GB/T 41102-2021General technical requirements for injection moulding system for PET preform in packaging field (English PDF)
包装PET瓶坯注塑成型模具系统通用技术要求
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41102-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2021
Implementation date
July 1, 2022
Scope
GB/T 41102-2021 is the English-translated version of 包装PET瓶坯注塑成型模具系统通用技术要求.
GB/T 41102-2021 sets the general technical requirements for the injection mould systems that produce PET bottle preforms for packaging. It applies to the design, manufacture and inspection of these moulds for bottles used in the food, daily chemical, pharmaceutical and other industries.
The standard covers terms and definitions, models, main structures, basic parameters and working conditions, technical requirements, test methods and inspection rules, and the signs, nameplates, packaging, transportation and storage of the mould.
Its references include the PET resin for bottles, PET preforms, hot runner systems, mould steels, compressed air quality and rubber and plastic injection moulding machines.
Mould makers, packaging machinery builders and bottlers use it. It was issued on 31 December 2021 and has applied since 1 July 2022.
Found what you need?
Document preview — GB/T 41102-2021
National Standard of the People's Republic of China
- ICS
- 55.200
- Classification
- J 83
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the terms and definitions, models, main structures, Basic parameters and working conditions, technical requirements, test methods, inspection rules, signs, nameplates, packaging, transportation and storage requirements.
This document is applicable to the preform injection molding mold system (hereinafter referred to as "mold") of PET bottles for packaging in the food, daily chemical, pharmaceutical and other industries design, manufacture, inspection, etc.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Graphical signs of packaging, storage and transportation
GB/T 230.1 Rockwell hardness test of metallic materials - Part 1. Test method
GB 2894 Safety Signs and Guidelines for their Use
GB/T 5226.1 Mechanical and Electrical Safety Mechanical and Electrical Equipment Part 1. General Specifications
GB/T 7311 Packaging Machinery Classification and Model Compilation Method
GB/T 9969 General Principles of Instruction Manual for Industrial Products
GB/T 13277.1-2008 Compressed Air Part 1. Pollutant Purification Level
GB/T 13306 Signs
GB/T 13384 General technical conditions for packaging of mechanical and electrical products
GB/T 14253 General technical conditions for light industrial machinery
GB/T 17931 Polyethylene terephthalate (PET) resin for bottles
GB/T 19891 Hygienic requirements for mechanical safety mechanical design
GB/T 19923 Urban Wastewater Recycling Industrial Water Quality
GB/T 25156 General technical requirements and testing methods for rubber and plastic injection molding machines
BB/T 0060 Packaging Containers Polyethylene Terephthalate (PET) Preforms
JB/T 6057 Specifications of steel for plastic molding compound
JB/T 12649 Specifications of Hot Runner System for Plastic Injection Molding
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Preform
Semi-finished products for blowing bottles.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB 2894Safety colours and safety signs
- GB/T 5226.1Electrical safety of machinery -- Electrical equipment of machines -- Part 1: General requirements
- GB/T 7311Classification and editorial nominating method for packaging machinery
- GB/T 9969General principles for preparation of instructions for use of industrial products
GB/T 19891
Similar standards
How to Download GB/T 41102-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
BB/T 0060-2025 — Packaging containers - Polyethyleneterephthalate (PET) preform
GB 2894-2025 — Safety colours and safety signs
GB/T 13306-2011 — Plates
Secure payment via Stripe
Payments accepted
GB/T 41102-2021
$300.00