual
Fabric properties, virtual garment patterns, virtual pattern properties, virtual seams, virtual garments, and virtual garments worn on a virtual mannequin
fit assessment.
This document applies to all practical application areas of digital fitting systems, online communication of garments and all stages of commerce, including design
accounting, manufacturing, sales and customer management.
2 Normative references
There are no normative references in this document.
3 Terms and Definitions
3.1 General terms
3.1.1
Attribute characteristics of virtual fabrics, such as tensile properties, softness, thickness, mass per unit area, etc.
NOTE. Virtual fabric properties can be imported or imported from the database.
3.1.2
A graphic consisting of closed curves used to mark the digitized pattern area of the virtual garment (3.1.3).
Example. see Figure 1.
3.1.2.1
A pattern consisting of contour lines and a number of interior lines (3.2.1.3) used to represent seams, interior openings, crease lines and other garment features.
3.1.2.2
virtual suture
Lines used to assemble virtual garment patterns.
Example. see Figure 2.
NOTE. For each pair of pieces to be stitched together, define a corresponding virtual seam line. Arrange pieces in space by connecting each pair of virtual seams on the piece
point (3.2.1.1) to stitch together the virtual pieces, and finally create the virtual garment (3.1.3).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 41421-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 41421-2022
$270.00