GB/T 41312.1-2022Test method for measurement of the permeability of chemical equipment—Part 1: Graphite and lining equipment (English PDF)
化工用设备渗透性检测方法 第1部分:石墨及其衬里设备
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41312.1-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 9, 2022
Implementation date
October 1, 2022
Scope
GB/T 41312.1-2022 is the English-translated version of 化工用设备渗透性检测方法 第1部分:石墨及其衬里设备.
GB/T 41312.1-2022 is the first part of the Chinese series on measuring the permeability of chemical equipment, and it covers impervious graphite equipment and graphite lined equipment.
It describes the principle of the permeability test and specifies the test equipment and materials, the specimens, the test procedure and the test report. It applies to the permeability testing of impervious graphite equipment, and not to graphite towers nor to equipment lined with graphite plates.
Makers of graphite heat exchangers and the chemical plants that buy them use it. Issued on 9 March 2022, it has applied since 1 October 2022.
Found what you need?
Document preview — GB/T 41312.1-2022
National Standard of the People's Republic of China
- ICS
- 71.120
- Classification
- G 94
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principles
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
This document is the first part of GB/T 41312 "Testing method for permeability of chemical equipment". GB/T 41312 has issued the following part.
--- Part 1: Graphite and its lining equipment.
Introduction
GB/T 41312 "Test method for permeability of chemical equipment" aims to accurately measure the permeability performance of chemical equipment. It is planned to be divided into three parts. composition.
--- Part 1: Graphite and its lining equipment;
--- Part 2: Equipment for plastic fiber composite materials;
--- Part 3: Plastics and their lining equipment.
Penetration performance is very important to chemical equipment, it is directly related to the quality, safety and service life of chemical equipment.
Due to its excellent anti-corrosion performance and heat-resistant performance, chemical equipment is used to contain extremely or highly hazardous toxicity.
If the medium is easy to penetrate due to its manufacturing process and other problems, it will cause the leakage of toxic medium, endanger human safety, and cause environmental damage. environmental pollution and other vicious events. After the release and implementation of this document, it will play a very good guiding role in the permeability detection of chemical equipment, and will play a role in improving the chemical industry.
The quality level of equipment and the specification of the manufacturing process of equipment in this industry are of great significance.
1 Scope
This document describes the principle of the permeability detection method for chemical impermeable graphite equipment, and specifies the test equipment and materials, samples, Test procedure and test report.
This document applies to the permeability testing of impermeable graphite equipment, but not to impermeable graphite equipment towers and graphite equipment lined with graphite plates. Prepared penetration testing.
2 Normative references
There are no normative references in this document.
3 Terms and Definitions
There are no terms and definitions that need to be defined in this document.
4 Principles
After the impermeable graphite container or the closed space inside the sample is pumped to a certain degree of vacuum, helium gas of a certain purity and pressure is injected, and the pressure is maintained to a certain degree.
After time, the leaked helium gas was detected by a helium mass spectrometer leak detector on the outside of the container and the sample.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 41312.1-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 41312.2-2023 — Test method for measurement of the permeability of chemical equipment—Part 2:Fiber reinforced thermosetting plastic equipment
GB/T 41312.3-2023 — Test method for measurement of the permeability of chemical equipment—Part 3: Plastics and lining equipment
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 41312.1-2022
$150.00