GB/T 41416-2022Textiles—Determination of alpha-bromocinnamaldehyde and 1,3-propanesultone (English PDF)
纺织品 α-溴代肉桂醛和1,3-丙烷磺酸内酯的测定
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41416-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 15, 2022
Implementation date
November 1, 2022
Scope
GB/T 41416-2022 is the English-translated version of 纺织品 α-溴代肉桂醛和1,3-丙烷磺酸内酯的测定.
GB/T 41416-2022 is the Chinese national method for determining alpha-bromocinnamaldehyde and 1,3-propanesultone in textiles by gas chromatography-mass spectrometry.
It gives the principle, the reagents and materials, the apparatus, the preparation and extraction of the sample, the chromatographic and spectrometric conditions, the identification and quantification of the two compounds, the calculation and the test report.
It applies to textile products of every kind, where these substances are restricted. Mills, brands and testing laboratories use it. Issued on 15 April 2022, it has applied since 1 November 2022.
Found what you need?
Document preview — GB/T 41416-2022
National Standard of the People's Republic of China
- ICS
- 59.080.01
- Classification
- W 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Terms and Definitions4
- 4 Principles4
- 5 Reagents and materials4
- 6 Instruments and equipment5
- 7 Analysis steps5
- 8 Result calculation7
- 9 Limit of quantitation and precision7
- 10 Test report8
- Appendix A (Informative) GC-MS analysis conditions for 1,3-propanesultone and alpha-bromocinnamaldehyde9
- Appendix B (Informative) Total ion chromatogram of GC-MS analysis of 1,3- propanesultone and alpha-bromocinnamaldehyde10
1 Scope
This document describes a method for the determination of the content of alpha- bromocinnamaldehyde and 1,3-propanesultone in textiles by using the gas chromatography-mass spectrometry (GC-MS). This document applies to all types of textile products.
2 Normative references
There are no normative references in this document.
3 Terms and Definitions
There are no terms and definitions that need to be defined in this document.
4 Principles
After ultrasonic extraction and filtration of the samples with ethyl acetate, determine it by the gas chromatography-mass spectrometer, qualitatively analyze it by the selected ion mode, and then quantitatively analyze it by the external standard method.
5 Reagents and materials
Unless otherwise specified, the reagents used shall be of analytical grade.
5.1 Ethyl acetate.
5.3 1,3-propanesultone (CAS No.: 1120-71-4): purity >=95%.
5.4 Standard stock solution: Accurately weigh an appropriate amount of alpha- bromocinnamaldehyde (5.2) and 1,3-propanesultone (5.3) reference materials respectively, and dilute them with ethyl acetate (5.1) respectively to prepare the standard stock solutions with a concentration of about 500 mg/L.
5.5 Mixed standard working solution: Accurately pipette a certain volume of standard stock solution (5.4) as needed, and dilute it stepwise with ethyl acetate (5.1) into a series of mixed standard working solutions with appropriate concentrations.
5.2 Alpha-bromocinnamaldehyde (CAS No.: 5443-49-2): purity >=99%
Note: The standard stock solution shall be stored in the dark at 0 °C~4 °C, and the validity period is 6 months.
Note: The mixed standard working solution shall be stored in the dark at 0 °C~4 °C, and it is valid for 1 month.
6 Instruments and equipment
6.1 Gas chromatography-mass spectrometer: It shall be equipped with an electron impact ion source (EI).
6.2 Balance: The division value shall be 0.1 mg and 0.01 g.
6.3 Temperature-controlled ultrasonic instrument: The temperature control range shall be 20 °C~60 °C, and the working frequency shall be (40±5) kHz.
6.4 Glass extraction tube with stopper: 100 mL.
6.5 Concentration bottle: It shall be 100 mL with a ground-glass stopper.
6.6 Rotary evaporator.
6.7 Nitrogen blower.
6.8 Organic filter membrane: 0.45µm.
7 Analysis steps
7.1 Preparation and treatment of specimens
Take a representative sample, cut it into pieces with a size of less than 5 mm × 5 mm, and mix well. Accurately weigh 1.0 g of the above sample, and the weight shall be accurate to 0.01 g; place it in a 100 mL stoppered glass extraction tube (6.4), add 20 mL of ethyl acetate (5.1), and perform ultrasonic extraction for 20 min at (40±5) °C.
8 Result calculation
8.1 Calculate the content of alpha-bromocinnamaldehyde or 1,3-propanesultone in the sample according to formula (1): Where:
X --- The content of alpha-bromocinnamaldehyde or 1,3-propanesultone in the sample, in milligrams per kilogram (mg/kg);
A --- The peak area of alpha-bromocinnamaldehyde or 1,3-propanesultone in the sample solution; c --- The mass concentration of alpha-bromocinnamaldehyde or 1,3-propanesultone in the standard working solution, in milligrams per liter (mg/L);
As --- The peak area of alpha-bromocinnamaldehyde or 1,3-propanesultone in the standard working solution;
V --- The volume of the sample solution that is accurate to the scale, in milliliters (mL); m --- The mass of the sample, in grams (g).
8.2 The measurement results of this method are expressed as the calculation results of alpha-bromocinnamaldehyde and 1,3-propanesultone respectively, and the calculation results are rounded to one decimal place.
9 Limit of quantitation and precision
9.1 Limit of quantitation
In this method, the limit of quantification of alpha-bromocinnamaldehyde is 0.2 mg/kg, and the limit of quantification of 1,3-propanesultone is 0.5 mg/kg.
9.2 Precision
In the same laboratory, the same operator uses the same equipment, according to the same test method, and tests the same test object independently within a short period.
The absolute difference between the two test results obtained shall be not greater than 10% of the arithmetic mean of the two measured values; take the confidence coefficient
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Similar standards
How to Download GB/T 41416-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 41416-2022
$150.00